The sequence of sequencers: The history of sequencing DNA.

Heather JM, Chain B. · 2016

Read The sequence of sequencers: The history of sequencing DNA. by Heather JM, Chain B. (2016) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/europmc-pmc4727787.txt.

Introduction

James M. Heather and Benjamin Chain wrote a history of DNA sequencing in Genomics in 2016. Reading the order of DNA letters underpins modern biology, but the craft took fifty years to mature. The review walks through each generation of technology, from the first short RNA sequences through Sanger's method to the high-throughput machines that read millions of fragments at once. Key discoveries, landmark sequences, and the researchers behind them are woven through the account.

The scale shift is the story's spine: from struggling to decode one gene to routine whole genomes in days. Each generation's chemistry and limits are explained plainly enough for newcomers, with enough detail to satisfy specialists. The authors close by noting how widely sequencing now reaches, from medicine to ecology. As a single narrative of a field that reinvented itself repeatedly, the piece serves students and veterans alike.

Catalog record

CREATORHeather JM, Chain B.
YEAR2016
COLLECTIONPAPERS
FORMATTXT
FILE SIZE54 KB
LICENSECC BY 4.0
RIGHTSCC BY
SOURCEEurope PMC

Source: https://europepmc.org/articles/PMC4727787

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

The sequence of sequencers: The history of sequencing DNA By James M Heather, Benjamin Chain Published in: Genomics DOI: 10.1016/j.ygeno.2015.11.003 ABSTRACT Abstract Determining the order of nucleic acid residues in biological samples is an integral component of a wide variety of research applications. Over the last fifty years large numbers of researchers have applied themselves to the production of techniques and technologies to facilitate this feat, sequencing DNA and RNA molecules. This time-scale has witnessed tremendous changes, moving from sequencing short oligonucleotides to millions of bases, from struggling towards the deduction of the coding sequence of a single gene to rapid and widely available whole genome sequencing. This article traverses those years, iterating through the different generations of sequencing technology, highlighting some of the key discoveries, researchers, and sequences along the way. Keywords: DNA, RNA, Sequencing, Sequencer, History INTRODUCTION "“... [A] knowledge of sequences could contribute much to our understanding of living matter.”Frederick Sanger [1]" The order of nucleic acids in polynucleotide chains ultimately contains the information for the hereditary and biochemical properties of terrestrial life. Therefore the ability to measure or infer such sequences is imperative to biological research. This review deals with how researchers throughout the years have addressed the problem of how to sequence DNA, and the characteristics that define each generation of methodologies for doing so. FIRST-GENERATION DNA SEQUENCING Watson and Crick famously solved the three-dimensional structure of DNA in 1953, working from crystallographic data produced by Rosalind Franklin and Maurice Wilkins [2], [3], which contributed to a conceptual framework for both DNA replication and encoding proteins in nucleic acids. However, the ability to ‘read’ or sequence DNA did not follow for some time. Strategies developed to infer the sequence of protein chains did not seem to readily apply to nucleic acid investigations: DNA molecules were much longer and made of fewer units that were more similar to one another, making it harder to distinguish between them [4]. New tactics needed to be developed. Initial efforts focused on sequencing the most readily available populations of relatively pure RNA species, such as microbial ribosomal or transfer RNA, or the genomes of single-stranded RNA bacteriophages. Not only could these be readily bulk-produced in culture, but they are also not complicated by a complementary strand, and are often considerably shorter than eukaryotic DNA molecules. Furthermore, RNase enzymes able to cut RNA chains at specific sites were already known and available. Despite these advantages, progress remained slow, as the techniques available to researchers – borrowed from analytical chemistry – were only able to measure nucleotide composition, and not order [5]. However, by combining these techniques with selective ribonuclease treatments to produce fully and partially degraded RNA fragments [6] (and incorporating the observation that RNA contained a different nucleotide base [7]), in 1965 Robert Holley and colleagues were able to produce the first whole nucleic acid sequence, that of alanine tRNA from Saccharomyces cerevisiae [8]. In parallel, Fred Sanger and colleagues developed a related technique based on the detection of radiolabelled partial-digestion fragments after two-dimensional fractionation [9], which allowed researchers to steadily add to the growing pool of ribosomal and transfer RNA sequences [10], [11], [12], [13], [14]. It was also by using this 2-D fractionation method that Walter Fiers' laboratory was able to produce the first complete protein-coding gene sequence in 1972, that of the coat protein of bacteriophage MS2 [15], followed four years later by its complete genome [16]. It was around this time that various researchers began to adapt their methods in order to sequence DNA, aided by the recent purification of bacteriophages with DNA genomes, providing an ideal source for testing new protocols. Making use of the observation that Enterobacteria phage λ possessed 5′ overhanging ‘cohesive’ ends, Ray Wu and Dale Kaiser used DNA polymerase to fill the ends in with radioactive nucleotides, supplying each nucleotide one at a time and measuring incorporation to deduce sequence [17], [18]. It was not long before this principle was generalized through the use of specific oligonucleotides to prime the DNA polymerase. Incorporation of radioactive nucleotides could then be used to infer the order of nucleotides anywhere, not just at the end termini of bacteriophage genomes [19], [20], [21]. However the actual determination of bases was still restricted to short stretches of DNA, and still typically involved a considerable amount of analytical chemistry and fractionation procedures. The next practical change to make a large impact was the replacement of 2-D fractionation (which often consisted of both electrophoresis and chromatography) with a single separation by polynucleotide length via electrophoresis through polyacrylamide gels, which provided much greater resolving power. This technique was used in two influential yet complex protocols from the mid-1970s: Alan Coulson and Sanger's ‘plus and minus’ system in 1975 and Allan Maxam and Walter Gilbert's chemical cleavage technique [22], [23]. The plus and minus technique used DNA polymerase to synthesize from a primer, incorporating radiolabelled nucleotides, before performing two second polymerisation reactions: a ‘plus’ reaction, in which only a single type of nucleotide is present, thus all extensions will end with that base, and a ‘minus’ reaction, in which three are used, which produces sequences up to the position before the next missing nucleotide. By running the products on a polyacrylamide gel and comparing between the eight lanes, one is able to infer the position of nucleotides at each position in the covered sequence (except for those which lie within a homopolymer, i.e. a run of the same nucleotide). It was using this technique that Sanger and colleagues sequenced the first DNA genome, that of bacteriophage ϕX174 (or ‘PhiX’, which enjoys a position in many sequencing labs today as a positive control genome) [24]. While still using polyacrylamide gels to resolve DNA fragments, the Maxam and Gilbert technique differed significantly in its approach. Instead of relying on DNA polymerase to generate fragments, radiolabelled DNA is treated with chemicals which break the chain at specific bases; after running on a polyacrylamide gel the length of cleaved fragments (and thus position of specific nucleotides) can be determined and therefore sequence inferred (see Fig. 1, right). This was the first technique to be widely adopted, and thus might be considered the real birth of ‘first-generation’ DNA sequencing. [Figure: First-generation DNA sequencing technologies. Example DNA to be sequenced (a) is illustrated undergoing either Sanger (b) or Maxam–Gilbert (c) sequencing. (b): Sanger's ‘chain-termination’ sequencing. Radio- or fluorescently-labelled ddNTP nucleotides of a given type - which once incorporated, prevent further extension - are included in DNA polymerisation reactions at low concentrations (primed off a 5′ sequence, not shown). Therefore in each of the four reactions, sequence fragments are generated with 3′ truncations as a ddNTP is randomly incorporated at a particular instance of that base (underlined 3′ terminal characters). (c): Maxam and Gilbert's ‘chemical sequencing’ method. DNA must first be labelled, typically by inclusion of radioactive P 32 in its 5′ phosphate moiety (shown here by Ⓟ). Different chemical treatments are then used to selectively remove the base from a small proportion of DNA sites. Hydrazine removes bases from pyrimidines (cytosine and thymine), while hydrazine in the presence of high salt concentrations can only remove those from cytosine. Acid can then be used to remove the

Read the complete text