Crystal structure refinement with SHELXL.

Sheldrick GM. · 2015

Read Crystal structure refinement with SHELXL. by Sheldrick GM. (2015) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/europmc-pmc4294323.txt.

Introduction

George M Sheldrick describes the new features added to SHELXL, his long running program for refining crystal structures. The paper appeared in Acta Crystallographica Section C in 2015, and Sheldrick writes as sole author. Refinement adjusts an atomic model against X-ray or neutron data until the two agree, and SHELXL has served that step for decades.

The update gathers changes made since 2008, explained one by one for working crystallographers. Among the tools covered is SHREDCIF, which pulls refinement details out of the standard CIF files that archives require. The paper doubles as a changelog and a short manual for a program most small molecule labs rely on daily.

Catalog record

CREATORSheldrick GM.
YEAR2015
COLLECTIONPAPERS
FORMATTXT
FILE SIZE33 KB
LICENSECC BY 4.0
RIGHTSCC BY
SOURCEEurope PMC

Source: https://europepmc.org/articles/PMC4294323

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Crystal structure refinement with SHELXL By George M Sheldrick Published in: Acta Crystallographica. Section C, Structural Chemistry DOI: 10.1107/S2053229614024218 ABSTRACT New features added to the refinement program SHELXL since 2008 are described and explained. Keywords: SHELXL, crystal structure refinement, X-ray and neutron diffraction, SHREDCIF INTRODUCTION The first version of SHELX dates back to about 1970 and, after extensive testing, it was first released in 1976. Since then the program system has been developed continuously. The early history has been described by Sheldrick (2008 ▶). The present paper is intended to explain the philosophical and crystallographic background to developments between 2008 and 2015 in SHELXL, the program in the SHELX system responsible for crystal structure refinement. Although SHELXL may also be used for the refinement of macromolecular structures against high-resolution data, most of the new developments have concentrated on the refinement of chemical structures, such as those published in Section C of Acta Crystallographica. Readers not familiar with SHELX may find it useful to look at Sheldrick (2008 ▶) before reading this paper. A major change since 2008 is that the distribution is performed via the SHELX homepage (http://shelx.uni-ac.gwdg.de/SHELX/), which also provides a great deal of documentation, tutorials and other useful information. The programs are updated more frequently than in the past and the list of recent changes should be consulted regularly to see if it is necessary to download a new version. The homepage also contains a list of registered users (but not their email addresses); currently there are over 8000 spread over more than 80 countries. SHELX workshops are announced on the homepage, and many of the talks given at these workshops may be downloaded there. SHELXL is compiled with the Intel ifort FORTRAN compiler using the statically linked MKL library, and is available free to academics for the 32- or 64-bit Windows, 32- or 64-bit Linux and 64-bit Mac OS X operating systems. Multithreading is achieved using OpenMP along the lines suggested by Diederichs (2000 ▶), and the program is particularly suitable for multiple-core processors. SHELXL AND CIF FORMAT The importance of depositing crystallographic data Although the IUCr journals have led the way in insisting that experimental crystallographic data should be deposited, several leading chemical journals still only require the deposition of a CIF (Hall et al., 1991 ▶) containing just the results of the crystal structure determination and not the X-ray or neutron reflection data used to determine the structure. In this respect, biological crystallographers are more advanced. The PDB (Protein Data Bank; Berman, 2008 ▶) has required the deposition of reflection data since February 2008 and virtually all journals that report biological crystal structures, including high-profile journals such as Nature and Science, require a PDB ID for the structure. This has already had a considerable impact. For example, it has led to the retraction of several structures in which the data do not support the claim that a particular ligand was bound to a protein. One very recent example of the use of such deposited data (Köpfer et al., 2014 ▶) can be mentioned here, since it involved the use of SHELXL to refine occupancies and obtain standard uncertainties for them. For over 50 years, the accepted model (Hodgkin & Keynes, 1955 ▶) for the potassium channel present in many living systems was that it involved the transport of both potassium ions and water molecules, based on the argument that adjacent binding sites could not be occupied by K+ cations because they would repel one another, and so the intermediate sites must be occupied by water molecules. Several protein crystal structures were refined at modest resolution with alternating potassium ions and water molecules in the channel and appeared to support this model. However, to the authors’ credit, they deposited their reflection data, including the Friedel pairs, although that was not then obligatory. When sophisticated molecular dynamics (MD) calculations showed that only a model with adjacent K+ cations could account, by a sort of knock-on effect, for the very high potassium permeability observed, it was necessary to reinvestigate the structure using the deposited X-ray reflection data. Both the occupancy refinements with SHELXL and the analysis of the anomalous data with SHELXD (Schneider & Sheldrick, 2002 ▶) and ANODE (Thorn & Sheldrick, 2011 ▶) showed conclusively that the four connected potassium sites are almost fully occupied, as predicted by the MD calculations. Archiving crystallographic data To make the deposition and archiving of reflection data as simple as possible, the CIF written by SHELXL now includes the .hkl reflection data file, embedded as CIF text: _shelx_hkl_file ; ... reflection data in SHELX HKLF 2, 3, 4 or 5 format ... ; _shelx_hkl_checksum 12345 The checksum provides a check that the data have not been corrupted accidentally. The .res results file from the refinement and the .fab file (see below), if used in the refinement, are embedded into the CIF in the same way. The SHELX program SHREDCIF may be used to extract these files from the CIF archive and rename the .res file to .ins, for example to perform further refinements with SHELXL. The intention is that such CIFs containing embedded data should become standard for deposition and archiving. It is particularly convenient that only one file is needed. CIF identifiers beginning with _shelx_ are reserved for use by the SHELX programs, but of course other program authors may use a similar construction for embedding the reflection data etc. Users who do not wish to preserve their carefully measured data for posterity in this way have criticized the embedding of the reflection data on the grounds that (a) the resulting CIF is too large for submission with a paper for publication and that (b) certain CIF-processing programs take a long time to read such a CIF and may even choke in the attempt. However, it should be noted that (a) the figures submitted with a paper often involve larger files and (b) SHREDCIF can usually read and dismember such a CIF in less than one second! To generate a CIF without intensity data for other purposes, e.g. for input to a molecular graphics program, the keyword NOHKL may be used in the SHELXL ACTA instruction. It is difficult to understand why several leading chemical journals still only require the deposition of the atom co­ordinates, etc., but not the reflection data, especially now that the Cambridge Structural Database (CSD; Allen, 2002 ▶) accepts the new CIFs and strongly encourages deposition of the reflection data. A simple solution would be for journals to require a confirmation that the full data have been deposited with the CSD (Bruno & Groom, 2014 ▶) or COD (Gražulis et al., 2012 ▶), analogous to the way in which the PDB requires deposition of the structural and reflection data before issuing a PDB ID. Including CIF items at the end of the .hkl file Since SHELX76, the reflection data have been read until a reflection with indices 0,0,0 or a blank line (or card) or the end of the file was encountered. The rest of the file was never read by the SHELX programs. This means that additional data specific to that data set, such as details of the data collection and processing, may conveniently be

Read the complete text