Nanoemulsion: an advanced mode of drug delivery system.
Jaiswal M, Dudhe R, Sharma PK. · 2015
Read Nanoemulsion: an advanced mode of drug delivery system. by Jaiswal M, Dudhe R, Sharma PK. (2015) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/europmc-pmc4362737.txt.
Introduction
Manjit Jaiswal, Rupesh Dudhe, and P. K. Sharma reviewed nanoemulsions as a drug delivery method in 3 Biotech in 2015. A nanoemulsion mixes two liquids that do not normally blend, such as oil and water, into one stable system using emulsifying agents. Its droplets are tiny, typically in the range the review gives as 20 to 200 nanometers across. The aim is to carry drug ingredients better than older delivery forms.
The review lays out what nanoemulsions are, how they differ from plain emulsions in droplet size and shape, and how they are made, including high-pressure methods. It covers how such systems are described and tested, and what measures judge their quality. Uses discussed include carrying drugs more effectively while limiting side effects, with roles in infection, cancer, and vaccine work among the areas surveyed.
Catalog record
| CREATOR | Jaiswal M, Dudhe R, Sharma PK. |
|---|---|
| YEAR | 2015 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 19 KB |
| LICENSE | CC BY 4.0 |
| RIGHTS | CC BY |
| SOURCE | Europe PMC |
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Nanoemulsion: an advanced mode of drug delivery system By Manjit Jaiswal, Rupesh Dudhe, P K Sharma Published in: 3 Biotech DOI: 10.1007/s13205-014-0214-0 ABSTRACT Abstract An advanced mode of drug delivery system has been developed to overcome the major drawbacks associated with conventional drug delivery systems. This review gives a detailed idea about a nanoemulsion system. Nanoemulsions are nano-sized emulsions, which are manufactured for improving the delivery of active pharmaceutical ingredients. These are the thermodynamically stable isotropic system in which two immiscible liquids are mixed to form a single phase by means of an emulsifying agent, i.e., surfactant and co-surfactant. The droplet size of nanoemulsion falls typically in the range 20–200 nm. The main difference between emulsion and nanoemulsion lies in the size and shape of particles dispersed in the continuous phase. In this review, the attention is focused to give a basic idea about its formulation, method of preparation, characterization techniques, evaluation parameters, and various applications of nanoemulsion. Keywords: Nanoemulsion, Drug delivery, Emulgents, High-pressure homogenization INTRODUCTION Nanoemulsions are a colloidal particulate system in the submicron size range acting as carriers of drug molecules. Their size varies from 10 to 1,000 nm. These carriers are solid spheres and their surface is amorphous and lipophilic with a negative charge. Magnetic nanoparticles can be used to enhance site specificity. As a drug delivery system they enhance the therapeutic efficacy of the drug and minimize adverse effect and toxic reactions. Major application includes treatment of infection of the reticuloendothelial system (RES), enzyme replacement therapy in the liver, treatment of cancer, and vaccination. An emulsion is a biphasic system in which one phase is intimately dispersed in the other phase in the form of minute droplets ranging in diameter from 0.1 to 100 μm. It is a thermodynamically unstable system, which can be stabilized by the presence of an emulsifying agent (emulgent or emulsifier). The dispersed phase is also known as internal phase or the discontinuous phase while the outer phase is called dispersion medium, external phase or continuous phase. The emulsifying agent is also known as intermediate or interphase. The term ‘nanoemulsion’ also refers to a miniemulsion which is fine oil/water or water/oil dispersion stabilized by an interfacial film of surfactant molecule having droplet size range 20–600 nm. Because of small size, nanoemulsions are transparent. There are three types of nanoemulsion which can be formed: (a) oil in water nanoemulsion in which oil is dispersed in the continuous aqueous phase, (b) water in oil nanoemulsion in which water droplets are dispersed in continuous oil phase, and (c) bi-continuous nanoemulsions. ADVANTAGES OF NANOEMULSION - It may be used as substitute for liposomes and vesicles (Bouchemal et al. 2004a, b). - It improves the bioavailability of drug (Kim et al. 2001; Wagner et al. 1996). - It is non-toxic and non-irritant in nature. - It has improved physical stability. - Nanoemulsions have small-sized droplets having greater surface area providing greater absorption. - It can be formulated in variety of formulations such as foams, creams, liquids, and sprays. - It provides better uptake of oil-soluble supplements in cell culture technology. - It helps to solubilize lipophilic drug. - Helpful in taste masking. - Less amount of energy is required. COMPONENTS OF NANOEMULSION The main components of nanoemulsion are oil, emulsifying agents, and aqueous phases (Gasco et al. 1991; Kriwet and Müller-Goymann 1995; Trotta 1999). Oils can be of any type like castor oil, corn oil, coconut oil, evening primrose oil, linseed oil, mineral oil, olive oil, peanut oil, etc. A mixture of oil and water may yield a crude temporary emulsion, which upon standing, will separate in two distinct phases due to the coalescence of the dispersed globules. Emulgents or emulsifying agents can impart stability to such systems. Emulgents are broadly classified as surfactants like spans and tweens, hydrophilic colloids such as acacia and finely divided solids, e.g., bentonite and veegum. An emulgent, in addition to its emulsifying properties, should be nontoxic and its taste, odour and chemical stability should be compatible with the product. Some of the desirable properties of an emulgent are: (1) it should be able to reduce the surface tension to below 10 dynes/cm, (2) it should be adsorbed rapidly around dispersed phase globule to form a complete and coherent film to prevent coalescence, (3) it should help in building up an adequate zeta potential and viscosity in the system so as to impart optimum stability, and (4) it should be effective in a fairly low concentration. Emulgents form monomolecular, multimolecular or particulate films around the dispersed globules (Sharma and Jain 1985). Monomolecular films Surfactant type of emulgents stabilizes a nanoemulsion by forming a monolayer of adsorbed molecules or ions at the interface reducing interfacial tension. In modern day practice, combination of emulgents is preferred over single emulgent. The combination consists of a predominantly hydrophilic emulgent in the aqueous phase and a hydrophobic agent in the oily phase to form a complex film at the interface. Multimolecular films Hydrated lyophilic colloids form multimolecular films around globules of dispersed oil. Hydrated colloids do not cause any appreciable lowering of surface tension and their ability to form strong, coherent multimolecular films. Their tendency to increase the viscosity of the continuous phase enhances the stability of emulsion. Solid particulate films The emulgents forming particulate films are small solid particles that are wetted to some degree by both aqueous and non-aqueous liquid phases. They are concentrated at the interface where they produce a film around the dispersed globules thus preventing coalescence. FORMULATION ASPECTS AND METHOD OF PREPARATION OF NANOEMULSION Formulation of nanoemulsion includes active drug, additive and emulsifier. The various methods for the preparation of nanoemulsion include two methods: (a) high-energy emulsification and (b) low-energy emulsification. The high-energy emulsification method includes high-energy stirring, ultrasonic emulsification, high-pressure homogenization, microfluidization, and membrane emulsification (Tiwari and Amiji 2006; Perdiguer et al. 1997; Banker et al. 2002). The low-energy emulsification method includes phase inversion temperature, emulsion inversion point, and spontaneous emulsification (Ahuja et al. 2008). Using a combined method, which includes the high-energy and low-energy emulsification, it is possible to prepare reverse nanoemulsion in a highly viscous system. ULTRASONIC EMULSIFICATION Ultrasonic emulsification is very efficient in reducing droplet size. In ultrasonic emulsification, the energy is provided through sonotrodes called as sonicator probe. It contains piezoelectric quartz crystal which can expand and contract in response to alternating electric voltage. As the tip of sonicator contacts the liquid, it produces mechanical vibration and cavitation occurs. Cavitation is the formation and collapse of vapour cavities in liquid. Thus, ultrasound can be directly used to produce emulsion; it is mainly used in laboratories where emulsion droplet size as low as 0.2 micrometer can be obtained. HIGH-PRESSURE HOMOGENIZATION The preparation of nanoemulsion requires high-pressure homogenization. This technique makes use of high-pressure homogenizer/piston homogenizer to produce nanoemulsion of extremely low particle size (up to 1 nm) (Asua 2002; Anton et al. 2008). MICROFLUIDIZATION Microfluidization is a patented mixing technology, which makes use of a device called microfluidizer. This device uses high pressure which forces the drug product through the interaction chamber resulting in a very fine particle of submicron range. The process is repeated several times to obtain a desired particle size to produce uniform nanoemulsion. PHASE