Long-life Li/polysulphide batteries with high sulphur loading enabled by lightweight three-dimensional nitrogen/sulphur-codoped graphene sponge.

Zhou G, Paek E, Hwang GS, Manthiram A. · 2015

Read Long-life Li/polysulphide batteries with high sulphur loading enabled by lightweight three-dimensional nitrogen/sulphur-codoped graphene sponge. by Zhou G, Paek E, Hwang GS, Manthiram A. (2015) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/europmc-pmc4518288.txt.

Introduction

Guangmin Zhou, Eunsu Paek, Gyeong S. Hwang, and Arumugam Manthiram report a longer-lived sulfur battery in Nature Communications in 2015. Lithium-sulfur cells promise far more stored energy than today's lithium-ion cells, a draw for electric cars and grid storage. Weak points have held them back: sulfur is poorly used, loadings stay low, and capacity fades fast.

Their electrode is a sponge of graphene, a carbon sheet material, doped with nitrogen and sulfur. The sponge holds a heavy sulfur load, moves charge fast, and traps the wandering sulfur chains that drain capacity. Computer checks confirmed the doped sites grip those chains strongly. Cells reached high capacity at slow rates, kept useful output at fast rates, and ran 500 cycles with slow fade.

Catalog record

CREATORZhou G, Paek E, Hwang GS, Manthiram A.
YEAR2015
COLLECTIONPAPERS
FORMATTXT
FILE SIZE53 KB
LICENSECC BY 4.0
RIGHTSCC BY
SOURCEEurope PMC

Source: https://europepmc.org/articles/PMC4518288

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Long-life Li/polysulphide batteries with high sulphur loading enabled by lightweight three-dimensional nitrogen/sulphur-codoped graphene sponge By Guangmin Zhou, Eunsu Paek, Gyeong S Hwang, Arumugam Manthiram Published in: Nature Communications DOI: 10.1038/ncomms8760 ABSTRACT Abstract Lithium–sulphur batteries with a high theoretical energy density are regarded as promising energy storage devices for electric vehicles and large-scale electricity storage. However, the low active material utilization, low sulphur loading and poor cycling stability restrict their practical applications. Herein, we present an effective strategy to obtain Li/polysulphide batteries with high-energy density and long-cyclic life using three-dimensional nitrogen/sulphur codoped graphene sponge electrodes. The nitrogen/sulphur codoped graphene sponge electrode provides enough space for a high sulphur loading, facilitates fast charge transfer and better immobilization of polysulphide ions. The hetero-doped nitrogen/sulphur sites are demonstrated to show strong binding energy and be capable of anchoring polysulphides based on first-principles calculations. As a result, a high specific capacity of 1,200 mAh g−1 at 0.2C rate, a high-rate capacity of 430 mAh g−1 at 2C rate and excellent cycling stability for 500 cycles with ∼0.078% capacity decay per cycle are achieved. As energy storage devices, lithium-ion batteries (LIBs) play a dominant role in portable electronic devices due to their high performance compared with other battery systems1,2. However, the increased demand for electric vehicles and large-scale smart grid stringently requires batteries with high-energy density, low cost and long cycle life3. The current main challenge is the capacity mismatch between the cathode and anode, which makes LIB approach its theoretical energy density limits4,5. The relatively lagged progress on cathodes becomes a barrier in further improving the energy density of LIBs, which has triggered the exploration of new electrochemical systems, such as the Lithium–sulphur (Li–S) batteries with a high theoretical energy density of 2,600 Wh kg−1 (refs 6, 7). Despite the considerable advantages of Li–S battery, several problems prevent it from practical applications: (1) the insulating characteristic of sulphur and its discharge products (Li2S), leading to a low utilization of active material; (2) large volumetric expansion/shrinkage (80%) during discharge/charge, resulting in an instability of the electrode structure; (3) the soluble intermediates (Li2Sx, 3≤x≤8) in the organic liquid electrolyte during the cycle process bring about the polysulphide ‘shuttle effect', which leads to irreversible capacity loss and corrosion on the lithium-metal anode4,8,9. Much effort has been devoted to solving these issues: improving the electrical conductivity of the sulphur electrode by integrating with carbon materials or conductive polymers8,9,10,11,12,13,14; designing yolk-shell structure with internal void space to accommodate the volume expansion of sulphur15,16; using novel electrolyte additives such as P2S5 or Cs+ to suppress the polysulphide shuttle and passivate the lithium-metal surface17,18; and modifying the surface chemistry of the hosts to prevent the shuttle effect of the soluble polysulphides between the cathode and the anode, enabling better cycle performance19,20,21,22. However, the areal loading of sulphur electrode in most of the reported work is <2.0 mg cm−2 and the sulphur content in the electrode is <70 wt. %, which are not enough to satisfy the demands for high-energy density batteries5,12,23,24,25. Generally, conventional electrode requires the use of inactive materials such as conductive agents, metallic current collectors and binders, which will also offset the high-energy density advantage of Li–S batteries. Moreover, flat current collectors face the challenge of increasing the electrode thickness due to the easy delamination of active materials and limitation in lithium diffusion kinetics. Therefore, three-dimensional (3D) battery electrode design has recently been explored as an effective way to enhance the energy per surface area of batteries26,27. For example, Miao et al.28 synthesized 3D carbon fibre cloth current collectors to host sulphur for achieving high sulphur loading and high areal capacity in Li–S batteries; Wu's group29 impregnated sulphur into a 3D graphene framework to increase the sulphur areal mass loading in the composite electrodes; Yuan et al.30 adopted a bottom-up strategy to fabricate 3D hierarchical free-standing carbon nanotube-S paper electrodes to improve the sulphur content; and Cheng's group31 reported flexible 3D graphene foams as the current collector to accommodate large amount of sulphur with high areal capacity. However, with the increase of sulphur loading, the internal sulphur is not easily accessible to the electrolytes and hard to be used rapidly, which leads to the phenomenon of ‘sulphur activation' with lower capacity in the initial few cycles28,29,31. Therefore, a simpler and more effective way to enable high sulphur utilization, especially when sulphur loading is high, is still challenging while worth exploring. Instead of adopting solid sulphur as the precursor followed by melt-diffusion or liquid infiltration methods, the dissolved lithium polysulphide systems have recently been proved to make active materials distribute more uniformly, improve sulphur utilization, alleviate electrode structure variation and facilitate the kinetics of the Li–S redox reaction5,7,32,33,34,35. Taking the above discussion into consideration, we present the use of a lightweight, porous nitrogen- and sulphur- (abbreviated as N, S) codoped 3D graphene sponge as the additive/binder-free electrode structure to accommodate large amounts of dissolved lithium polysulphides. The active materials could reach as high as 4.6 mg cm−2 when the graphene sponge is employed as a 3D current collector. The interconnected graphene network facilitates fast electron and ion transfer. The sulphur and/or nitrogen doping could facilitate fast charge transfer, increase the affinity between the polysulphide species and the carbon-based framework, facilitate better immobilization of the polysulphide ions, and promote the Li2S/polysulphide/S reversible conversion to improve the electrochemical performance of Li–S batteries19,21,22,36. The combination of physical adsorption of lithium polysulphides onto porous graphene and the chemical binding of polysulphides to N and S sites in graphene suppresses sulphur loss during the discharge/charge processes, enabling a high specific capacity of 1,200 mAh g−1 at 0.2C rate, a high-rate capacity of 430 mAh g−1 at 2C rate and excellent cycling stability for 500 cycles with nearly 100% Coulombic efficiency for the N,S-codoped graphene electrode. RESULTS Synthesis and characterization of graphene-based sponges Figure 1a demonstrates the typical photographs of the as-prepared reduced graphene oxide (rGO), S-doped graphene, N-doped graphene and N,S-codoped graphene sponges obtained by hydrothermal reaction using, respectively, GO, GO/Na2S, GO/urea and GO/thiourea as precursors followed by freeze-drying. Na2S, urea and thiourea were employed as sulphur, nitrogen and nitrogen/sulphur sources, as well as reducing agents for GO during the hydrothermal assembly process. After freeze-drying, the morphology of the samples was retained and no obvious shrinkage/expansion is observed. The size and shape of the graphene-based sponges can be adjusted by controlling the concentration of GO, reaction temperature and the volume/shape of the used autoclaves. The freeze-dried N,S-codoped graphene sponge is light and can stand stably on the top of a dandelion without deforming it at all (Fig. 1b), which makes it a good candidate as a lightweight 3D current collector. It can be cut and pressed into slices for direct use as a host for dissolved lithium polysulphides without metal current collectors, binders and conductive additives, and the sulphur/nitrogen doping in graphene is suggested to interact with lithium polysulphide/Li2S to improve the cycle stability of Li–S batteries, as illustrated in Fig. 1c. [Figure: Photographs of graphene sponges and schematic model of the assembled cell.(a) Photographs of the rGO, S-doped graphene, N-doped graphene and N,S-codoped graphene sponges after the hydrothermal reaction and freeze-drying. (b) A lightweight N,S-codoped graphene sponge standing on a dandelion. (c) Illustration of the

Read the complete text