Liquid exfoliation of solvent-stabilized few-layer black phosphorus for applications beyond electronics.

Hanlon D, Backes C, Doherty E, Cucinotta CS, Berner NC, Boland C, Lee K, Harvey A, Lynch P, Gholamvand Z, Zhang S, Wang K, Moynihan G, Pokle A, Ramasse QM, McEvoy N, Blau WJ, Wang J, Abellan G, Hauke F, Hirsch A, Sanvito S, Sanvito S, O'Regan DD, Duesberg GS, Nicolosi V, Coleman JN. · 2015

Read Liquid exfoliation of solvent-stabilized few-layer black phosphorus for applications beyond electronics. by Hanlon D, Backes C, Doherty E, Cucinotta CS, Berner NC, Boland C, Lee K, Harvey A, Lynch P, Gholamvand Z, Zhang S, Wang K, Moynihan G, Pokle A, Ramasse QM, McEvoy N, Blau WJ, Wang J, Abellan G, Hauke F, Hirsch A, Sanvito S, Sanvito S, O'Regan DD, Duesberg GS, Nicolosi V, Coleman JN. (2015) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/europmc-pmc4634220.txt.

Introduction

In 2015, Damien Hanlon and colleagues' study making thin sheets of black phosphorus by peeling the crystal apart in liquid appeared. Few-layer black phosphorus is a promising two-dimensional material, but it degrades quickly in air and water. The team used a solvent called CHP to exfoliate it under normal room conditions. The work appeared in Nature Communications.

The solvent forms a protective shell around the sheets, so they survived far longer than expected. Computer simulations showed reactions start only at sheet edges. The sheets could be made in quantity with controlled size and visible light emission. Trials pointed to uses in fast optical switches, gas sensors, and strengthening fillers for composites, well beyond the electronics uses first imagined for the material.

Catalog record

CREATORHanlon D, Backes C, Doherty E, Cucinotta CS, Berner NC, Boland C, Lee K, Harvey A, Lynch P, Gholamvand Z, Zhang S, Wang K, Moynihan G, Pokle A, Ramasse QM, McEvoy N, Blau WJ, Wang J, Abellan G, Hauke F, Hirsch A, Sanvito S, Sanvito S, O'Regan DD, Duesberg GS, Nicolosi V, Coleman JN.
YEAR2015
COLLECTIONPAPERS
FORMATTXT
FILE SIZE66 KB
LICENSECC BY 4.0
RIGHTSCC BY
SOURCEEurope PMC

Source: https://europepmc.org/articles/PMC4634220

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Liquid exfoliation of solvent-stabilized few-layer black phosphorus for applications beyond electronics By Damien Hanlon, Claudia Backes, Evie Doherty, Clotilde S Cucinotta, Nina C Berner, Conor Boland, Kangho Lee, Andrew Harvey, Peter Lynch, Zahra Gholamvand, Saifeng Zhang, Kangpeng Wang Published in: Nature Communications DOI: 10.1038/ncomms9563 ABSTRACT Abstract Few-layer black phosphorus (BP) is a new two-dimensional material which is of great interest for applications, mainly in electronics. However, its lack of environmental stability severely limits its synthesis and processing. Here we demonstrate that high-quality, few-layer BP nanosheets, with controllable size and observable photoluminescence, can be produced in large quantities by liquid phase exfoliation under ambient conditions in solvents such as N-cyclohexyl-2-pyrrolidone (CHP). Nanosheets are surprisingly stable in CHP, probably due to the solvation shell protecting the nanosheets from reacting with water or oxygen. Experiments, supported by simulations, show reactions to occur only at the nanosheet edge, with the rate and extent of the reaction dependent on the water/oxygen content. We demonstrate that liquid-exfoliated BP nanosheets are potentially useful in a range of applications from ultrafast saturable absorbers to gas sensors to fillers for composite reinforcement. Over the last few years, the study of two-dimensional (2D) materials1,2,3,4,5,6 such as graphene, BN and MoS2 have become one of the most exciting areas of nano-science. However, in the past year a new 2D material has been generating considerable excitement in the research community7. Phosphorene consists of atomically thin, 2D nanosheets of black phosphorus (BP). In BP, the monolayers stack together via van der Waals interactions to form layered crystals in much the same way as graphene stacks together to form graphite. Recently, it was shown that BP can be exfoliated by mechanical cleavage to form mono- and few-layer phosphorene, which we refer to as FL-BP8,9,10,11,12. This new material has a direct bandgap in mono-, few-layer and bulk forms, which varies with nanosheet thickness from ∼1.5 eV for monolayer phosphorene to ∼0.3 eV for bulk BP8,13,14. This is in contrast to graphene1 which has no bandgap and materials such as MoS2, which display direct bandgaps only in the monolayer form6. As a result, BP is extremely attractive both for electronics and optoelectronics and has therefore been extensively studied in applications such as transistors7,12,15, photodetectors15,16 and solar cells9. In addition, like other 2D materials, it is probable that BP has the potential to perform in a range of applications beyond (opto)electronics. Indeed, BP has already been fabricated into electrodes in lithium ion batteries17. Furthermore, theory predicts that FL-BP shows potential for use in gas sensors18 and thermoelectrics19. For most applications, it will be necessary to produce FL-BP in much larger quantities than can be achieved by mechanical exfoliation. One way to prepare nanosheets in large quantities is by liquid phase exfoliation (LPE)20,21. This technique involves the sonication22,23 or shearing24,25 of layered crystals in appropriate liquids and has previously been applied to graphene and boron nitride, as well as a range of other 2D materials21,22,23,26,27,28. While phosphorene nanosheets have very recently been produced by liquid exfoliation29,30,31, this method remains problematic, largely because BP is known to be unstable7,8,32, degrading via reactions with water and oxygen. For this method to be useful, ways must be found to stabilize liquid-exfoliated FL-BP nanosheets against oxidation. It is known that BP can be protected from reacting with environmental species by encapsulation, suggesting a possible way forward7,24. We hypothesized that LPE of BP may be practical if the solvent is carefully chosen to minimize oxidation of the exfoliated nanosheets in the liquid phase due to the solvation shell acting as a barrier to prevent oxidative species reaching the nanosheet surface. If this could be achieved it would yield numerous advantages. LPE is a powerful technique to produce nanosheets in large quantities. In addition, the nanosheets are produced directly in the liquid phase and are thus inherently processable and can be easily formed into composites, coatings or films21, facilitating their use in a range of applications. Furthermore, size-control can be achieved by centrifugation, enabling processing for both applications and fundamental studies. For example, studying the oxidation of BP nanosheets of varying sizes would give insight into whether the degradation mechanism is associated with nanosheet edges or the basal plane. However, most importantly, protection of the nanosheets by an appropriate solvent would allow large-scale production in ambient conditions, dramatically simplifying future development of this material. In this work, we demonstrate that BP can be exfoliated to give large quantities of FL-BP nanosheets by sonication in solvents such as N-cyclohexyl-2-pyrrolidone (CHP), even in ambient conditions. We show that these nanosheets can be readily size-selected by controlled centrifugation. Such dispersions show direct gap photoluminescence (PL) with PL energy, width and relative quantum yield scaling strongly with layer number. The BP nanosheets are relatively stable in CHP, but degrade rapidly once water/O2 is added. The reaction occurs predominantly at nanosheet edges, presumably following a different reaction pathway than previously observed32. Finally we demonstrate that liquid-exfoliated BP nanosheets can be used in applications beyond electronics. We show that dispersions of FL-BP have impressive nonlinear optical properties allowing them to be used in optical switching applications. In addition, the nanosheets can be incorporated into polymer matrices resulting in reinforced composites and are highly potent gas sensors. RESULTS Exfoliation and basic characterization To produce large quantities of BP nanosheets (see Fig. 1a for structure), we use LPE22,23. This technique is often carried out in amide solvents such as CHP or N-methyl-2-pyrrolidone (NMP), although isopropanol (IPA) has proven useful in some cases22. Sonication of ground BP crystals (see Fig. 1b for scanning electron microscopic (SEM) image) in CHP yields a brown dispersion (Fig. 1c). In the simplest case, we remove unexfoliated material by centrifugation at 1,000 r.p.m. (106 g) for 180 min to yield a stable dispersion which we refer to as the standard sample (std-BP, see Supplementary Fig. 1 for process optimization). [Figure: Basic characterization of exfoliated black phosphorous.(a) Structure of black phosphorus (BP). (b) SEM image of a layered BP crystal (scale bar, 100 μm). (c) Photograph of a dispersion of exfoliated FL-BP in CHP. (d–f) Representative low-resolution transmission electron microscopy (TEM) images of FL-BP exfoliated in N-cyclohexyl-2-pyrrolidone (CHP) (scale bars in d–f: 500, 100 and 500 nm). (g) Bright-field scanning transmission TEM (STEM) image and (h) Butterworth-filtered high-angle annular dark field (HAADF) STEM image of FL-BP (exfoliated in isopropanol) showing the intact lattice (scale bars in g and h, 2 and 1 nm). (i) Nanosheet length histogram of the exfoliated FL-BP obtained from TEM (sample size=239). (j) Extinction, absorbance, scattering coefficient spectra of FL-BP in CHP. (k) Concentration of FL-BP as a function of sonication time. The dashed line shows power law behaviour with exponent 0.4. (l) Raman spectrum (mean of 100 spectra, excitation 633 nm) of a filtered dispersion. Inset: scanning electron microscopic image of thin film (scale bar, 2 μm). (m) X-ray photoelectron spectroscopy P core-level region.] The successful exfoliation of BP in CHP was confirmed by transmission electron microscopy (TEM) of nanosheets on holey carbon grids (TEM, Fig. 1d–f and Supplementary Fig. 2). These images show electron-transparent nanosheets with lateral dimensions L∼1 μm. As shown by scanning TEM (STEM) and high-angle annular dark field (HAADF) STEM imaging, the lattice appears intact over wide regions (Fig. 1g,h).

Read the complete text