Nickel-vanadium monolayer double hydroxide for efficient electrochemical water oxidation.
Fan K, Chen H, Ji Y, Huang H, Claesson PM, Daniel Q, Philippe B, Rensmo H, Li F, Luo Y, Sun L. · 2016
Read Nickel-vanadium monolayer double hydroxide for efficient electrochemical water oxidation. by Fan K, Chen H, Ji Y, Huang H, Claesson PM, Daniel Q, Philippe B, Rensmo H, Li F, Luo Y, Sun L. (2016) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/europmc-pmc4912661.txt.
Introduction
Ke Fan and co-authors built a nickel-vanadium layered catalyst in Nature Communications in 2016 that splits water with high efficiency. Water oxidation is the slow half of making fuel from water, and cheap, strong catalysts are in demand. Their material is a single-layer double hydroxide, one sheet thick, pairing nickel with vanadium.
The sheet reached a current density of 27 milliamps per square centimeter at an overpotential of 350 millivolts, matching the best nickel-iron layered catalysts in alkaline baths. Mechanism studies credit the thin build and the vanadium partner for high inborn activity. Earth-common metals in a single layer can thus rival top catalysts, a hopeful cost path for solar fuels.
Catalog record
| CREATOR | Fan K, Chen H, Ji Y, Huang H, Claesson PM, Daniel Q, Philippe B, Rensmo H, Li F, Luo Y, Sun L. |
|---|---|
| YEAR | 2016 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 46 KB |
| LICENSE | CC BY 4.0 |
| RIGHTS | CC BY |
| SOURCE | Europe PMC |
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Nickel–vanadium monolayer double hydroxide for efficient electrochemical water oxidation By Ke Fan, Hong Chen, Yongfei Ji, Hui Huang, Per Martin Claesson, Quentin Daniel, Bertrand Philippe, Håkan Rensmo, Fusheng Li, Yi Luo, Licheng Sun Published in: Nature Communications DOI: 10.1038/ncomms11981 ABSTRACT Abstract Highly active and low-cost electrocatalysts for water oxidation are required due to the demands on sustainable solar fuels; however, developing highly efficient catalysts to meet industrial requirements remains a challenge. Herein, we report a monolayer of nickel–vanadium-layered double hydroxide that shows a current density of 27 mA cm−2 (57 mA cm−2 after ohmic-drop correction) at an overpotential of 350 mV for water oxidation. Such performance is comparable to those of the best-performing nickel–iron-layered double hydroxides for water oxidation in alkaline media. Mechanistic studies indicate that the nickel–vanadium-layered double hydroxides can provide high intrinsic catalytic activity, mainly due to enhanced conductivity, facile electron transfer and abundant active sites. This work may expand the scope of cost-effective electrocatalysts for water splitting. Water splitting is considered one of the most promising strategies to produce chemical fuels such as hydrogen. The half reaction of the water splitting process, water oxidation, remains the bottleneck of the whole process at present. Therefore, developing highly efficient water oxidation catalysts is crucial. Some precious metal-based electrocatalysts, such as IrO2 and RuO2, have shown excellent performance for water oxidation; however, they suffer from high-cost and relative scarcity of precious metals, which limits their applications. Although some first-row transition metal oxides (for example, NiOx, NiFeOx, CoOx and MnOx) had been developed as low-cost electrocatalysts for water oxidation, most of them still cannot compete with IrO2 and RuO21,2. Recently, the earth-abundant Ni–Fe double-layered hydroxide (NiFe-LDH) catalysts have attracted attention3,4,5,6,7. From being first reported as an advanced electrocatalyst coupled with carbon nanotubes for water oxidation8, it is nowadays known as one of the most active catalysts with a low overpotential and high electrolysis current. Since, then tremendous efforts have been devoted to further improve the activity of NiFe-LDH, such as exfoliation9 and hybridization6,8,10,11, to the extent that LDH catalysts can now outperform IrO2 in alkaline media6,8,9; however, the aforementioned methods are still too complicated for large-scale applications. It is already known that Fe(III) incorporated in Ni(II)-based LDH is the key aspect for the high catalytic performance, although the role of Fe in LDH is still ambiguous5,6,12. Besides Fe(III), cobalt is also commonly incorporated in nickel hydroxides to construct NiCo-LDHs for water oxidation13,14,15,16, and the resulting NiCo-LDHs show promising catalytic activities; however, the performance is relatively low compared with the reported NiFe-LDHs under identical conditions9. Besides, more earth-abundant metal elements have been incorporated into Ni(OH)2 to explore novel LDHs for water oxidation, for example, recently Koper and co-workers17 investigated a series of Ni-based double hydroxides with Cr, Mn, Fe, Co, Cu and Zn for water oxidation, and among these candidates NiFe-LDH still appears as the most promising and shows the best activity. Up until now, there has been no reported earth-abundant metal element that can outperform Fe incorporated Ni-based LDHs. Searching for an earth-abundant metal to form efficient Ni-based LDH comparable to NiFe-LDH is still the state-of-the-art in this area of energy research. In this work, we incorporate another earth-abundant element into Ni(OH)2: vanadium, and succeed in forming NiV-LDH as an efficient catalyst for the water oxidation reaction. A simple one-step hydrothermal method is employed to synthesize NiV-LDH. Without need for exfoliation or hybridization with other materials, the resulting monolayer NiV-LDH catalyst exhibits comparable activity to the best-performing NiFe-LDH for water oxidation in alkaline electrolyte. RESULTS Monolayer of Ni0.75V0.25-LDH Figure 1a shows the typical X-ray diffraction patterns of pure Ni(OH)2 and Ni0.75V0.25-LDH. As can be seen, pure Ni(OH)2 was successfully synthesized in the simple hydrothermal system without addition of V sources, and the X-ray diffraction pattern supports the formation of pure hexagonal α-Ni(OH)2 (JCPDS 380715), which exhibits a layered structure constructed from [NiO6] coordinated octahedra connected by sharing their edges. After incorporation of V into the structure of α-Ni(OH)2, no obvious change can be observed in the X-ray diffraction spectrum, indicating Ni0.75V0.25-LDH is the isomorphous compound as α-Ni(OH)2 with the layered structure. The X-ray diffraction pattern of prepared bare V-based hydroxide without Ni source (Supplementary Fig. 1) shows very low crystallinity that is significantly different from those of the above Ni-based materials. Figure 1b–d shows the Ni 2p, V 2p and O 1s X-ray photoelectron spectroscopy (XPS) core-level spectra of the Ni0.75V0.25-LDH powder. The Ni 2p spectrum presents two main structures, resulting from the spin–orbit splitting of the p orbital that are assigned as Ni 2p3/2 (850−870 eV region) and Ni 2p1/2 (870−890 eV region). The binding energy difference between the 3/2 and 1/2 components is ∼17.4 eV. Ni 2p3/2 presents a main peak at ∼855.4 eV with an intense satellite structure at ∼861.2 eV, (∼872.8 and ∼879.6 eV, respectively, for Ni2p1/2), this signature is characteristic of Ni2+ (refs 18, 19, 20, 21). The spectra of O 1s and V 2p are presented in Fig. 1c, the O 1s signal originates from Ni0.75V0.25-LDH, but its main contributions is from the fluorine doped tin oxide (FTO) glass substrate used with an O1s-binding energy ∼530 eV. The V 2p core-level spectrum is also decomposed into V 2p3/2 and V 2p1/2 due to the spin–orbit splitting that are separated by ∼7.5 eV. A closer view on the V 2p3/2 region is shown in Fig. 1d. Three components can be distinguished at ∼515.4 eV (in blue), ∼516.3 eV (in light grey) and ∼517.5 eV (in grey) and are in good agreement with respectively V3+, V4+ and V5+ (refs 22, 23, 24). This result indicates that V3+ was partially oxidized by oxygen to V4+ and V5+ during the synthesis. [Figure: X-ray diffraction and XPS.(a) X-ray diffraction patterns of α-Ni(OH)2 and Ni0.75V0.25-LDH. XPS measurements (hν=1,486.6 eV) on the Ni0.75V0.25-LDH powder deposited on a FTO conductive glass: (b) Ni 2p (c) O 1s and V 2p core-level spectra, and (d) zoom on the V 2p core-level spectrum.] Typical transmission electron microscopy (TEM) images of α-Ni(OH)2 and Ni0.75V0.25-LDH are shown in Fig. 2. Interestingly, as shown in Fig. 2a,b, the pure α-Ni(OH)2 shows a narrow nanosheet morphology with the size of few tens of nanometre. Aggregated by these nanosheet crystals, a porous sphere structure with the diameter of few micrometres was obtained, as observed by scanning electron microscopy (SEM; Supplementary Fig. 2a). After adding the vanadium source to the initial solution for hydrothermal reaction, Ni0.75V0.25-LDH presents a three-dimensional morphology assembled by ultrathin nanosheets as shown in Fig. 2c,d. Selected area electron diffraction pattern in the inset of Fig. 2d confirms the hexagonal phase of Ni0.75V0.25-LDH. The atomic force microscopy (AFM) and height profile of Ni0.75V0.25-LDH in Fig. 2e,f show that the nanosheet is ultrathin with thickness of ∼0.9 nm, indicating the obtained nanosheet is monolayered. To make a comparison, Ni0.75Fe0.25-LDH was also prepared by a similar protocol in the literature25 and the SEM image of the products obtained is shown in Supplementary Fig. 2b and c. Some large aggregation plates in Ni0.75Fe0.25-LDH can be observed, showing that the size of aggregations by nanosheets in Ni0.75Fe0.25-LDH is bigger than Ni0.75V0.25-LDH. However, the TEM, AFM images and height profile of Ni0.75Fe0.25-LDH in Supplementary Fig. 2d–f exhibit that the nanosheet of Ni0.75Fe0.25-LDH is