ColonyArea: an ImageJ plugin to automatically quantify colony formation in clonogenic assays.
Guzmán C, Bagga M, Kaur A, Westermarck J, Abankwa D. · 2014
Read ColonyArea: an ImageJ plugin to automatically quantify colony formation in clonogenic assays. by Guzmán C, Bagga M, Kaur A, Westermarck J, Abankwa D. (2014) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/europmc-pmc3960247.txt.
Introduction
Camilo Guzmán and four colleagues present ColonyArea in PLoS ONE in 2014. ColonyArea is a free plugin for ImageJ, an image analysis program. Its task is the colony formation assay. That assay is a cancer lab staple. Cells get radiation or a drug dose. The colonies that survive show how well the dose worked. Counting colonies by hand is slow. Counts also vary between labs.
ColonyArea works from photos of whole plates. It splits the image well by well. It cleans and crops each well on its own. Then it measures how much of the well the colonies cover. Stain strength counts too, as a sign of cell density. The authors show these measures track hand counts well. They work across plates with 6 to 24 wells. Labs gain a fast, shared way to score survival assays.
Catalog record
| CREATOR | Guzmán C, Bagga M, Kaur A, Westermarck J, Abankwa D. |
|---|---|
| YEAR | 2014 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 39 KB |
| LICENSE | CC BY 4.0 |
| RIGHTS | CC BY |
| SOURCE | Europe PMC |
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
ColonyArea: An ImageJ Plugin to Automatically Quantify Colony Formation in Clonogenic Assays By Camilo Guzmán, Manish Bagga, Amanpreet Kaur, Jukka Westermarck, Daniel Abankwa, Rossella Rota Published in: PLoS ONE DOI: 10.1371/journal.pone.0092444 ABSTRACT The clonogenic or colony formation assay is a widely used method to study the number and size of cancer cell colonies that remain after irradiation or cytotoxic agent administration and serves as a measure for the anti-proliferative effect of these treatments. Alternatively, this assay is used to quantitate the transforming potential of cancer associated genes and chemical agents. Therefore, there is a need for a simplified and standardized analysis of colony formation assays for both routine laboratory use and for parallelized automated analysis. Here we describe the freely available ImageJ-plugin “ColonyArea”, which is optimized for rapid and quantitative analysis of focus formation assays conducted in 6- to 24-well dishes. ColonyArea processes image data of multi-well dishes, by separating, concentrically cropping and background correcting well images individually, before colony formation is quantitated. Instead of counting the number of colonies, ColonyArea determines the percentage of area covered by crystal violet stained cell colonies, also taking the intensity of the staining and therefore cell density into account. We demonstrate that these parameters alone or in combination allow for robust quantification of IC50 values of the cytotoxic effect of two staurosporines, UCN-01 and staurosporine (STS) on human glioblastoma cells (T98G). The relation between the potencies of the two compounds compared very well with that obtained from an absorbance based method to quantify colony growth and to published data. The ColonyArea ImageJ plugin provides a simple and efficient analysis routine to quantitate assay data of one of the most commonly used cellular assays. The bundle is freely available for download as supporting information. We expect that ColonyArea will be of broad utility for cancer biologists, as well as clinical radiation scientists. INTRODUCTION Since the introduction of clonogenic assays in 1956 by Puck and Marcus [1], they have become the method of choice to determine the survival and growth of cells, in particular cancer cell lines, after treatment with ionizing radiation or to determine the effectiveness of cytotoxic agents [2]–[4]. A clonogenic assay evaluates the potential of a single cell to resist treatments and grow into a colony, which lent the assay the alternative name of colony formation assay [3]. In addition, the colony formation assay has also gained significance to evaluate the transforming or colony growth potential of oncogenes, such as H-ras or CIP2A [5]–[7]. Traditionally clonogenic assays have been performed by counting colonies or foci of cells, which typically comprised >50 densely-packed cells [1], [3]. Cells are usually identified by staining with a crystal violet dye [3], which primarily binds to polyanionic sugar molecules such as DNA in the nucleus of mammalian cells [8]. If solubilized from stained cells, measuring the absorption of the crystal violet dye can be used to quantify cellular growth [9], however with the disadvantage that the cellular sample is destroyed. Colony counting can be done either with the slow and subjective, manual (human) counting or using a large variety of devices and programs that accelerate and automate counting [2], [4], [10]–[13]. The major image analysis challenges are the identification and separation of colonies, as well as integration of the sizes of colonies. Colony number and size would reflect cell survival and proliferation, respectively. Image analysis may require expensive equipment (e.g. GelCount hardware described in [10]), or the use of commercialized software (ScanCount, [2] and MetaMorph, [11]). Alternatively, free distribution software can be employed, either as standalone solutions (CellProfiler, [12] and OpenCFU, [13]) or as macros for ImageJ (National Institutes of Health, Bethesda MD – USA) [4]. As an alternative to counting and quantifying individual colonies, it is much simpler to determine the percentage of the well area that is covered by colonies (colony area percentage) to quantify clonogenic cell growth [7], [14]–[17]. We here describe the ImageJ plugin, “ColonyArea”, which determines the colony area percentage and an intensity weighted colony area percentage (colony intensity percentage) from flatbed scanner acquired images of colony formation assays conducted in multi-well plates. The plugin is user-friendly, as it basically only requires 1) the selection of a rectangular ROI (region of interest) that encompasses wells to be analyzed, and 2) choice of the well-plate type by the user. We test our plugin by quantifying the susceptibility of T98G human glioblastoma cell growth to two different staurosporines, UCN-01 and staurosporine (STS), both well known inhibitors of protein kinases and prominent anti-proliferative drugs [18]–[21]. We validate the accuracy of our results by recovering the different potencies of UCN-01 and STS, as well as by direct comparison of obtained data with data generated by the absorption based method from Kueng et al. [9]. RESULTS AND DISCUSSION We have developed “ColonyArea”, a java-based free distribution plugin for the open-source image analysis software ImageJ. ColonyArea precisely and rapidly quantifies scanned images of colony formation assays ( Figure 1 ). It is already set up to operate on standard 6-, 12- and 24-well cell culture plates, and can be further customized to handle other multi-well formats. In the following, we describe how the plugin automatically separates all user-selected wells in an image, eliminates the background and quantifies colony formation. [Figure: Flow chart of the processing steps in the ColonyArea plugin.Steps performed by the user are represented by ovals and the grey shapes are those requiring user input. All other shapes represent steps performed by the three macros Colony_area (rounded rectangles), Colony_thresholder (hexagons) and Colony_measurer (stars) that are packaged as one plugin file.] An additional file placed as Information S1 and termed ‘ColonyArea.zip’, contains the plugin and user manual. This file is also freely available on our website http://www.btk.fi/research/research-groups/abankwa/downloads/ and on the webpage of the European Data Infrastructure (EUDAT) https://b2share.eudat.eu/record/45 through their service B2SHARE. Automatic well separation and cropping The ColonyArea plugin consists of a bundle of the actual java-file and macros. For simplicity we refer to this bundle as the ‘plugin’. The plugin procedure uses a scanned image of a multi-well assay plate ( Figure 2A ) and after separating individual wells performs all processing and analysis steps well-specifically, for example background thresholding. In order to separate the wells from a plate image, the java file “Colony_area” starts by using information about the plate type and the number of selected wells, which are both provided by the user to create a mask that will set the intensity of those pixels belonging to the space in between wells to zero. The size and shape of the mask depend on the above user information and typical plate dimensions of 6- to 24-well plates. Dimensions as published by a major manufacturer (CELLSTAR, Greiner Bio-One) are stored in the plugin. Manual comparison with plates from Millipore and BD Biosciences gave similar dimensions. However, it is possible that the user provides these dimensions, as detailed in the manual. Next this image is converted into a grey scale 8-bit image ( Figure 2B ). To circumvent issues associated with cell growth abnormalities on the well edges, these are eliminated from analysis using a concentrical cropping mask, which reduces each well diameter by 5% from the edges. Subsequently, the macro separates and further crops each