A rapid-screening approach to detect and quantify microplastics based on fluorescent tagging with Nile Red.

Maes T, Jessop R, Wellner N, Haupt K, Mayes AG. · 2017

Read A rapid-screening approach to detect and quantify microplastics based on fluorescent tagging with Nile Red. by Maes T, Jessop R, Wellner N, Haupt K, Mayes AG. (2017) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/europmc-pmc5353725.txt.

Introduction

Thomas Maes, Rebecca Jessop, Nikolaus Wellner, Karsten Haupt, and Andrew G. Mayes devised a fast screen for tiny plastic bits in Scientific Reports in 2017. Plastic waste breaks down in seas and soils into microplastics, scraps too small to see with ease. Counting them in field samples is slow, since the gold test needs costly scans of each grain. A cheap first pass could sort the bulk fast.

Their trick uses a dye called Nile Red, which clings to plastic and glows under blue light. After a density float-off and filtering, a plain photo through an orange filter shows the glowing specks for counting by software. Fine zoom shots can catch bits a few micrometers wide. The dye's hue shifts with the plastic's surface traits, which may even sort types. In sea mud tests, the glowing count matched the slow scan count speck for speck.

Catalog record

CREATORMaes T, Jessop R, Wellner N, Haupt K, Mayes AG.
YEAR2017
COLLECTIONPAPERS
FORMATTXT
FILE SIZE45 KB
LICENSECC BY 4.0
RIGHTSCC BY
SOURCEEurope PMC

Source: https://europepmc.org/articles/PMC5353725

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

A rapid-screening approach to detect and quantify microplastics based on fluorescent tagging with Nile Red By Thomas Maes, Rebecca Jessop, Nikolaus Wellner, Karsten Haupt, Andrew G Mayes Published in: Scientific Reports DOI: 10.1038/srep44501 ABSTRACT Abstract A new approach is presented for analysis of microplastics in environmental samples, based on selective fluorescent staining using Nile Red (NR), followed by density-based extraction and filtration. The dye adsorbs onto plastic surfaces and renders them fluorescent when irradiated with blue light. Fluorescence emission is detected using simple photography through an orange filter. Image-analysis allows fluorescent particles to be identified and counted. Magnified images can be recorded and tiled to cover the whole filter area, allowing particles down to a few micrometres to be detected. The solvatochromic nature of Nile Red also offers the possibility of plastic categorisation based on surface polarity characteristics of identified particles. This article details the development of this staining method and its initial cross-validation by comparison with infrared (IR) microscopy. Microplastics of different sizes could be detected and counted in marine sediment samples. The fluorescence staining identified the same particles as those found by scanning a filter area with IR-microscopy. Plastic litter, both at the macro and micro scale, is widespread and has accumulated worldwide in the marine environment. Due to ultraviolet (UV) radiation, oxidation and mechanical forces, plastic items break down into increasingly smaller microplastic fragments, below 5 mm in diameter1,2. Micro-sized fragments such as synthetic fibres from textiles, facial cleansers and many other products also introduce microplastics directly2,3,4. This has led to a build-up of microplastics of varying sizes, composed of different polymer types, across a wide array of marine habitats. Because of their size, microplastics are available and ingested by a broad range of organisms5,6,7,8,9,10,11, possibly threatening ecosystems and even human health12. The risks that microplastics pose to marine life and humans are widely recognized and have been included in national and international marine protection strategies, policies and legislation (e.g. EU Marine Strategy Framework Directive13). Knowledge of plastic concentrations, spatial and temporal changes, sizes, polymer distributions and fragmentation dynamics are a prerequisite for understanding fate and impact of microplastics. To monitor spatial and temporal trends of microplastics, simple, cost-effective and standardized protocols, capable of efficiently and accurately enumerating microplastics in a wide variety of environmental matrices, need to be developed. Various floatation and density approaches have been described for microplastic studies in sediments14. Using the density increase caused by added salt solutions, microplastics float so they can be separated, filtered and analysed. Water column studies can use density separation or direct filtration methods for sample recovery. Biota studies will need to separate microplastics from the surrounding tissues after which they can be processed similar to water or sediment samples15. Such approaches lead to many filters containing various materials, including the putative microplastic fragments, which need to be identified and counted. For larger microplastics (0.3 to 5 mm) visual sorting is an accepted approach and one of the most commonly used methods for the identification of microplastics (using type, shape, degradation stage, and colour as criteria), but it still requires expert knowledge and judgement while being rather time consuming. In addition to visual quantification, recent studies have applied chemical and physical characterisation16, vibrational spectroscopy5,14,17,18,19,20 or electron microscopy21,22,23 to reduce the risk of false positive/negative misidentification, to determine polymer types and to introduce automated routines22. Fourier transform infrared (FTIR) and Raman microspectroscopy have been used to allow polymer identification of particles down to a few μm24. There are several recent publications on automating IR-microscopy procedures for microplastic identification20,25,26 to make it less labour intensive, but the techniques are not routinely applied for monitoring, because they are limited by slow speed, high cost and poor spectral resolution, which makes processing of larger sample sets by micro-spectroscopy challenging. IR microscopy requires technical expertise and assignment of individual particles from their spectral fingerprints is error prone, especially for small particles (<20 μm) where microscope resolution inevitably includes spectral signals from the surroundings (i.e. other adjacent particles or the filter itself). Polymers collected from the marine environment may have been exposed to UV induced photodegradation, thermal degradation and biodegradation, altering the original polymer composition27. Bacteria within the coastal and marine environment can rapidly colonize microplastics, forming successional plastisphere-specific bacterial assemblages28. These degradation processes and biofilms, in combination with polymer additives, will further complicate spectroscopic analysis due to spectral changes and insufficient reference spectra for polymer degradation products29. This problem becomes more apparent for small particles, where the high surface to volume ratio makes the signals from surface material more significant. Many particles will thus fall into an unidentifiable category which is difficult to distinguish from natural polymers such as lignocellulose, chitin etc. Despite these shortcomings, the above-mentioned spectroscopic methods are the methods of choice for most studies of microscopic plastic particles, currently the only available approaches. To carry out the kinds of spatial and temporal studies necessary for emerging monitoring requirements, as well as addressing new research questions arising from increased awareness of the microplastics problem, much cheaper, faster and more easily applied methods urgently need to be created. Fluorescence staining methods provide a simple and sensitive approach to highlighting specific objects or structures in biological and medical studies. Andrady30 proposed the use of a lipophilic fluorescent dye, such as Nile Red (NR) to stain microplastics in surface water samples, facilitating visualisation under a microscope, but this observation has not been followed up to date. NR is a lipid soluble fluorescent dye which allows the in-situ staining of lipids. It has been frequently employed to evaluate the lipid content of animal cells and microorganisms, such as mammalian cells, bacteria, yeasts and microalgae31,32. Furthermore, NR is solvatochromic, so its fluorescence emission spectrum shifts depending on the polarity of its environment. This behaviour might allow microplastics to be categorised into types based on their general hydrophobicity e.g. polyolefin, polyaromatic, polar (polyesters/nylons), or it could provide a useful indicator to evaluate residence time via temporal changes in surface properties due to oxidation or biofouling in the environment. In this manuscript, we present a detailed development and evaluation of this approach for the rapid screening of sediment samples for microplastics. RESULTS Multiple dyes (Oil red EGN, Eosin B, Rose Bengal, Hostasol Yellow 3G and NR) were tested for their ability to adsorb to plastics. NR was adopted, since it was the most effective in terms of adsorption and fluorescence intensity. The optimum dye concentration (between 1 and 1000 μg mL−1) and incubation time (between 5 minutes and 66 hours) for visibility was determined. Using higher dye concentrations increased the fluorescence intensity of the dyed particles, but also increased the background signal from the Whatman filters. A working concentration of 10 μg mL−1 gave a good balance between visibility, speed and background signal. Fluorescence intensity increased rapidly with incubation time, but plateaued after 30 to 60 minutes and remained constant up to 66 hours. Incubation times longer than 30 to 60 minutes led to gradual aggregation of the unadsorbed dye (which has low water solubility) and stronger colouring of the filters, especially in the presence of higher concentrations of zinc chloride used to increase density. For most studies, incubation with 10 μg mL−1 NR for 30 minutes was

Read the complete text