High-quality bulk hybrid perovskite single crystals within minutes by inverse temperature crystallization.
Saidaminov MI, Abdelhady AL, Murali B, Alarousu E, Burlakov VM, Peng W, Dursun I, Wang L, He Y, Maculan G, Goriely A, Wu T, Mohammed OF, Bakr OM. · 2015
Read High-quality bulk hybrid perovskite single crystals within minutes by inverse temperature crystallization. by Saidaminov MI, Abdelhady AL, Murali B, Alarousu E, Burlakov VM, Peng W, Dursun I, Wang L, He Y, Maculan G, Goriely A, Wu T, Mohammed OF, Bakr OM. (2015) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/europmc-pmc4544059.txt.
Introduction
Makhsud I. Saidaminov leads a twelve-author team growing solar crystals in minutes, in Nature Communications in 2015. Single crystals of methylammonium lead halide perovskites carry charge well and trap it rarely, traits wanted for solar cells and lasers. Growing them in high quality, though, took days of slow work.
The trick exploits a quirk: in certain solvents these crystals dissolve less as the liquid heats up, the reverse of normal behavior. Heating therefore forces crystals out of solution fast. By tuning the setup, the team controlled crystal size and shape. The quick-grown crystals matched the best slow-grown ones in charge transport and trap counts. The authors present the method as a major step for perovskite crystal work.
Catalog record
| CREATOR | Saidaminov MI, Abdelhady AL, Murali B, Alarousu E, Burlakov VM, Peng W, Dursun I, Wang L, He Y, Maculan G, Goriely A, Wu T, Mohammed OF, Bakr OM. |
|---|---|
| YEAR | 2015 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 27 KB |
| LICENSE | CC BY 4.0 |
| RIGHTS | CC BY |
| SOURCE | Europe PMC |
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
High-quality bulk hybrid perovskite single crystals within minutes by inverse temperature crystallization By Makhsud I. Saidaminov, Ahmed L. Abdelhady, Banavoth Murali, Erkki Alarousu, Victor M. Burlakov, Wei Peng, Ibrahim Dursun, Lingfei Wang, Yao He, Giacomo Maculan, Alain Goriely, Tom Wu Published in: Nature Communications DOI: 10.1038/ncomms8586 ABSTRACT Single crystals of methylammonium lead trihalide perovskites (MAPbX3; MA=CH3NH3+, X=Br− or I−) have shown remarkably low trap density and charge transport properties; however, growth of such high-quality semiconductors is a time-consuming process. Here we present a rapid crystal growth process to obtain MAPbX3 single crystals, an order of magnitude faster than previous reports. The process is based on our observation of the substantial decrease of MAPbX3 solubility, in certain solvents, at elevated temperatures. The crystals can be both size- and shape-controlled by manipulating the different crystallization parameters. Despite the rapidity of the method, the grown crystals exhibit transport properties and trap densities comparable to the highest quality MAPbX3 reported to date. The phenomenon of inverse or retrograde solubility and its correlated inverse temperature crystallization strategy present a major step forward for advancing the field on perovskite crystallization. Organo-lead trihalide hybrid perovskites (MAPbX3; MA=CH3NH3+, X=Br− or I−) have been widely investigated for solar cells12345678, lasing9, light-emitting diodes10, photodetectors11 and hydrogen production12. This considerable interest in organo-lead trihalide perovskites is because of their tunable optical properties, high-absorption coefficients, long-ranged balanced electron and hole transport13, low cost and facile deposition techniques141516. In particular, single crystals of MAPbBr3 and MAPbI3 were shown to possess long carrier diffusion lengths and a remarkably low trap-state densities, which is comparable to the best photovoltaic-quality silicon17. These properties provide a view of the ultimate potential of hybrid perovskites, and make single crystals of MAPbX3 a highly desirable semiconductor for optoelectronic applications that are much broader than their polycrystalline thin film counterpart. However, the reported solution crystallization processes for perovskite single crystals suffer from very slow growth rates and no shape control over the resultant crystals1718192021. The highest reported growth rate was estimated to be ∼26 mm3 per day (∼1 mm3 h−1), based on a MAPbI3 crystal with the dimensions of 10 mm × 10 mm × 8 mm that took a month to grow20. A radically faster crystallization technique that could also address the need for a diverse variety of crystal geometries will allow more extensive use of hybrid perovskite single crystals. The choice of a suitable solvent medium has always been a defining factor for the quality of the ensuing crystals. In the case of hybrid perovskites, the most widely used solvents are γ-butyrolactone (GBL), N,N-dimethylformamide (DMF) and dimethylsulphoxide (DMSO). The solubility of PbX2 and MAX in these solvents or their mixtures was found to vary; hence, it was previously reported that MAPbBr3 crystallized more aptly from DMF while MAPbI3 crystallized better from GBL17. Perovskite crystallization from aqueous solution was also reported, in which crystals were formed, classically, on cooling a preheated solution20. It is generally the norm that solutes tend to have a higher degree of solubility at higher temperatures; hence, a good solvent for crystallization will dissolve more precursors when hot, while cooling down induces supersaturation commencing the crystallization. On the other hand, a decrease of solute solubility in solvents with increasing temperature (that is, inverse temperature or retrograde solubility) is a rare occurrence, that is, only displayed by a few materials22. Here we show that MAPbX3 perovskites exhibit inverse temperature solubility behaviour in certain solvents. This novel phenomenon in hybrid perovskites enabled us to design an innovative crystallization method for these materials, referred to here as inverse temperature crystallization (ITC), to rapidly grow high-quality size- and shape-controlled single crystals of both MAPbBr3 and MAPbI3, at a rate that is an order of magnitude faster than the previously reported growth methods1718192021. The versatility of our approach provides the continuous enlargement of crystals, through replacement of the depleted growth solution, and the use of templates for controlling their shapes. RESULTS Single crystal growth and structural characterization We noticed the rapid formation of small MAPbBr3 perovskite precipitates at high temperatures in some concentrated solutions (for example, DMF) and not in others (for example, DMSO). On the other hand, GBL could not be used as a solvent because of the very low solubility of MAPbBr3 (<0.05 g ml−1 at both room temperature and 80 °C). The effect of the different solvents could be related to their varying degrees of coordination with the precursors, as it was previously reported that DMSO may retard the crystallization process because of its strong binding to the lead precursor232425. Consequently, DMF was chosen for MAPbBr3 ITC. Through studying the solubility of MAPbBr3 in DMF, we observed that it drops markedly from 0.80±0.05 g ml−1 at room temperature to 0.30±0.05 g ml−1 at 80 °C. This inverse solubility phenomenon was used to crystallize MAPbX3 rapidly in hot solutions as illustrated in Fig. 1a. Through balancing both temperature and concentration of precursors in DMF, only a few crystals were formed. For instance, by setting the temperature of the heating bath at 80 °C usually <5 crystals are formed in case of 1 M solution of PbBr2 and MABr (Supplementary Fig. 1). Inspired by this observation, we repeated the same procedure and studied different solvents that could lead to the same effect in MAPbI3. Unlike MAPbBr3, ITC of MAPbI3 was only possible in GBL solution, while no precipitates were observed in the case of DMF or DMSO. As expected, we observed that the crystallization process in both MAPbBr3 and MAPbI3 is reversible and the crystals dissolve back when cooled to room temperature. It is also worth mentioning that individual precursors PbX2 and MAX did not show any inverse solubility behaviour (that is, saturated solutions of the individual precursor did not show precipitation on heating), implying that the phenomenon is tied to the perovskite structure. The growth process of MAPbI3 crystal using the ITC technique was recorded on video using time-accelerated mode (Supplementary Movie 1), several snapshots of which are shown in Fig. 1b. Individual MAPbI3 crystal was calculated to grow at a rate of ∼3 mm3 h−1 for the first hour, a rate that significantly increases to ∼9 mm3 h−1 for the second hour and to ∼20 mm3 h−1 for the following hour. This value is an order of magnitude greater than the previously reported highest growth rate20. An even faster growth rate was observed for MAPbBr3 crystals, reaching up to 38 mm3 h−1 for the third hour (Fig. 1c), resulting in a higher yield in comparison with MAPbI3. Powder X-ray diffraction patterns of the ground crystals demonstrate pure perovskite phase for both MAPbBr3 and MAPbI3 (Fig. 1d,e). Single-crystal X-ray diffraction analysis showed a good match with previous single crystals grown at room temperature using antisolvent vapour-assisted crystallization17 (Supplementary Table 1). Scanning electron microscopy images of the cleaved crystals show the absence of any grain boundaries, indicating the single-crystalline nature of both crystals (Supplementary Fig. 2). Further growth of the crystal was achieved by carefully removing the crystal and placing it in a fresh 1 M solution of the precursors (Fig. 2a). As shown in Supplementary Movie 2 for MAPbBr3, we observed a possible shape control of the crystal by the geometry of crystallization vessel. Hence, single crystals of