Purely organic electroluminescent material realizing 100% conversion from electricity to light.

Kaji H, Suzuki H, Fukushima T, Shizu K, Suzuki K, Kubo S, Komino T, Oiwa H, Suzuki F, Wakamiya A, Murata Y, Adachi C. · 2015

Read Purely organic electroluminescent material realizing 100% conversion from electricity to light. by Kaji H, Suzuki H, Fukushima T, Shizu K, Suzuki K, Kubo S, Komino T, Oiwa H, Suzuki F, Wakamiya A, Murata Y, Adachi C. (2015) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/europmc-pmc4634127.txt.

Introduction

Hiroyuki Kaji and colleagues' 2015 study centres on a purely organic light-emitting material that converts electricity to light with near total efficiency. Top organic light-emitting diodes, or OLEDs, usually rely on rare metals such as iridium. Their new emitter uses only common elements. The work appeared in Nature Communications.

The material pairs an electron-giving part with an electron-taking part, tuned so that stored triplet energy flips back into light-giving singlet form. It reached almost one hundred percent light yield and an external efficiency of 29.6 percent, rising to 41.5 percent with an out-coupling sheet. Efficiency stayed high even at bright display levels. Metal-free emitters this good could cut the cost and supply risk of future screens and lighting.

Catalog record

CREATORKaji H, Suzuki H, Fukushima T, Shizu K, Suzuki K, Kubo S, Komino T, Oiwa H, Suzuki F, Wakamiya A, Murata Y, Adachi C.
YEAR2015
COLLECTIONPAPERS
FORMATTXT
FILE SIZE34 KB
LICENSECC BY 4.0
RIGHTSCC BY
SOURCEEurope PMC

Source: https://europepmc.org/articles/PMC4634127

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Purely organic electroluminescent material realizing 100% conversion from electricity to light By Hironori Kaji, Hajime Suzuki, Tatsuya Fukushima, Katsuyuki Shizu, Katsuaki Suzuki, Shosei Kubo, Takeshi Komino, Hajime Oiwa, Furitsu Suzuki, Atsushi Wakamiya, Yasujiro Murata, Chihaya Adachi Published in: Nature Communications DOI: 10.1038/ncomms9476 ABSTRACT Abstract Efficient organic light-emitting diodes have been developed using emitters containing rare metals, such as platinum and iridium complexes. However, there is an urgent need to develop emitters composed of more abundant materials. Here we show a thermally activated delayed fluorescence material for organic light-emitting diodes, which realizes both approximately 100% photoluminescence quantum yield and approximately 100% up-conversion of the triplet to singlet excited state. The material contains electron-donating diphenylaminocarbazole and electron-accepting triphenyltriazine moieties. The typical trade-off between effective emission and triplet-to-singlet up-conversion is overcome by fine-tuning the highest occupied molecular orbital and lowest unoccupied molecular orbital distributions. The nearly zero singlet–triplet energy gap, smaller than the thermal energy at room temperature, results in an organic light-emitting diode with external quantum efficiency of 29.6%. An external quantum efficiency of 41.5% is obtained when using an out-coupling sheet. The external quantum efficiency is 30.7% even at a high luminance of 3,000 cd m−2. Electroluminescence (EL) was initially studied for fundamental interest1,2,3. Tang and VanSlyke4 subsequently applied EL in organic light-emitting diodes (OLEDs), obtaining an external EL quantum efficiency (EQE) of 1% for a double-layer fluorescent OLED. OLEDs have since been studied extensively, with particular focus on increasing their efficiency in display and lighting applications. EQE (ηEQE) is the product of the internal quantum efficiency (IQE) and light out-coupling factor (ηout), ηEQE=IQE × ηout. ηout is typically 20–30% (refs 5, 6, 7, 8). IQE is obtained from IQE=β × γ × ΦPL, where β is the exciton generation factor resulting in photons, γ is the carrier balance ratio of holes and electrons, and ΦPL is the photoluminescence (PL) quantum yield (PLQY). Singlet and triplet excitons are theoretically generated in a 1:3 ratio by electronic excitation3. Triplet excitons typically dissipate as heat rather than being converted into photons. Because only singlet excitons generate photons, the resulting β for fluorescent OLEDs is limited to 25%. Even under conditions where γ and ΦPL are 100%, the theoretical maximum ηEQE of the resulting OLED is only 5–7.5%. Increasing β and ηout are therefore important challenges to maximize EQE. β can be increased directly using triplet excitons. The heavy-atom effect can convert triplet excitons into phosphorescence. Intersystem crossing (ISC) involves transition from the singlet to triplet state, and can theoretically result in 100% of excitons being extracted as photons. The EQE of the first device based on such a concept in 1998 was 4% (ref. 9), and subsequently reached 19% in 2001 (ref. 10). EQEs exceeding 20% are now frequently reported for optimized devices incorporating well-designed materials11. However, phosphorescent materials for OLEDs are currently restricted to Pt and Ir complexes, which have limited availability and are expensive. Triplet excitons can also potentially be exploited by reverse ISC (RISC), which involves transition from the lowest energy triplet state (T1) to the lowest excited singlet state (S1)12,13,14,15,16. Converting triplet excitons to singlet excitons allows all excitons to be used to generate photons. This strategy has typically not been effective, because S1 is at a much higher energy than T1. Spin inversion is also required for this transition. However, fabrications of efficient OLEDs based on RISC have been attempted in recent years17,18,19,20,21. Unlike normal fluorescence, the fluorescence resulting from triplet–singlet transition is delayed, so we term it thermally activated delayed fluorescence (TADF). TADF occurs by two successive processes, shown in Fig. 1a as green arrows; RISC from T1 to S1, and subsequent radiative decay from S1 to the ground state (S0). RISC is effective when the energy difference between S1 and T1 (ΔEST) is small. The theoretical background (Supplementary Note 1) reveals that small ΔEST is achieved by separating highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) distributions. However, this HOMO–LUMO separation decreases the oscillator strength (f) between S1 and S0, which lowers PLQY21. [Figure: DACT-II.(a) Schematic illustration of the TADF process. (b) Structure of DACT-II. (c) HOMO and LUMO distributions in DACT-II calculated at the PBE0/6-31G(d) level of theory. (d) Device structure and energy band diagram of DACT-II-x OLEDs. For the DACT-II-100 OLED, the EML consisted of DACT-II without CBP. Energy band diagrams of the reference fluorescent and phosphorescent OLEDs and other DACT-II-x OLEDs are shown in Supplementary Fig. 4.] Here we report an organic TADF material, 9-[4-(4,6-diphenyl-1,3,5-triazin-2-yl)phenyl]-N,N,N′,N′-tetraphenyl-9H-carbazole-3,6-diamine, named DACT-II (Fig. 1b). DACT-II consists of electron-donating diphenylaminocarbazole and electron-accepting triphenyltriazine moieties, chemically bonded at a torsion angle α (Fig. 1b). We will demonstrate that both nearly zero ΔEST, which is smaller than the thermal energy at room temperature, and large f, resulting in a PLQY of 100%, are simultaneously achieved by precisely controlling the HOMO and LUMO distributions (Fig. 1c and Supplementary Fig. 1, the geometries were optimized at the PBE0/6-31G(d) level22,23 using the Gaussian 09 software package24), although the two factors are considered to be in a trade-off relationship. The small ΔEST and large f of DACT-II allow ‘all injected holes and electrons to be used in fluorescence', resulting in an IQE of 100%. DACT-II-based OLEDs exhibit a maximum EQE of 29.6% in the absence of out-coupling treatment, indicating an IQE of ∼100%. The only loss of quantum efficiency in the device is via light out-coupling. A maximum EQE of 41.5% is obtained simply using an out-coupling sheet. Importantly, DACT-II also allows the typical substantial decrease in EQE with increasing luminance (efficiency roll-off) to be overcome. In DACT-II, S1 and T1 excitons are rapidly converted to photons because of its large f and small ΔEST. The rapid removal of both S1 and T1 excitons in the optimized DACT-II-based OLEDs suppresses triplet–triplet annihilation (TTA) and singlet–triplet annihilation, which are an origin of roll-off. Very high EQE up to 30.7% is achieved at 3,000 cd m−2. RESULTS Organic light-emitting diodes DACT-II, which consists only of C, H and N, was synthesized as described in Supplementary Note 2 and Supplementary Fig. 2. DACT-II has favourable thermal properties, with melting and decomposition temperatures of 266 °C and 484 °C, respectively. The sublimation temperature under vacuum was 308 °C. The glass transition temperature (Tg) of bulk amorphous DACT-II (∼6 mg) measured by conventional differential scanning calorimetry (DSC) at heating rates of 1–100 K min−1 was 151–159 °C. We also attempted DSC measurements for DACT-II in vacuum-deposited amorphous thin films with a thickness of 100 nm (∼20 ng). The ultrasensitive measurements were successful using very fast heating rates of 500–3,000 K s−1, giving Tg of 192–197 °C. Tg of the thin films was higher than that of bulk samples, although it would be decreased by extrapolating to a lower heating rate. The higher Tg probably reflects the higher thermal stability of vacuum-deposited thin films than bulk samples25 (Supplementary Note 3). DACT-II was then used as an emitting material for OLEDs (DACT-II devices). Supplementary Fig. 3 shows the materials for the devices; N,N′-di(naphthalen-1-yl)-N,N′-diphenyl-[1,1′-biphenyl]-4,4′-diamine (NPD) or 4,4′-(cyclohexane-1,1-diyl)bis(N,N-di-p-tolylaniline) (TAPC) was used for the hole-transport layer (HTL), ([1,1′-biphenyl]-4-yloxy)bis((2-methylquinolin-8-yl)oxy)aluminium (BAlq) or 3,3′′,5,5′′-tetra(pyridin-3-yl)-1,1′:3′,1′′-terphenyl (BmPyPhB) for the electron-transport layer (ETL), lithium quinolin-8-olate (Liq) for the electron-injection layer (EIL) and 4,4′-di(9H-carbazol-9-yl)-1,1′-biphenyl (CBP) for the host material

Read the complete text