Low-threshold amplified spontaneous emission and lasing from colloidal nanocrystals of caesium lead halide perovskites.

Yakunin S, Protesescu L, Krieg F, Bodnarchuk MI, Nedelcu G, Humer M, De Luca G, Fiebig M, Heiss W, Kovalenko MV. · 2015

Read Low-threshold amplified spontaneous emission and lasing from colloidal nanocrystals of caesium lead halide perovskites. by Yakunin S, Protesescu L, Krieg F, Bodnarchuk MI, Nedelcu G, Humer M, De Luca G, Fiebig M, Heiss W, Kovalenko MV. (2015) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/europmc-pmc4560790.txt.

Introduction

Sergii Yakunin leads a ten-author team making tiny perovskite crystals lase, in Nature Communications in 2015. Perovskite semiconductors have surged as light materials, but almost all work used films or bulk crystals. What uniform nanocrystals of the caesium lead halide family would do with light was nearly unstudied.

The crystals, about 10 nanometers across, amplified light at room temperature across the whole visible range, from 440 to 700 nanometers. The energy needed to start was low, and the gain high. Two laser forms were shown: light whispering around coated silica spheres, and random lasing from crystal films. The results extend perovskites toward cheap, color-tunable light sources.

Catalog record

CREATORYakunin S, Protesescu L, Krieg F, Bodnarchuk MI, Nedelcu G, Humer M, De Luca G, Fiebig M, Heiss W, Kovalenko MV.
YEAR2015
COLLECTIONPAPERS
FORMATTXT
FILE SIZE39 KB
LICENSECC BY 4.0
RIGHTSCC BY
SOURCEEurope PMC

Source: https://europepmc.org/articles/PMC4560790

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Low-threshold amplified spontaneous emission and lasing from colloidal nanocrystals of caesium lead halide perovskites By Sergii Yakunin, Loredana Protesescu, Franziska Krieg, Maryna I Bodnarchuk, Georgian Nedelcu, Markus Humer, Gabriele De Luca, Manfred Fiebig, Wolfgang Heiss, Maksym V Kovalenko Published in: Nature Communications DOI: 10.1038/ncomms9056 ABSTRACT Abstract Metal halide semiconductors with perovskite crystal structures have recently emerged as highly promising optoelectronic materials. Despite the recent surge of reports on microcrystalline, thin-film and bulk single-crystalline metal halides, very little is known about the photophysics of metal halides in the form of uniform, size-tunable nanocrystals. Here we report low-threshold amplified spontaneous emission and lasing from ∼10 nm monodisperse colloidal nanocrystals of caesium lead halide perovskites CsPbX3 (X=Cl, Br or I, or mixed Cl/Br and Br/I systems). We find that room-temperature optical amplification can be obtained in the entire visible spectral range (440–700 nm) with low pump thresholds down to 5±1 μJ cm−2 and high values of modal net gain of at least 450±30 cm−1. Two kinds of lasing modes are successfully observed: whispering-gallery-mode lasing using silica microspheres as high-finesse resonators, conformally coated with CsPbX3 nanocrystals and random lasing in films of CsPbX3 nanocrystals. Recent years have seen multiple reports demonstrating outstanding optoelectronic characteristics of metal halide semiconductors with perovskite crystal structures, in the form of thin films, microcrystals and bulk single crystals1,2,3,4,5,6,7,8,9,10,11. In particular, hybrid organic–inorganic lead halide perovskites such as MAPbX3 (where MA=methyl ammonium and X=Cl, Br or I, or mixed Cl/Br and Br/I systems) have shown great potential as both light-absorbing and light-emitting direct-bandgap solution-deposited semiconductors. As absorber layers, MAPbX3 materials have enabled inexpensive solar cells with certified power conversion efficiencies of up to 20% (NREL efficiency chart, www.nrel.gov)12 and highly sensitive solution-cast photodetectors operating in the visible13, ultraviolet14 and X-ray15 spectra regions. Owing to their bright photoluminescence (PL), MAPbX3 thin films and nanowires have been used in electrically driven light-emitting diodes16 and as optical gain media for lasing17,18,19,20,21. We have recently shown that similarly high optoelectronic quality is also accessible in fully inorganic CsPbX3 analogues, when these compounds are synthesized in the form of colloidal nanocrystals (NCs)22. In particular, CsPbX3 NCs exhibit bright emission with PL quantum yields (QYs) reaching 90% and narrow emission linewidths of 70–100 meV (12–40 nm, for PL peaks from 410 to 700 nm, correspondingly). Precise and continuous tuning of bandgap energies over the entire visible spectral region is achievable foremost via compositional control (mixed halide Cl/Br and Br/I systems), but also through quantum-size effects. CsPbX3 NCs appear to be largely free from mid-gap trap states, similar to their MAPbX3 cousins23. Both molecular solutions of MAPbX3 and colloidal solutions of CsPbX3 NCs share the common feature of facile solution deposition on arbitrary substrates. Further, CsPbX3 NCs are readily miscible with other optoelectronic materials (polymers, fullerenes and other nanomaterials) and feature surface-capping ligands for further adjustments of the electronic and optical properties, and solubility in various media. We also note that CsPbX3 NCs are formed in the pure cubic perovskite phase, in which PbX6 octahedra are three-dimensionally interconnected by corner-sharing. In contrast, their bulk counterparts exist exclusively in wider-bandgap one-dimensional orthorhombic phases at ambient conditions24,25,26. This disparity is most pronounced for red-emitting CsPbI3 NCs that exhibit a narrow gap of down to 1.75 eV, whereas the corresponding bulk material has a ca. 1 eV larger bandgap and is yellow-colored and non-luminescent. A key practical advantage of CsPbX3 NCs is the facile access to the blue–green spectral region of 410–530 nm via one-pot synthesis22. In comparison, common metal chalcogenide colloidal quantum dots such as CdSe NCs need to be extremely small (≤5 nm) to emit in the blue–green, and as-synthesized they exhibit rather low PL QYs of ≤5% due to mid-gap trap states. In addition, they are chemically and photochemically unstable, and require coating with an epitaxial layer of a more chemically robust, wider-gap semiconductor, such as CdS. On the other hand, narrow emission linewidths of ca. 100 meV, high PL QYs of up 90% and high photochemical stability have been achieved for Cd-chalcogenide NCs as the result of two decades of research efforts to precisely engineer core-shell morphologies with independent control of the core and shell compositions and thicknesses (for example, CdSecore/ZnCdSshell or ‘giant-shell' CdSecore/CdSshell)27,28,29,30 and anisotropic CdSe–CdS dot-in-rod and platelet-like morphologies31,32. Overall, each of these two families of colloidal semiconductors—CsPbX3 NCs and Cd-chalcogenide nanostructures—feature their respective advantages. Inspired by the highly efficient PL of CsPbX3 NCs, in this study we investigate the possibility of using CsPbX3 NCs as an inexpensive optical gain medium. First, for thin films of CsPbX3 NCs, we report the observation of amplified spontaneous emission (ASE), tunable over most of the visible range (440–700 nm) with low pump thresholds down to 5±1 μJ cm−2 and high values of modal net gain of at least 450 cm−1. Among other colloidal semiconductor materials, such low-threshold pump fluencies have only been previously demonstrated for colloidal CdSe and CdSe/CdS nanoplatelets33,34,35, whereas CdSe/ZnCdS NCs exhibit higher thresholds (from 800 μJ cm−2 in the blue to 90 μJ cm−2 in the red)28 presumably due to stronger Auger recombination36. We then realize two different lasing regimes for CsPbX3 NCs depending on the resonator configuration: whispering-gallery-mode (WGM) lasing using single silica microsphere resonators, conformally coated with CsPbX3 NCs, and random lasing in CsPbX3 NC films. RESULTS Basic characteristics of CsPbX3 NCs in solutions and in films As-synthesized CsPbX3 NCs, capped with oleylamine and oleic acid as surface ligands, form stable colloidal dispersions in typical nonpolar solvents such as toluene (Fig. 1a)22. For the spectroscopic studies in this work, we selected monodisperse samples of cubic-shaped NCs with mean sizes of ca. 9–10 nm (Fig. 1b). These NCs readily form uniform, compact films of sub-micron thickness on drop-casting onto a glass substrate. [Figure: Colloidal caesium lead halide perovskite NCs.(a) Stable dispersions in toluene under excitation by a ultraviolet lamp (λ=365 nm). (b) Low- and high-resolution transmission electron microscopy images of CsPbBr3 NCs; corresponding scale bars are 100 and 5 nm. (c) PL spectra of the solutions shown in (a). (d) Optical absorption and PL spectra of a ca. 400-nm-CsPbBr3 NC film.] The bandgap of CsPbX3 NCs is controlled via compositional modulations, for example, by altering the Cl/Br ratio for the 410–530 nm range, and Br/I ratio for the 530–700 nm range (Fig. 1c). A pronounced excitonic peak is preserved in the absorption spectrum of the CsPbBr3 NC film (Fig. 1d). The absorption coefficients of the densely packed films are in the range of (3.6–4.0)·104 cm−1 (or 3.6–4.0 μm−1), indicating that up to 70–80% of the pumping laser light (λ=400 nm) is absorbed by 300–400-nm thick films. The refractive index of a CsPbBr3 NC film is estimated to be 1.85–2.30 at 400–530 nm from the optical reflectance and absorption spectra (Supplementary Fig. 1). The PL from this NC film exhibits a peak with a narrow linewidth of 25 nm (110 meV), Stokes-shifted by 13 nm (57 meV) with respect to the excitonic absorption peak (Fig. 1d). The PL QYs of the same NCs in the solution reach values of up to 70–90% (for green-to-red-emitting NCs) indicating a high degree of electronic surface passivation. The PL lifetimes are very similar for solutions and for films (Supplementary Fig. 2; 1–22 ns, longer for lower-bandgap NCs). PL

Read the complete text