One-dimensional organic lead halide perovskites with efficient bluish white-light emission.

Yuan Z, Zhou C, Tian Y, Shu Y, Messier J, Wang JC, van de Burgt LJ, Kountouriotis K, Xin Y, Holt E, Schanze K, Clark R, Siegrist T, Ma B. · 2017

Read One-dimensional organic lead halide perovskites with efficient bluish white-light emission. by Yuan Z, Zhou C, Tian Y, Shu Y, Messier J, Wang JC, van de Burgt LJ, Kountouriotis K, Xin Y, Holt E, Schanze K, Clark R, Siegrist T, Ma B. (2017) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/europmc-pmc5216108.txt.

Introduction

Zhao Yuan and many colleagues reported a one-dimensional organic lead halide perovskite in Nature Communications in 2017. Perovskites are crystal materials that can be made from solution and tuned for light-based devices such as solar cells and lamps. Most studied forms are flat layers or three-dimensional blocks, while chain-like one-dimensional forms had barely been explored.

The new material builds chains of lead bromide units wrapped in organic cations, forming wire-like bundles. That tight structure confines excited states so strongly that they trap themselves and release the energy as broad bluish white light. Bulk single crystals converted about a fifth of absorbed light into emitted light, and tiny crystals about an eighth, both strong results for white emission. The work points to a fresh route toward efficient light emitters built from bulk quantum materials.

Catalog record

CREATORYuan Z, Zhou C, Tian Y, Shu Y, Messier J, Wang JC, van de Burgt LJ, Kountouriotis K, Xin Y, Holt E, Schanze K, Clark R, Siegrist T, Ma B.
YEAR2017
COLLECTIONPAPERS
FORMATTXT
FILE SIZE35 KB
LICENSECC BY 4.0
RIGHTSCC BY
SOURCEEurope PMC

Source: https://europepmc.org/articles/PMC5216108

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

One-dimensional organic lead halide perovskites with efficient bluish white-light emission By Zhao Yuan, Chenkun Zhou, Yu Tian, Yu Shu, Joshua Messier, Jamie C Wang, Lambertus J van de Burgt, Konstantinos Kountouriotis, Yan Xin, Ethan Holt, Kirk Schanze, Ronald Clark Published in: Nature Communications DOI: 10.1038/ncomms14051 ABSTRACT Abstract Organic-inorganic hybrid metal halide perovskites, an emerging class of solution processable photoactive materials, welcome a new member with a one-dimensional structure. Herein we report the synthesis, crystal structure and photophysical properties of one-dimensional organic lead bromide perovskites, C4N2H14PbBr4, in which the edge sharing octahedral lead bromide chains [PbBr4 2−]∞ are surrounded by the organic cations C4N2H14 2+ to form the bulk assembly of core-shell quantum wires. This unique one-dimensional structure enables strong quantum confinement with the formation of self-trapped excited states that give efficient bluish white-light emissions with photoluminescence quantum efficiencies of approximately 20% for the bulk single crystals and 12% for the microscale crystals. This work verifies once again that one-dimensional systems are favourable for exciton self-trapping to produce highly efficient below-gap broadband luminescence, and opens up a new route towards superior light emitters based on bulk quantum materials. Organic-inorganic hybrid metal halide perovskites, an important class of crystalline materials with excellent low-temperature solution processability and band structure tunability, have been known for decades1,2,3,4. They have received great attention in recent years for applications in various types of optoelectronic devices, including photovoltaic cells, light emitting diodes and optically pumped lasers5,6,7,8. As far as the structure is concerned, three-dimensional (3D) structure, two-dimensional (2D) layered structure, and quasi-2D structure containing layer(s) of corner sharing metal halide octahedrons have been explored extensively with much less done in one-dimensional (1D) structure, in which the metal halide octahedrons are connected in a chain9,10,11,12,13. The rich chemistry of metal halide perovskites enables numerous ways of band structure control and colour tuning by manipulating the metals, halides and organic components. Besides colour tunable narrow emissions achieved for 2D and 3D perovskites14,15,16,17,18,19, broadband white-light emission has been realized recently in corrugated 2D perovskites with photoluminescence quantum efficiency (PLQE) of up to 9%, as a result of exciton self-trapping in the inter-layer inorganic quantum wells20,21,22,23,24. It has been well known that exciton self-trapping, due to exciton–phonon interaction, is critically dependent on the dimensionality of a crystalline system25,26. Lowering the dimensionality to 1D makes exciton self-trapping easier at any exciton–phonon interaction strength27,28,29. Indeed, exciton self-trapping has been observed in 1D metal halides, which exhibited broadband luminescence with large Stokes shifts of approximately 1 eV (refs 30, 31). According to this principle, 1D metal halide perovskites with exciton self-trapping could be a perfect model for highly efficient white-light emitting materials, which however have not been discovered yet. Here we report bulk and microscale crystalline 1D organic lead bromide perovskites C4N2H14PbBr4 with edge sharing octahedral lead bromide chains [PbBr4 2−]∞ sitting in the columnar cages created by the C4N2H14 2+ cations. This unique 1D structure results in strong quantum confinement with the formation of self-trapped excited states. Broadband bluish white-light emissions peaked at 475 nm with a large full width at half maximum of around 157 nm have been obtained for both the bulk and microscale crystals at room temperature, which have PLQEs of approximately 20% and 12%, respectively. RESULTS Synthesis and characterization Bulk lead bromide perovskite crystals were synthesized in approximately 60% yield by reacting lead (II) bromide (PbBr2) with N, N′-dimethylethylenediamine (CH3NHCH2CH2NHCH3) in hydrogen bromide (HBr) aqueous solution at room temperature. Microscale perovskites with the same chemical formula were also synthesized at an extremely high yield of around 95%. The structure and composition of these hybrid perovskites were fully characterized using single crystal X-ray diffraction (SCXRD), powder X-ray diffraction (PXRD), transmission electron microscopy (TEM), atomic force microscopy (AFM), proton nuclear magnetic resonance (1H NMR) and thermogravimetric analysis (TGA). Their photophysical properties were studied using steady state and time-resolved photoluminescence spectroscopies. Details of material synthesis and characterization can be found in the Methods. Structural characterization Figure 1a shows an optical microscopic image of the needle-shaped bulk 1D lead bromide perovskite crystals. Single crystalline needles as long as several centimeters can be prepared by simple solution growth. The structure of these bulk crystals was determined using SCXRD (Supplementary Table 1). The 1D structure is depicted in Fig. 1b, with [PbBr4 2−]∞ chains sitting in the rhombic columnar cages composed of C4N2H14 2+ cations. This structure can be considered as the bulk assembly of 1D core-shell quantum wires, in which the insulating organic shells surround the core lead bromide wires (Fig. 1c). The lead bromide wires are based on double edge-shared octahedral PbBr6 2− units (Fig. 1d), different from the typical corner sharing octahedral PbBr6 2− units found in 2D and 3D metal halide perovskites4, or mixed octahedral-trigonal prismatic PbI3− units found in 1D hybrid lead iodides32. Figure 1e shows a TEM image of the microscale perovskites, with their electron diffraction pattern along [210] zone axis shown in Fig. 1f. The d-spacings were determined as 7.20±0.1 Å for the (002) plane and 2.93±0.1 Å for the (121) plane, consistent with the values obtained from SCXRD for the bulk crystals. The PXRD patterns of the microscale crystals show almost identical features as for the ball-milled powders of the bulk single crystals (Fig. 1g). All these results confirm that the microscale perovskite crystals prepared by the one-pot synthesis possess the same composition and crystal structure as the bulk single crystals prepared by solution growth. 1H NMR, TGA and AFM were also used to characterize the microscale perovskite crystals and the results can be found in the Supplementary Figs 1, 2 and 3, and Supplementary Table 2. Instead of the needle shape observed in the bulk crystals, the microscale crystals display a hexagonal shape, with a lateral dimension size of 0.5–2 μm, and a thickness of 1–1.5 μm. The relatively short reaction time in one-pot synthesis is believed to suspend the extended crystallization along the metal halide chain direction. [Figure: Structural characterization of bulk and microscale 1D lead bromide perovskite crystals.(a) Optical image of needle-shaped 1D lead bromide perovskite single crystals. (b) Structure of 1D perovskite C4N2H14PbBr4 (red spheres: lead atoms; green spheres: bromine atoms; blue spheres: nitrogen atoms; grey spheres: carbon atoms; purple polyhedrons: PbBr6 4− octahedrons; hydrogen atoms were hidden for clarity). (c) View of an individual lead bromide quantum wire wrapped by the organic cations. (d) View of an individual lead bromide quantum wire with edge sharing octahedrons. (e) Transmission electron microscopy (TEM) image of the microscale 1D perovskite crystals. (f) Electron diffraction pattern along [210] zone axis. (g) Powder X-ray diffraction (PXRD) patterns of the bulk and microscale 1D perovskite crystals, as well as the simulated PXRD patterns based on the single crystal structure.] Photophysical properties We have investigated the photophysical properties of the prepared bulk and microscale 1D lead bromide perovskites. Figure 2a,b show the photo-images of the bulk perovskite crystals under ambient light and UV (365 nm) irradiation, respectively. We find that the needle-shaped crystals are colourless and show strong bluish white-light emission upon UV irradiation. The absorption and emission spectra of the bulk and microscale crystals are shown in Fig. 2c. High energy absorption with peaks at around 375 nm was observed for both the bulk and microscale crystals. Upon excitation

Read the complete text