Electrodeposition of hierarchically structured three-dimensional nickel-iron electrodes for efficient oxygen evolution at high current densities.

Lu X, Zhao C. · 2015

Read Electrodeposition of hierarchically structured three-dimensional nickel-iron electrodes for efficient oxygen evolution at high current densities. by Lu X, Zhao C. (2015) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/europmc-pmc4382694.txt.

Introduction

Xunyu Lu and Chuan Zhao built a cheap electrode that splits water efficiently, in Nature Communications in 2015. Making hydrogen by electrolysis needs an oxygen-making electrode that works hard without costly metals. The best known catalysts use iridium or ruthenium oxides, which are rare and pricey. The pair deposited a porous nickel-iron coating, as thin sheets full of tiny holes, directly onto nickel foam, a spongy metal support, using an electric plating method.

In alkaline solution the electrode started making oxygen at a low extra voltage of 200 millivolts. It delivered very high currents, 500 and 1,000 milliamps per square centimeter, at only slightly higher voltages. It also held up through long runs at high current. The authors present it as the most efficient oxygen electrode of its kind reported then, suited to industrial water splitting.

Catalog record

CREATORLu X, Zhao C.
YEAR2015
COLLECTIONPAPERS
FORMATTXT
FILE SIZE39 KB
LICENSECC BY 4.0
RIGHTSCC BY
SOURCEEurope PMC

Source: https://europepmc.org/articles/PMC4382694

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Electrodeposition of hierarchically structured three-dimensional nickel–iron electrodes for efficient oxygen evolution at high current densities By Xunyu Lu, Chuan Zhao Published in: Nature Communications DOI: 10.1038/ncomms7616 ABSTRACT Abstract Large-scale industrial application of electrolytic splitting of water has called for the development of oxygen evolution electrodes that are inexpensive, robust and can deliver large current density (>500 mA cm−2) at low applied potentials. Here we show that an efficient oxygen electrode can be developed by electrodepositing amorphous mesoporous nickel–iron composite nanosheets directly onto macroporous nickel foam substrates. The as-prepared oxygen electrode exhibits high catalytic activity towards water oxidation in alkaline solutions, which only requires an overpotential of 200 mV to initiate the reaction, and is capable of delivering current densities of 500 and 1,000 mA cm−2 at overpotentials of 240 and 270 mV, respectively. The electrode also shows prolonged stability against bulk water electrolysis at large current. Collectively, the as-prepared three-dimensional structured electrode is the most efficient oxygen evolution electrode in alkaline electrolytes reported to the best of our knowledge, and can potentially be applied for industrial scale water electrolysis. In an electrolytic water splitting cell, the production of H2 at the cathode is severely constrained by the sluggish kinetics of the oxygen evolution reaction (OER) on the anode1,2. As a consequence, highly efficient OER catalysts are required to lower the energy barrier to improve the overall energy efficiency. So far, IrO2 and RuO2 are the benchmark OER catalysts, owing to their high catalytic activity3. Nevertheless, these precious metals are costly and their supply is not sustainable, therefore, are not suitable for large-scale applications. Hence, enormous research efforts have been devoted to the development of low-cost OER electrocatalysts on the basis of first-row transition metals and their oxides such as cobalt phosphate composites, nickel borate composites, cobalt oxide nanoparticles and manganese oxide thin films4,5,6,7, which exhibit good OER activity with significantly lowered fabrication costs. Among these catalysts, nickel- and cobalt-based composites have shown promise as active catalyst materials for OER, which usually require overpotentials around 350~450 mV to deliver a current density (j) of 10 mA cm−2. To further enhance the OER activity of the transition metal-based catalysts to a level that is comparable to the benchmark IrO2 and RuO2 catalysts, several effective strategies have been reported including downscaling, and/or making nanoporous structures of the catalysts6,8,9,10,11, using carbon nanomaterials as substrates to immobilize nanoparticle catalysts12,13 and making multi-metallic catalysts by taking advantage of synergistic metal–metal interactions14,15,16,17. To be used for industrial applications, OER catalysts need to meet more strict criteria such as delivery of very high current densities (≥500 mA cm−2) at low overpotentials (≤300 mV), and mechanical robustness and prolonged durability during strong gas evolution1,3,18. Currently, most of the transition metal-based OER composite catalysts reported in literature are powders, which are subsequently coated onto conductive substrates with the aid of polymeric binders, for example, Nafion. The utilization of electrical insulating binders can decrease the contact area between electrolytes and catalytic active sites and deteriorate the electrical conductivity of electrode, leading to receded electrocatalytic performances19. The stability of the electrode is also relatively poor and the glued OER catalysts tend to peel off from the substrate especially under high current density and vigorous gas evolution conditions. Electrodeposition is a versatile and scalable industrial process that only requires simple equipment and enables precise control of the nucleation and growth processes, as well as the purity, structures and morphologies of the deposits obtained. Electrodeposition of metal oxides and composite catalysts (for example, NiFe) onto the surface of two-dimensional planar substrates have been reported20,21,22, which, however, usually has limited accessible active sites, as only the few outermost layers are in contact with electrolytes. Furthermore, bubbles generated during OER tend to accumulate on the planar substrates, resulting in significant bubble overpotentials, especially under high current densities and strong gas evolution conditions23,24,25. Fierro and co-workers recently studied the electrodeposition of NiFe onto several metal substrates and found that stainless steel mesh and nickel foam (NF) substrates offer higher activity for OER than nickel foil and mesh26. Nevertheless, the metallic NiFe films deposited via galvanostatic reduction of Ni2+ and Fe2+ are relatively thick (2~8 μm) with high degree of discontinuities, and the electrodes are unstable under long term, large current density operation for water electrolysis26. Herein, we report a hierarchically structured three-dimensional (3D) oxygen electrode prepared via a facile, one-step electrodeposition of amorphous, mesoporous nickel–iron hydroxide (NiFe) nanosheets onto NF substrates. The 3D interconnected bi-continuous macroscopic porous structure across the whole NF substrate offer very high specific surface area, electrical conductivity and integrity27,28. NiFe is prepared by co-electrodeposition of the Ni and Fe hydroxides onto the NF support, forming ultrathin nanosheets, without use of any binders. The 3D amorphous NiFe/NF is used directly as an oxygen electrode with outstanding OER performance at high current density and low overpotentials. RESULTS Synthesis and characterization of the NiFe/NF electrode The electrodeposition of NiFe composites onto NF was undertaken in the electrolyte containing equal molar (3 mM) of nickel (II) and iron (III) nitrates. The deposition potential was controlled at −1.0 V versus Ag/AgCl to reduce NO3− ions at the electrode surface to generate hydroxide ions and increase the pH value (equation (1))29,30. Ni2+ and Fe3+ ions then reacted with local generated hydroxide ions to form bimetallic hydroxide deposits on the surface of electrodes according to equation (2). The electrodeposition process leads to a brown thin film deposited on the NF substrate (Supplementary Fig. 1). Figure 1a shows the scanning electron microscopy (SEM) image of the NiFe/NF composite. The NiFe catalysts are found to be uniformly deposited onto the macroscopic 3D skeleton of NF, resulting in high catalyst loadings as well as large amount of accessible active sites. Figure 1b displays a higher magnification SEM image of the NF surface marked in Fig. 1a. The NiFe deposits show a highly rippled nanosheet structure, which is significantly different from the morphologies of pure NF as well as that obtained when Fe and Ni are deposited individually onto NF (Supplementary Fig. 2). The lateral extension of the nanosheet ranges from 50 nm to several hundred nanometers, and the thickness is generally around 10 nm. The rippled nanosheets are interconnected forming mesoporous NiFe nanostructures, with the pore size around 50 nm. [Figure: Microscopy measurements of the NiFe/NF electrode.(a) SEM image of the NiFe/NF electrode. (b) High resolution SEM image of the area squared in a. (c,d) TEM images of NiFe nanosheets scratched off from the NiFe/NF (the inset shows the corresponding selected area diffraction pattern). Scale bars, 200 μm, 200 nm, 50 nm and 10 nm in a,b,c and d, respectively.] Figure 1c displays the transmission electron microscopy (TEM) image of the NiFe composites carefully scratched off from the NF substrate. The NiFe nanosheet shows a rippled sheet structure with a dimension around 300 nm, in accordance with the SEM results. The nanosheets are highly transparent, indicating they are ultrathin. High-resolution TEM (Fig. 1d) suggests that the as-prepared NiFe nanosheets are amorphous, with no detection of typical lattice fringes for Ni, Fe or NiFe composites. The inset of Fig. 1c is the selected-area electron diffraction pattern of the nanosheet. The pattern shows a broad and diffused halo ring, further confirming that the as-prepared NiFe

Read the complete text