Bone substitutes in orthopaedic surgery: from basic science to clinical practice.

Campana V, Milano G, Pagano E, Barba M, Cicione C, Salonna G, Lattanzi W, Logroscino G. · 2014

Read Bone substitutes in orthopaedic surgery: from basic science to clinical practice. by Campana V, Milano G, Pagano E, Barba M, Cicione C, Salonna G, Lattanzi W, Logroscino G. (2014) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/europmc-pmc4169585.txt.

Introduction

V. Campana, G. Logroscino, and six co-authors reviewed bone substitutes in the Journal of Materials Science: Materials in Medicine in 2014. Surgeons carry out over two million bone grafting operations a year worldwide. A patient's own bone is still the best filler, but taking it causes harm and the supply is small.

The review weighs each class of substitute. Banked human bone works but raises cost and infection worries, and animal bone has given mixed results. Ceramic fillers based on hydroxyapatite and related minerals are widely used and break down safely in the body, though they are weaker than real bone. Growth proteins BMP2 and BMP7 are the only ones approved for human use, for spine work and stubborn leg fractures. Newer injectable cements allow smaller surgical cuts.

Catalog record

CREATORCampana V, Milano G, Pagano E, Barba M, Cicione C, Salonna G, Lattanzi W, Logroscino G.
YEAR2014
COLLECTIONPAPERS
FORMATTXT
FILE SIZE74 KB
LICENSECC BY 4.0
RIGHTSCC BY
SOURCEEurope PMC

Source: https://europepmc.org/articles/PMC4169585

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Bone substitutes in orthopaedic surgery: from basic science to clinical practice By V. Campana, G. Milano, E. Pagano, M. Barba, C. Cicione, G. Salonna, W. Lattanzi, G. Logroscino Published in: Journal of Materials Science. Materials in Medicine DOI: 10.1007/s10856-014-5240-2 ABSTRACT Bone substitutes are being increasingly used in surgery as over two millions bone grafting procedures are performed worldwide per year. Autografts still represent the gold standard for bone substitution, though the morbidity and the inherent limited availability are the main limitations. Allografts, i.e. banked bone, are osteoconductive and weakly osteoinductive, though there are still concerns about the residual infective risks, costs and donor availability issues. As an alternative, xenograft substitutes are cheap, but their use provided contrasting results, so far. Ceramic-based synthetic bone substitutes are alternatively based on hydroxyapatite (HA) and tricalcium phosphates, and are widely used in the clinical practice. Indeed, despite being completely resorbable and weaker than cortical bone, they have exhaustively proved to be effective. Biomimetic HAs are the evolution of traditional HA and contains ions (carbonates, Si, Sr, Fl, Mg) that mimic natural HA (biomimetic HA). Injectable cements represent another evolution, enabling mininvasive techniques. Bone morphogenetic proteins (namely BMP2 and 7) are the only bone inducing growth factors approved for human use in spine surgery and for the treatment of tibial nonunion. Demineralized bone matrix and platelet rich plasma did not prove to be effective and their use as bone substitutes remains controversial. Experimental cell-based approaches are considered the best suitable emerging strategies in several regenerative medicine application, including bone regeneration. In some cases, cells have been used as bioactive vehicles delivering osteoinductive genes locally to achieve bone regeneration. In particular, mesenchymal stem cells have been widely exploited for this purpose, being multipotent cells capable of efficient osteogenic potential. Here we intend to review and update the alternative available techniques used for bone fusion, along with some hints on the advancements achieved through the experimental research in this field. INTRODUCTION Bone substitutes are being increasingly used especially in oncologic surgery, traumatology, revision prosthetic surgery and spine surgery [1]. Bone grafting frequency is indeed the second most frequent tissue transplantation worldwide, coming right after blood transfusion. Over two millions bone grafting procedures are performed every year, with more than 500,000 implanted in the US alone [2–5]. This is due to their ease use and handling, improved safety profiles, intraoperative cost and time advantages, and adaptability to a variety of clinical challenges. The incorporation of a bone graft is defined as the “process of envelopment and interdigitation of the donor bone tissue with new bone deposited by the recipient” [6]. This process follows a typical multistep cascade: initially, the bone graft produces a response leading to the accumulation of inflammatory cells, followed by the chemotaxis of host mesenchymal cells to the graft site. Thereafter, the primitive host cells differentiate into chondroblasts and osteoblasts, a process under the influence of various osteoinductive factors. The additional processes of bone graft revascularization and necrotic graft resorption occur concurrently. Finally, bone production from the osteoblasts onto the graft’s three-dimensional framework occurs, followed by bone remodeling in response to mechanical stress [7, 8]. A bone substitute can be defined as “a synthetic, inorganic or biologically organic combination which can be inserted for the treatment of a bone defect instead of autogenous or allogenous bone” [9]. A wide variety of bone substitutes have been employed over the past 50 years. Bone substitutes can be broadly categorized into bone grafts (autograft, allograft, xenograft), ceramics (hydroxyapatite, TCP, calcium sulphate) and growth factors (DBM, PRP, BMP’S) [10]. The ideal bone substitute should be biocompatible and not evoke any adverse inflammatory response. It should be easily molded into the bone defect within a short setting time. It should be osteoconductive, osteoinductive [11] and resorbable. It should be possibly traceable in vivo; to this aim radiolucency is ideal to allow optimal radiographic assessment. Also, the ideal bone substitute should be thermally nonconductive, sterilizable, and readily available at a reasonable cost [12]. Although autologous bone grafting is still considered the “gold standard” in bony defect repair, the past century has seen significant advances in the development of valid alternatives to natural bone. The latter half of the twentieth century has seen the evolution of the hydroxyapatite and calcium phosphate-based cements and ceramics. Current advances are being made with the development of tissue-engineered products, incorporating growth factors and stem cells. Depending on the type of surgery and on the bone loss, many options are possible. Cortical strut grafts are used were mechanic strength is needed. Spongy bone, often morcelized, is more usefull to fill cavitary bone defects or in spine fusion. Ceramics under granule, blocks, or moldable paste shape are normally used to enhance bone heal, but have poor mechanical qualities and stable hardware fixation is necessary. Growth factors are on the market as moldable paste. BMPs are currently indicated only in tibial non union (BMP-7) and spine surgery (BMP-2). In this report we will review some of the most important biomaterials in each of these categories. BONE GRAFTS Autografts Currently autografts are the “gold standard” in bone substitution [13, 14]. Autologous (or autogenous) bone grafting involves utilizing bone obtained from the same individual receiving the graft [15]. Bone can be harvested from non-essential bones, such as the iliac crest or the fibula (Fig. 1), the chin, the ribs, the mandible and even parts of the skull. Autogenous bone possesses all the properties essential for bone formation: it is osteoconductive and osteoinductive, and it houses growth factors and osteogenic cells with no associated immune or infective-related risks. Autologous bone fracts are slowly replaced by newly formed host bone. The disadvantages of autografts reside in the inherent morbidity: (1) a surgical donor site is required, leading to possible post-operative pain and complications. [16, 17]; (2) a likelihood of blood loss or hematomas, infection, fracture, neurovascular injury, as well as cosmetic deformity, at the explantation site and longer operative time. Fig. 1 a Cortical strut autograft from fibula in a proximal humeral non union treated by ORIF. b One year X-ray control show bone healing and the persistence of the autograft Also, autogenous bone availability in a patient represents a significant limit, especially in pediatric patients and in the elderly. An autograft may also be performed without a solid bony structure, for example using bone reamed from the anterior superior iliac spine. In this case there is an osteoinductive and osteogenic action, however there is no mechanical support action, as there is no solid bony structure [18]. Allografts Allograft biobanked bone represents a suitable alternative to autogenous bone, being derived from humans as well. Allograft bone can be collected from either living donors (patients total hip replacement surgery) or nonliving donors and must be processed within a bone tissue bank (Fig. 2). Bone Tissue Banks fastly grew up since the’80 years but doubts and concerns arise about costs and problems related to storing [19]. Fig. 2 a, b Morcelized homologous bone graft obtained from a banked femoral head. c Severe acetabular bone loss in a mobilized hip revision cup. d X-ray control at 2 years with evidence of bony stable osseointegration of the new cup in the remodeled bone graft Donor bone is

Read the complete text