Exciton binding energy of monolayer WS₂.
Zhu B, Chen X, Cui X. · 2015
Read Exciton binding energy of monolayer WS₂. by Zhu B, Chen X, Cui X. (2015) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/europmc-pmc4363839.txt.
Introduction
Bairen Zhu, Xi Chen, and Xiaodong Cui measured a key energy value in an atom-thin material, in Scientific Reports in 2015. Their material was a single layer of tungsten disulfide, part of a family of thin crystals with strong light effects. In such thin layers, electrons and the holes they leave bind tightly into pairs called excitons. How strongly they bind was the open question the team set out to pin down with light-based tests.
Using two light methods, including two-photon excitation scans, the team placed the exciton binding energy at about 0.71 electron volts, with a small stated error range. That is a large share of the material's energy gap, far above what bulk crystals show. Strong binding in such thin layers shapes how they absorb and emit light. The value helps guide work on thin-crystal light devices.
Catalog record
| CREATOR | Zhu B, Chen X, Cui X. |
|---|---|
| YEAR | 2015 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 26 KB |
| LICENSE | CC BY 4.0 |
| RIGHTS | CC BY |
| SOURCE | Europe PMC |
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Exciton Binding Energy of Monolayer WS2 By Bairen Zhu, Xi Chen, Xiaodong Cui Published in: Scientific Reports DOI: 10.1038/srep09218 ABSTRACT Abstract The optical properties of monolayer transition metal dichalcogenides (TMDC) feature prominent excitonic natures. Here we report an experimental approach to measuring the exciton binding energy of monolayer WS2 with linear differential transmission spectroscopy and two-photon photoluminescence excitation spectroscopy (TP-PLE). TP-PLE measurements show the exciton binding energy of 0.71 ± 0.01 eV around K valley in the Brillouin zone. Coulomb interactions are significantly enhanced in low dimensional systems as a result of spatial confinement and reduced Coulomb screening. Consequently, excitons, quasiparticles of electron-hole pairs bounded by Coulomb force, play a pronounced role in their optical aspects. A few paradigms of the pronounced excitonic effects have been demonstrated in quantum dots and carbon nanotubes, where the exciton binding energies are found to be a fraction of their band gaps in these quasi-zero dimensional (0D) and one dimensional (1D) systems1,2,3. Prominent exciton effects are also widely expected in intrinsic 2D systems, for instance, monolayer crystals of transition metal dichalcogenides (TMDCs) owing to the reduced dielectric screening and spatial confinements4,5,6,7,8. Monolayer TMDC is an intrinsic 2D crystal consisting of two hexagonal planes of chalcogen atoms and an intermediate hexagonal plane of metal atoms in a prismatic unit cell. Particularly MX2 (MoS2, MoSe2, WS2 and WSe2) experiences a transition from indirect gap in bulk form to direct gap of visible frequency in monolayer, where the band gap is located at K (K′) valley of the Brillouin zone9,10,11,12. Ab initio calculations show the direct-gap exciton binding energy in the range of 0.5–1 eV, which is around 1/3–1/2 of the corresponding optical direct gap4,5,6,7,8. The modulated absorption/reflection spectroscopy shows the binding energy of direct gap exciton is around 55 meV in bulk crystals13. Such a big exciton binding energy in bulk form guarantees the robust excitonic nature of optical properties in ultrathin counterparts. Furthermore, photoluminescence (PL) experiments identify electron (hole)-bounded excitons, so called trions, with a charging energy EbX− of 18 meV, 30 meV and 20–40 meV in monolayer MoS2, MoSe2 and WS2, respectively14,15,16. With a simple 2D exciton model, one could estimate the exciton binding energy around 10 times that of the trion, if equal effective electron's and hole's mass are assumed17. However, the direct measurement of the exciton binding energy in monolayer TMDC is lacking (After posting of this work, the experimental studies18,19,20,21,22,23,24 on exciton binding energy and exciton excited states in monolayer TMDCs have been reported). Here we report experimental approaches to measuring the exciton binding energy of monolayer WS2 with linear differential transmission spectroscopy and two-photon photoluminescence excitation spectroscopy (TP-PLE). The TP-PLE resolves the excited states of excitons and the interband transition continuum. The exciton binding energy of 0.71 ± 0.01 eV of the band-edge excitons around K valley in the Brillouin zone is extracted by the energy difference between the ground state exciton and the onset of the interband continuum. Monolayer WS2 was mechanically exfoliated from single crystal WS2 and identified with optical microscopes and photoluminescence spectroscopy (supplementary information). The samples in differential transmission measurements were made by transferring from silicon substrates to freshly cleaved mica substrates as described in Ref. 25. All other measurements were performed on WS2 monolayers on silicon substrates with a 300 nm oxide cap layer. The electric-gate dependent PL measurements were conducted with a back-gated field effect transistor structure with Au electrodes. The TP-PLE spectroscopy was undertaken at ambient conditions by deploying a confocal setup with a 20× achromatic objective and a Ti:sapphire oscillator (80 MHz, 100 fs). Figure 1(a) summarizes linear optical measurements of monolayer and multilayer WS2. There are distinct peaks in the differential transmission spectra, labeled as “A”, “B” and “C”, respectively12,13. Peaks “A” around 2.02 eV and “B” around 2.4 eV at room temperature present the excitonic absorptions of the direct gap located at K valley of the Brillouin zone. The separation between “A” and “B” of 0.38 eV rising from the splitting of the valence band minimum (VBM) due to the spin-orbit coupling (SOC) at K (K′) valley is almost constant in all the layers with various thickness, which is consistent with the PL spectra11,12. It is the direct result of the suppression of interlayer coupling at K (K′) valley owing to the giant SOC and spin-valley coupling in tungsten TMDC with 2H stacking order, in which each unit layer is a π rotation of its adjacent layers11. The peak “C” around 2.8 eV was recognized as the excitonic transitions from multiple points near Γ point of the Brillouin zone5,12. Unlike in many semiconductors, the linear absorption spectra of WS2 display no gap between distinct excitons and the continuum of the interband transitions. In addition to the overlap with the higher-energy states (exciton C), the continuous absorption may also originate from the strong electron (hole)-phonon coupling and the superposition of high-energy excited states of excitons (exciton A and exciton B) that fill the gap between the ground state excitons and the interband continuum in the linear absorption spectra5,19. As the temperature drops to 10 K, peak “A” and “B” are both blue-shifted by around 0.1 eV and peak “C” is shifted by 0.06 eV as shown in Figure 1(c). The difference of the blue-shift is the direct consequence of the diverse locations of the excitons in the Brillouin zone: exciton “A” and “B” are formed at K valley while “C” is around Γ point. Nevertheless, the continuous absorption still survives and no distinct single-particle band edge emerges at cryogenic temperature (10 K). It is difficult to resolve the exciton binding energy by the linear absorption spectra owing to the overlap of high-energy excitons (exciton C), the strong electron-phonon coupling and the transfer of the oscillator strength from interband continuum to exciton states. The strong electron-phonon coupling and the transfer of the oscillator strength are the direct consequences of enhanced coulomb interactions in low dimensional materials as reflected in carbon nanotubes2,26. [Figure: The linear absorption spectra of WS2 atomically thin films.(a) Normalized differential transmission spectra of multi- and monolayer WS2 at room temperature and 10 K. (b) Absorbance of atomically thin layer at photon energy of 2.088 eV (orange) and 2.331 eV (green) as indicated by arrows in figure 1(a). The absorbance shows a linearly dependence on layer number, each unit layer with constants of 2.0% and 3.4% respectively. (c) Absorption peak energy values of exciton “A”, “B” and “C”.] Figure 1(b) shows the absorbance of atomically thin WS2 films as a function of the thickness above their ground exciton energy, which is approximated with the differential transmission. The absorbance of monolayers and multilayers is linearly proportional to their thickness, each layer absorbing around 2.0% and 3.4% at excitations of 2.088 eV and 2.331 eV, respectively. The linear layer dependence of the absorption gives an experimental evidence of the suppression of interlayer hopping in 2H stacked WS2 as a result of spin-valley coupling11,27. The thickness dependence could also be used as a thickness monitor for multilayer characterization. There is a side band at the red side of exciton A, which modifies the lineshape away from the symmetric Lorentzian or Gaussian shape. We tentatively attribute the side band to the contribution of electron/hole-bound