Long-term sorption of metals is similar among plastic types: implications for plastic debris in aquatic environments.

Rochman CM, Hentschel BT, Teh SJ. · 2014

Read Long-term sorption of metals is similar among plastic types: implications for plastic debris in aquatic environments. by Rochman CM, Hentschel BT, Teh SJ. (2014) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/europmc-pmc3893203.txt.

Introduction

Chelsea M. Rochman, Brian T. Hentschel, and Swee J. Teh test plastic and metals in sea water in PLoS One, with the record dated 2014. Plastic trash litters the oceans, and worry grows that it soaks up pollutants. The team ask whether some plastic types soak up far more metal than others.

Pellets of five common plastics sat in San Diego Bay for a full year, with metal checks at set points. All five types gathered much the same metal loads over time. One type did run lower at some checks. Metal loads kept rising across the year, and several metals had not topped out by the end. The results warn that any plastic debris can become a long-term metal carrier in the sea.

Catalog record

CREATORRochman CM, Hentschel BT, Teh SJ.
YEAR2014
COLLECTIONPAPERS
FORMATTXT
FILE SIZE69 KB
LICENSECC BY 4.0
RIGHTSCC BY
SOURCEEurope PMC

Source: https://europepmc.org/articles/PMC3893203

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Long-Term Sorption of Metals Is Similar among Plastic Types: Implications for Plastic Debris in Aquatic Environments By Chelsea M Rochman, Brian T Hentschel, Swee J Teh, James P Meador Published in: PLoS ONE DOI: 10.1371/journal.pone.0085433 ABSTRACT Abstract Concerns regarding plastic debris and its ability to accumulate large concentrations of priority pollutants in the aquatic environment led us to quantify relationships between different types of mass-produced plastic and metals in seawater. At three locations in San Diego Bay, we measured the accumulation of nine targeted metals (aluminum, chromium, manganese, iron, cobalt, nickel, zinc, cadmium and lead) sampling at 1, 3, 6, 9 and 12 months, to five plastic types: polyethylene terephthalate (PET), high-density polyethylene (HDPE), polyvinyl chloride (PVC), low-density polyethylene (LDPE), and polypropylene (PP). Accumulation patterns were not consistent over space and time, and in general all types of plastic tended to accumulate similar concentrations of metals. When we did observe significant differences among concentrations of metals at a single sampling period or location in San Diego Bay, we found that HDPE typically accumulated lesser concentrations of metals than the other four polymers. Furthermore, over the 12-month study period, concentrations of all metals increased over time, and chromium, manganese, cobalt, nickel, zinc and lead did not reach saturation on at least one plastic type during the entire 12-month exposure. This suggests that plastic debris may accumulate greater concentrations of metals the longer it remains at sea. Overall, our work shows that a complex mixture of metals, including those listed as priority pollutants by the US EPA (Cd, Ni, Zn and Pb), can be found on plastic debris composed of various plastic types. INTRODUCTION Plastic debris litters the aquatic environment globally [1], [2], contaminating a diversity of habitats and organisms. For example, coral reefs [3] and salt marshes [4] can be smothered and/or entangled by plastic debris, and animals from all seven species of seaturtles and 45% of all species of marine mammals have been found with plastic in their digestive tracts [5]. The physical hazards of plastic debris to organisms include ingestion, entanglement and smothering [6], [7]. The chemical effects associated with the ingestion or bioconcentration of plastic debris have received less attention, despite the ingestion of plastic by hundreds of species [5]. Plastic debris is associated with a “cocktail of contaminants” made up of chemical ingredients in the plastic and chemical pollutants sorbed to the plastic from the environment [8], including 78% of chemicals listed as ‘priority pollutants’ (chemicals prioritized by the US EPA because they have been found to be bioaccumulative, persistent and/or toxic; [9]). Greater than half of polymers produced include chemical ingredients considered hazardous by the UN's Globally Harmonized System [10]. Moreover, when discarded into aquatic environments, plastic debris sorbs chemical contaminants from surrounding water (some up to 100 × that of sediments [11]), including organic chemicals that are persistent, bioaccumulative and toxic (PBTs [12], [13]) and metals [14], [15]. Thus, plastic debris potentially acts as a multiple stressor to organisms [8], inflicting both physical and chemical adverse effects to animals upon ingestion. As such, efforts to manage plastic debris should understand the complex mixture of contaminants associated with this material when its fate is the aquatic environment. The presence of organic chemical pollutants on plastic debris is established globally [12], [16], [17], but the presence of metals on plastic debris has only recently been studied [14], [15], [18]. Like many chemical pollutants (e.g. polybrominated diphenyl ethers [19]), some metals found on plastic debris (e.g., lead; [18]) derive from the manufacturing process and from environmental sorption [14], [15]. But, like several organic chemical pollutants (e.g. DDT [12]), several metals are found on plastic debris solely as a result of environmental sorption [14], [15]. Environmental accumulation may have been expected, as the surfaces of plastic containers are known to accumulate metals from water samples [20], [21], [22]. To investigate this further, a recent study deployed virgin pellets of polyethylene in an urban harbor for 8 weeks and found several metals, as well as organic and inorganic precipitates on the weathered surfaces of pellets, but the time course of metal accumulation was not measured [14]. Unexpectedly, analysis of individual polyethylene resin pellets collected from beaches in southwest England contained similar concentrations of metals as local sediment—which is striking because sediment generally has a much greater surface area [15]. Chemical ingredients in plastics from manufacturing (e.g., catalysts, fillers, plasticizers) [22] and degradation and fouling of aquatic plastic debris via microbial biofilms and colonization by algae and invertebrates [15], [23] may generate active sites for the sorption and/or bioaccumulation of metals. Plastic debris is composed of several different polymers, and their unique chemical ingredients may make some types of plastic more hazardous than others when their chemical constituents are bioavailable to organisms. For example, polyvinyl chloride (PVC), polycarbonate, polyurethane and polystyrene (PS) are composed of hazardous monomers (e.g., vinyl chloride, bisphenol-A and styrene) and/or contain hazardous additives (e.g. PBDEs, phthalates and lead) [9]. For other plastics, their chemical properties may facilitate sorption of large concentrations of contaminants, enhancing their toxicity. For example, polyethylene and polypropylene (PP) sorb an order of magnitude greater concentration of polychlorinated biphenyls (PCBs) than polyethylene terephthalate (PET) and PVC [13]. Moreover, concentrations of hazardous chemicals may vary based on the location where the material is discarded and the time it is left in the aquatic environment. Plastics recovered from locations with greater chemical contamination have greater concentrations of chemicals sorbed to them [12], [13]. Over time, plastics degrade and foul with life [24], [25], increasing the surface area and changing the surface properties, allowing concentrations of chemical contaminants to increase over time [13], [15], [26] via sorption and/or bioaccumulation by biofilms. Thus, assessing the hazards associated with plastic in aquatic habitats requires knowledge of the types of polymers comprising the debris, the length of time the debris was present in the aquatic environment (affecting the size, shape and fouling) and the locations and transport of the debris during that time period. Plastic pre-production pellets, a recognizable component of marine debris, have been used to establish a global association between organic contaminants and plastic discarded at sea [12]. Here, we assess the accumulation of inorganic contaminants (i.e. metals) to plastic pellets. The physical and chemical properties of each type of plastic (e.g. surface area [11], diffusivity [26] [27] [28] [29] and crystallinity [26] [29]) influence the sorption of chemicals to plastic debris [27] [28]. Thus, we deployed different types of plastic pre-production pellets in an urban bay to measure how the accumulation of various metals varies among different types of plastic in the marine environment. We aimed to measure the concentrations of pollutants over a 12-month period, and achieved this by deploying five of the most common types of mass-produced pre-production plastic pellets [30] at multiple locations in an urban bay. Laboratory experiments accurately apply a dose of contaminants to polymers and hold many confounding variables constant (e.g. controlling for temperature and fouling). In contrast, our field experiment incorporated environmentally relevant factors and allowed the polymers to be exposed to in situ variations in all variables relevant at our field sites, including fluctuating in situ concentrations of metals and the growth of biofilms. Our previous work showed that

Read the complete text