Perovskite-fullerene hybrid materials suppress hysteresis in planar diodes.
Xu J, Buin A, Ip AH, Li W, Voznyy O, Comin R, Yuan M, Jeon S, Ning Z, McDowell JJ, Kanjanaboos P, Sun JP, Lan X, Quan LN, Kim DH, Hill IG, Maksymovych P, Sargent EH. · 2015
Read Perovskite-fullerene hybrid materials suppress hysteresis in planar diodes. by Xu J, Buin A, Ip AH, Li W, Voznyy O, Comin R, Yuan M, Jeon S, Ning Z, McDowell JJ, Kanjanaboos P, Sun JP, Lan X, Quan LN, Kim DH, Hill IG, Maksymovych P, Sargent EH. (2015) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/europmc-pmc4432582.txt.
Introduction
Jixian Xu and a large team of co-authors reported a hybrid material for solar cells in Nature Communications in 2015. Perovskites are crystals that can be made from solution and convert light to electricity well, a promise for cheap solar power. Flat perovskite devices, though, often show hysteresis, meaning their output depends on how they were just used, plus wasteful energy loss.
Mixing a carbon-based material called PCBM into the perovskite in one step cut both problems. The added material spread evenly at crystal borders and mended key atomic defects as the film formed, and light tests showed it helped pull electrons out. Solar cells made this way showed low hysteresis and higher voltage. The authors also propose that tying up loose halide atoms slows the ion drift behind unstable behavior.
Catalog record
| CREATOR | Xu J, Buin A, Ip AH, Li W, Voznyy O, Comin R, Yuan M, Jeon S, Ning Z, McDowell JJ, Kanjanaboos P, Sun JP, Lan X, Quan LN, Kim DH, Hill IG, Maksymovych P, Sargent EH. |
|---|---|
| YEAR | 2015 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 36 KB |
| LICENSE | CC BY 4.0 |
| RIGHTS | CC BY |
| SOURCE | Europe PMC |
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Perovskite–fullerene hybrid materials suppress hysteresis in planar diodes By Jixian Xu, Andrei Buin, Alexander H Ip, Wei Li, Oleksandr Voznyy, Riccardo Comin, Mingjian Yuan, Seokmin Jeon, Zhijun Ning, Jeffrey J McDowell, Pongsakorn Kanjanaboos, Jon-Paul Sun Published in: Nature Communications DOI: 10.1038/ncomms8081 ABSTRACT Abstract Solution-processed planar perovskite devices are highly desirable in a wide variety of optoelectronic applications; however, they are prone to hysteresis and current instabilities. Here we report the first perovskite–PCBM hybrid solid with significantly reduced hysteresis and recombination loss achieved in a single step. This new material displays an efficient electrically coupled microstructure: PCBM is homogeneously distributed throughout the film at perovskite grain boundaries. The PCBM passivates the key PbI3− antisite defects during the perovskite self-assembly, as revealed by theory and experiment. Photoluminescence transient spectroscopy proves that the PCBM phase promotes electron extraction. We showcase this mixed material in planar solar cells that feature low hysteresis and enhanced photovoltage. Using conductive AFM studies, we reveal the memristive properties of perovskite films. We close by positing that PCBM, by tying up both halide-rich antisites and unincorporated halides, reduces electric field-induced anion migration that may give rise to hysteresis and unstable diode behaviour. Solution-processed metal halide perovskites, especially the class of methyammonium lead halide perovskites (MAPbX3, where MA indicates methylammonium and X the halide), are attractive as solar energy harvesters due to efficient ambipolar transport and strong light absorption. Progress in perovskite photovoltaics has benefited from the use of mesoporous scaffolds1,2,3,4 that lessen the need for long minority carrier drift and diffusion by including the active light absorber within nanometre-sized electron-harvesting pores. Effort to improve device performance with such architectures has led to 1,000-h long-term stability 5 and, in separate studies, certified solar power efficiency exceeding 18% (refs 6, 7). Planar-electrode (as distinct from mesoporous) devices also hold important application such as in photodetector arrays (which demand stringent spatial uniformity pixel to pixel), lasers (which require planarity for low-scatter waveguiding) and flexible photovoltaics (which strive to avoid high-temperature mesoporous oxide processing)8,9,10,11,12,13. The performance of planar perovskite rectifying junction devices has, to date, suffered from two potentially interrelated concerns: severe hysteresis14,15,16, specifically scan-direction- and scan-speed-dependence of photo J–V characteristics17,18,19; and, relatedly, recombination, likely associated with defective grain boundaries induced by excess halides20,21,22,23,24. The dependence of hysteresis on device architectures has also been observed, where inverted structures have typically shown less serious hysteresis than regular planar devices, but a lower open-circuit voltage25,26. There has been, to date, no consensus as to the origins of these findings. Heterojunction contact engineering has been proposed to address this issue, such as the modification of the TiO2 contact layer using a C60 self-assembled monolayer27. Recent efforts have also sought to reduce hysteresis using interfacial treatment following the formation of perovskite films. However, these solid-state post-treatments typically feature long annealing steps at elevated temperature and therefore introduce undesirable complexity26,28. Furthermore, addition of passivants to the interface fails to address the defects found throughout the bulk21,29. Bearing these considerations in mind, we pursue a solution-phase in situ passivation strategy with the goal of enabling simple low-temperature processing and efficient passivation throughout the grain boundaries in the bulk of the perovskite active layer. RESULTS Improvement of hysteresis and photovoltaic performance In the course of device studies of mixed materials made from solutions containing both perovskites and the electron-acceptor PCBM (phenyl-C61-butyric acid methyl ester), we observe an enhancement in photovoltaic performance (Fig. 1a–c) and a reduction in hysteresis (Fig. 1d,e) relative to control devices based on perovskites alone, and also compared with separate-layer PCBM–perovskite devices (Table 1, see Supplementary Figs 1 and 2 for different device structures). To create the mixed-material films, we disperse PCBM and lead acetate (Pb(Ac)2; ref. 20) in various ratios and form films using a one-step process3,9,30,31 employing methylammonium iodide (MAI) as the organohalide precursor (see Methods). As well as observing reduced hysteresis (Fig. 1d,e), we observe in the perovskite–PCBM mixed-material device a substantial voltage enhancement (∼0.1 V; Fig. 1a) and a higher fill factor compared with the PCBM-free and bilayer PCBM–perovskite controls (Table 1). [Figure: Steady-state photovoltaic performance of an ultrathin perovskite–PCBM hybrid film.(a) The steady-state open-circuit voltage, VOC, (b) steady-state short circuit current density, JSC and (c) the steady-state power conversion efficiency, PCE, of perovskite–PCBM hybrid film (red) compared with the control perovskite-only film (blue). During steady-state measurement, the integrating time for each point is 0.35 s. (d) The instantaneous J–V curve of the control device (perovskite film) with high hysteresis. The thicker curve indicates forward scan starting from open-circuit condition; thin curve is the reverse scan from short circuit condition. The scanning rate is 0.2 V s−1. The fill factor (FF) of forward scan is 66% while reverse FF is reduced to 42%. The black point indicates the ‘maximum-power output point (MPP)' is measured from the steady-state PCE as shown in (c). The MPP here is located between two instantaneous J–V curves due to the significant hysteresis and current decay. (e) The J–V scan of a hybrid device shows very low hysteresis and low current loss, as shown in (b). The FF for forward (reverse) scan is 74% (70%). The steady-state MPP is consistent with the forward J–V curve, which demonstrates the stability of the hybrid film. The inset of figure (e) shows the external quantum efficiency (EQE) of a hybrid device. The current density predicted from EQE is 15.4 mA cm−2, consistent with the steady-state current density measured in (b); The inset figure of (d) shows the thickness of active layer in both devices is around 150 nm.] [Table: Statistics of steady-state performance with different PCBM distribution and thickness.] Mechanistic study of perovkite–PCBM interaction We proceed to seek mechanistic insights regarding the role, or roles, of the PCBM. Specifically, we asked whether the PCBM could interact with certain chemical species in the mixed-material solution and whether studies of incorporation into films using the new process indicated a homogeneous distribution of PCBM throughout the active layer, compared with segregation into a bilayer device with PCBM either substantially below or above the perovskite. Solution-phase spectroscopy provides one means to study the formation of complexes of PCBM with the various perovskite solution-phase precursors. When PCBM is mixed into our normal perovskite precursor solution, the bright yellow solution (Fig. 2a, left) turns dark brown (Fig. 2a, right). The absorption spectrum of perovskite–PCBM hybrid solution shows a peak at 1,020 nm (Fig. 2b)32,33,34. This is in contrast with pure PCBM in the same solvent, which is observed to be transparent in this wavelength region. The 1,020 nm spectral feature is associated in literature reports with the formation of a PCBM–halide radical (Fig. 2b, inset)32,33,34. [Figure: Perovskite–PCBM hybrid process and in situ passivation mechanism.(a) Pristine perovskite solution (left) comprised of Pb(Ac)2 and MAI in dimethylformamide solvent is bright yellow; the formulated perovskite–PCBM hybrid solution (right) is brown; Simple one-step spin-coating is used to convert the hybrid solution into an hybrid solid film, and the perovskite is in situ passivated by PCBM during self-assembly; (b) Ultraviolet–visible absorption spectroscopy of the hybrid solution shows the interaction between PCBM and perovksite ions. PCBM radical anion's absorption peak at 1,020 nm is identified in hybrid solution (red); while PCBM in same solvent (black) has no absorption peak in this wavelength region; Inset