Platinum single-atom and cluster catalysis of the hydrogen evolution reaction.
Cheng N, Stambula S, Wang D, Banis MN, Liu J, Riese A, Xiao B, Li R, Sham TK, Liu LM, Botton GA, Sun X. · 2016
Read Platinum single-atom and cluster catalysis of the hydrogen evolution reaction. by Cheng N, Stambula S, Wang D, Banis MN, Liu J, Riese A, Xiao B, Li R, Sham TK, Liu LM, Botton GA, Sun X. (2016) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/europmc-pmc5141386.txt.
Introduction
Niancai Cheng and eleven co-authors made single-atom platinum catalysts, reporting in Nature Communications in 2016. Platinum drives the hydrogen-making reaction in water splitting better than any other material, but it is scarce and costly, and in normal catalysts only the surface atoms work.
Using atomic layer deposition, the team placed isolated platinum atoms and tiny clusters on nitrogen-doped graphene, so nearly every platinum atom sits exposed. For hydrogen production the single-atom catalyst ran up to 37 times more active than commercial platinum-on-carbon and stayed stable. X-ray and computer analyses tie the performance to the electronic state of the lone platinum atoms on the doped graphene, a route to squeezing far more work from far less platinum.
Catalog record
| CREATOR | Cheng N, Stambula S, Wang D, Banis MN, Liu J, Riese A, Xiao B, Li R, Sham TK, Liu LM, Botton GA, Sun X. |
|---|---|
| YEAR | 2016 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 51 KB |
| LICENSE | CC BY 4.0 |
| RIGHTS | CC BY |
| SOURCE | Europe PMC |
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Platinum single-atom and cluster catalysis of the hydrogen evolution reaction By Niancai Cheng, Samantha Stambula, Da Wang, Mohammad Norouzi Banis, Jian Liu, Adam Riese, Biwei Xiao, Ruying Li, Tsun-Kong Sham, Li-Min Liu, Gianluigi A. Botton, Xueliang Sun Published in: Nature Communications DOI: 10.1038/ncomms13638 ABSTRACT Platinum-based catalysts have been considered the most effective electrocatalysts for the hydrogen evolution reaction in water splitting. However, platinum utilization in these electrocatalysts is extremely low, as the active sites are only located on the surface of the catalyst particles. Downsizing catalyst nanoparticles to single atoms is highly desirable to maximize their efficiency by utilizing nearly all platinum atoms. Here we report on a practical synthesis method to produce isolated single platinum atoms and clusters using the atomic layer deposition technique. The single platinum atom catalysts are investigated for the hydrogen evolution reaction, where they exhibit significantly enhanced catalytic activity (up to 37 times) and high stability in comparison with the state-of-the-art commercial platinum/carbon catalysts. The X-ray absorption fine structure and density functional theory analyses indicate that the partially unoccupied density of states of the platinum atoms' 5d orbitals on the nitrogen-doped graphene are responsible for the excellent performance. Securing renewable and reliable sources of clean energy is one of the world's foremost challenges. Addressing this challenge is not only critical for the global economy but will also aid in the mitigation of environmental and health hazards caused by fossil fuels1. Hydrogen is the cleanest fuel available and is believed to be one of the most promising energy sources of the twenty-first century23. However, the majority of the hydrogen produced today is derived from steam-reformed methane, which is sourced from fossil reserves and produces a substantial amount of CO2 (ref. 4). The production of hydrogen from water electrolysis is a promising alternative to the current CO2-emitting fossil fuel-based energy systems56. Platinum (Pt)-based catalysts are generally considered to be the most effective electrocatalysts for the hydrogen evolution reaction (HER)57. Unfortunately, Pt is expensive and scarce, limiting the commercial potential for such catalysts. The development of active, stable and inexpensive electrocatalysts for water splitting is a key step in the realization of a hydrogen economy, which is based on the use of molecular hydrogen for energy storage. Significant effort has been devoted to the search of non-precious-metal-based HER catalysts, including sulfide-based materials891011, and C3N4 (refs 12, 13, 14). Although these candidate materials show promising activities for the HER, the activities of these catalysts in their present form are insufficient for industrial applications15. To overcome the challenges associated with the Pt HER catalysts and to drive the cost of H2 production from water electrolysis down, it is very important to markedly decrease the Pt loading and increase the Pt utilization efficiency. Currently, supported Pt nanoparticles (NPs) are typically used to promote Pt activity towards the HER. Unfortunately, the geometry of the NPs limit the majority of the Pt atoms to the particle core, deeming them ineffective, as only surface atoms are involved in the electrochemical reaction16. Reducing the size of the Pt NPs to clusters or even single atoms could significantly decrease the noble metal usage and increase their catalytic activity, which is highly desirable to enhance the Pt utilization and decrease the cost of the electrocatalysts17. It has been shown that single Pt atoms dispersed on an FeOx surface have a higher catalytic activity for CO oxidation compared with the corresponding Pt NPs18. Moreover, the single-atom catalysts also exhibited a significantly improved catalytic activity towards methanol oxidation, up to 10 times greater than the state-of-the-art commercial carbon-supported Pt (Pt/C) catalysts19. Controlled and large-scale synthesis of stable single atoms and clusters remains a considerable challenge due to the natural tendency for metal atoms to diffuse and agglomerate, resulting in the formation of larger particles2021. In practical applications, it is required that the single atoms not only have a high activity but also exhibit a satisfactory stability172223. Moreover, it is also desired to produce a high density of single atoms to meet the practical applications. Consequently, an ideal single-atom catalyst must have a high activity, a high stability and a high density. Thus, we need to discover an effective means to synthesize this ideal single-atom catalyst. In this paper, the atomic layer deposition (ALD) technique was utilized, as it has been proven to be a powerful tool for large-scale synthesis of stable single-atom and cluster catalysts1924. ALD has the ability to precisely control the size and distribution of particles on a substrate by using sequential and self-limiting surface reactions252627. In this work, we fabricate single platinum atoms and clusters supported on nitrogen-doped graphene nanosheets (NGNs) for the HER using the ALD technique, resulting in the utilization of nearly all the Pt atoms. The size and density of the Pt catalysts on the NGNs are precisely controlled by simply adjusting the number of ALD cycles. The Pt atoms and clusters on the NGNs show much greater activity for the HER in comparison with conventional Pt NP catalysts. RESULTS Electron microscopy characterization The morphology of the ALD Pt on NGNs with 50 and 100 cycles (denoted hereafter as ALD50Pt/NGNs and ALD100Pt/NGNs, respectively) were characterized by annular dark field (ADF) imaging with aberration-corrected scanning transmission electron microscopy (STEM). The high spatial resolution allowed for the precise determination of the size and distribution of the individual metal atoms, thus providing local structural information about the metal species on the NGN supports242829. It can be clearly observed in Fig. 1a,b that the numerous individual Pt atoms (bright spots), as well as very small Pt clusters are uniformly dispersed on the NGNs' surface for the ALD50Pt/NGNs catalysts. Through examination of multiple NGNs, small NPs were also detected on this sample (Supplementary Fig. 1a). After 100 ALD cycles many single Pt atoms and small clusters were still present, yet it appears as though some Pt clusters have grown to form NPs at a larger quantity than observed for the 50 ALD cycles (Fig. 1c,d and Supplementary Fig. 1b). These findings suggest that ALD is a suitable technique for preparing single atoms/clusters on nitrogen-doped graphene supports. As shown in Fig. 1e, during the ALD process, the Pt precursor (MeCpPtMe3) first reacts with the NGNs as influenced by the N-dopant. The chemical bonding between the Pt precursor and NGNs ensures a strong interaction between the deposited material and the support30. The Pt loading after ALD was confirmed using inductively coupled plasma-atomic emission spectroscopy, in which a loading of 2.1 and 7.6 wt% was obtained for the 50 and 100 ALD cycled samples, respectively. Catalytic performance and stability The HER activity of the ALDPt/NGNs with 50 and 100 cycles were measured in comparison with commercial Pt/C catalysts by conducting linear sweep voltammetry measurements in 0.5 M H2SO4 at room temperature. The NGNs without Pt catalysts exhibited a poor HER activity (Fig. 2a), which is consistent with previous studies12. As shown in Fig. 2a, both ALDPt/NGN and Pt/C catalysts exhibited excellent catalytic activities towards the HER, with negligible overpotentials. Importantly, the ALDPt/NGN catalysts exhibited much higher HER activities than that of the commercial Pt/C catalysts (Fig. 2a). It was observed that the HER catalytic activity of the ALDPt/NGNs decreased with an increased number of ALD cycles. This is likely attributed to