Sensitivity and correlation of hypervariable regions in 16S rRNA genes in phylogenetic analysis.

Yang B, Wang Y, Qian PY. · 2016

Read Sensitivity and correlation of hypervariable regions in 16S rRNA genes in phylogenetic analysis. by Yang B, Wang Y, Qian PY. (2016) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/europmc-pmc4802574.txt.

Introduction

Bo Yang, Yong Wang, and Pei-Yuan Qian test which slice of a marker gene best stands in for the whole, in BMC Bioinformatics in 2016. Microbiologists sort bacteria by the 16S gene, but sequencers read only a slice at a time, so studies pick one of its seven changeable regions. Picks vary, and a poor pick warps the family tree a study draws.

The team built a testing pipeline that scores each region by how closely its tree matches the full-gene tree, measured as the walking distance between tree shapes. Regions V4 through V6 matched best across most bacterial groups. Regions V2 and V8 matched worst. The authors recommend the middle regions for universal primers and close with a thought on how the gene's job may have shaped its uneven change.

Catalog record

CREATORYang B, Wang Y, Qian PY.
YEAR2016
COLLECTIONPAPERS
FORMATTXT
FILE SIZE31 KB
LICENSECC BY 4.0
RIGHTSCC BY
SOURCEEurope PMC

Source: https://europepmc.org/articles/PMC4802574

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Sensitivity and correlation of hypervariable regions in 16S rRNA genes in phylogenetic analysis By Bo Yang, Yong Wang, Pei-Yuan Qian Published in: BMC Bioinformatics DOI: 10.1186/s12859-016-0992-y ABSTRACT Abstract Background Prokaryotic 16S ribosomal RNA (rRNA) sequences are widely used in environmental microbiology and molecular evolution as reliable markers for the taxonomic classification and phylogenetic analysis of microbes. Restricted by current sequencing techniques, the massive sequencing of 16S rRNA gene amplicons encompassing the full length of genes is not yet feasible. Thus, the selection of the most efficient hypervariable regions for phylogenetic analysis and taxonomic classification is still debated. In the present study, several bioinformatics tools were integrated to build an in silico pipeline to evaluate the phylogenetic sensitivity of the hypervariable regions compared with the corresponding full-length sequences. Results The correlation of seven sub-regions was inferred from the geodesic distance, a parameter that is applied to quantitatively compare the topology of different phylogenetic trees constructed using the sequences from different sub-regions. The relationship between different sub-regions based on the geodesic distance indicated that V4-V6 were the most reliable regions for representing the full-length 16S rRNA sequences in the phylogenetic analysis of most bacterial phyla, while V2 and V8 were the least reliable regions. Conclusions Our results suggest that V4-V6 might be optimal sub-regions for the design of universal primers with superior phylogenetic resolution for bacterial phyla. A potential relationship between function and the evolution of 16S rRNA is also discussed. Electronic supplementary material The online version of this article (doi:10.1186/s12859-016-0992-y) contains supplementary material, which is available to authorized users. Keywords: 16S rRNA, 16S rRNA gene, Variable regions, Phylogenetic, Geodesic distance, Primer BACKGROUND As the major players in almost all environments explored, bacteria contribute immensely to global energy conversion and the recycling of matter. Thus, profiling of the microbial community is one of the most important tasks for microbiologists to explore various ecosystems. However, our understanding of the kingdom Bacteria remains limited because most bacteria cannot be cultured or isolated under laboratory conditions [1]. In the past few decades, DGGE (Denaturing gradient gel electrophoresis) [2], T-RFLP (Terminal restriction fragment length polymorphism) [3], FISH (fluorescent in situ hybridization) [4] and Genechips [5] were used as mainstream methods in studies of bacterial communities and diversity until the development of high-throughput sequencing technology. Recently, meta-genomic methods provided by next-generation sequencing technology such as Roche 454 [6, 7] and Illumina [8] have facilitated a remarkable expansion of our knowledge regarding uncultured bacteria [7]. The 16S rRNA gene sequence was first used in 1985 for phylogenetic analysis [9]. Because it contains both highly conserved regions for primer design and hypervariable regions to identify phylogenetic characteristics of microorganisms, the 16S rRNA gene sequence became the most widely used marker gene for profiling bacterial communities [10]. Full-length 16S rRNA gene sequences consist of nine hypervariable regions that are separated by nine highly conserved regions [11, 12]. Limited by sequencing technology, the 16S rRNA gene sequences used in most studies are partial sequences. Therefore, the selection of proper primers is critical to study bacterial phylogeny in various environments. An early study has shown that the use of different primers might result in different DGGE patterns [13]. Recent studies utilizing high throughput technology have also demonstrated that the use of suboptimal primer pairs results in the uneven amplification of certain species, causing either an under- or over-estimation of some species in a microbial community [10–12, 14]. Although several studies have focused on optimal primer pairs or, equivalently, optimal variable regions for the study of bacterial communities [15–17], they utilized synthetic microbial communities and the taxa that were chosen to conduct those experiments would largely influence the final results. Consequently, the use of different sequencing technologies and targeting of different sub-regions of 16S rRNA genes will result in a distinct composition of a given microbial community. However, till now there was few study focusing on comparing the phylogenetic sensitivity of the 16S rRNA sub-regions. Phylogenetic trees are widely used to elucidate systematic relationships between different species, in particular the novel microbial lineages [9, 18–20]. However, strategies to determine relationships between different 16S rRNA sub-regions in terms of phylogenetic resolution remain questionable. The correlation of the different hypervariable regions may be inferred from the geodesic distance of phylogenetic trees that are constructed based on the sequences of different regions. The topological similarity between phylogenetic trees may be estimated by a geodesic algorithm that can project the node structure of a tree into a multi-dimensional model [21]. The geodesic distance has been used to quantify discrepancies between trees [22, 23]. A recent study took advantage of this method to quantitatively compare phylogenetic trees that were reconstructed using different essential genes [1]. Other than 16S r RNA genes, concatenated essential marker genes are preferred for phylogenetic analyses [24]. However, as suggested by the pairwise geodesic distance, the topology of the tree based on the amino acids of translation initiation factor 2 (IF2) is highly similar to that obtained with the concatenated marker sequences [1], suggesting that IF2 can be applied alone for phylogenetic reconstruction and roughly reflects genetic relationships using all of the other essential genes. Using the geodesic algorithm, it is possible to quantify the sensitivity of 16S rRNA variable regions compared with the full-length 16S rRNA sequences. These quantitative data also permit the exploration of correlative relationships between different sub-regions of 16S rRNA in terms of the phylogenetic resolution. In the present study, we designed an in silico pipeline to evaluate the phylogenetic resolution of different variable regions in 16S rRNA genes. METHODS Data source and pre-treatment The pre-aligned and truncated SILVA Ref 115 16S rRNA NR99 dataset was downloaded from SILVA online database as a primary dataset [25]. The original downloaded dataset from SILVA contains 479,726 nearly full-length 16S/18S sequences of Archaea, Bacteria and Eukaryota. The pre-processed dataset contained 79,096 sequences from the kingdom Bacteria. The following filtration criteria were applied to the primary dataset: 1) longer than 1400 bp; and 2) SILVA annotated taxa. The full-length bacterial 16S rRNA dataset was then processed as described in Fig. 1. SILVA database sorted organelles sequences into Bacterial kingdom, so the organelles sequences were manually processed. [Figure: Workflow of the data processing. As described in Materials and methods, the sequences downloaded from the SILVA database were filtered, randomly selected and grouped. Phylogenetic trees were then built, and geodesic distances were calculated] Definition of sub-regions Referring to the previous studies [11, 12], 10 markers located in conserved regions of the 16S rRNA genes were selected to divide the full-length aligned 16S rRNA sequences into nine sub-regions (Additional file 1: Table S1). Each region starts with a conserved sequence, and the remainder is a downstream variable sequence. The tenth conserved region was the termination marker and was removed from the ninth sub-region. The breakpoints of each region in the aligned data are shown in Table 1. The sub-regions were sequentially marked from V1 to V9. The filtered dataset was divided into 10 files: nine for the V1-V9 sub-regions, and one for the combination of all of the sub-regions (VT). After division of the sub-regions, most of the V1 and V9 sub-regions were found to be incomplete. As a result, V1 and V9 were not included in

Read the complete text