MEDIPS: genome-wide differential coverage analysis of sequencing data derived from DNA enrichment experiments.

Lienhard M, Grimm C, Morkel M, Herwig R, Chavez L. · 2014

Read MEDIPS: genome-wide differential coverage analysis of sequencing data derived from DNA enrichment experiments. by Lienhard M, Grimm C, Morkel M, Herwig R, Chavez L. (2014) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/europmc-pmc3892689.txt.

Introduction

Matthias Lienhard, Christina Grimm, Markus Morkel, Ralf Herwig, and Lukas Chavez present a software update in Bioinformatics, with the record dated 2014. Enriching DNA for a trait or mark, then sequencing it, is a core lab method for epigenetic study. Comparing read coverage between groups is the shared core task.

Their package, MEDIPS, now handles any number of samples per group, from a few to the hundreds that wide association studies bring. Fresh statistical tests spot coverage gaps between conditions with more power. New tools check how alike samples are and label genome regions from public databases. The free package runs inside the R and Bioconductor systems that many labs already use, and aims to make such comparisons fast and simple.

Catalog record

CREATORLienhard M, Grimm C, Morkel M, Herwig R, Chavez L.
YEAR2014
COLLECTIONPAPERS
FORMATTXT
FILE SIZE11 KB
LICENSECC BY 4.0
RIGHTSCC BY
SOURCEEurope PMC

Source: https://europepmc.org/articles/PMC3892689

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

MEDIPS: genome-wide differential coverage analysis of sequencing data derived from DNA enrichment experiments By Matthias Lienhard, Christina Grimm, Markus Morkel, Ralf Herwig, Lukas Chavez Published in: Bioinformatics DOI: 10.1093/bioinformatics/btt650 ABSTRACT Motivation: DNA enrichment followed by sequencing is a versatile tool in molecular biology, with a wide variety of applications including genome-wide analysis of epigenetic marks and mechanisms. A common requirement of these diverse applications is a comparison of read coverage between experimental conditions. The amount of samples generated for such comparisons ranges from few replicates to hundreds of samples per condition for epigenome-wide association studies. Consequently, there is an urgent need for software that allows for fast and simple processing and comparison of sequencing data derived from enriched DNA. Results: Here, we present a major update of the R/Bioconductor package MEDIPS, which allows for an arbitrary number of replicates per group and integrates sophisticated statistical methods for the detection of differential coverage between experimental conditions. Our approach can be applied to a diversity of quantitative sequencing data. In addition, our update adds novel functionality to MEDIPS, including correlation analysis between samples, and takes advantage of Bioconductor’s annotation databases to facilitate annotation of specific genomic regions. Availability and implementation: The latest version of MEDIPS is available as version 1.12.0 and part of Bioconductor 2.13. The package comes with a manual containing detailed description of its functionality and is available at http://www.bioconductor.org. Contact: [email protected] Supplementary information: Supplementary data are available at Bioinformatics online. 1 INTRODUCTION DNA enrichment methods are widely used for genome-wide identification of many different kinds of epigenetic marks. These techniques include chromatin-immunoprecipitation for localizing transcription factor binding sites or for revealing the genomic distribution of different histone modifications. Methylated DNA Immuno-Precipitation (MeDIP) (Weber et al., 2005) and methyl-CpG binding domain (MBD) protein capture (Serre et al., 2010) are similar techniques, but target the enrichment of DNA fragments containing methylated cytosines. Similarly, 5-hydroxymethylcytosines can be detected by antiserum specific to cytosine-5-hydroxymethylenesulfate (CMS) after treatment with sodium bisulfite (Pastor et al., 2011). It can be expected that further affinity methods will be developed for immunoprecipitation (IP) of known or novel kinds of epigenetic marks. To provide a general framework for efficient genome-wide differential coverage analysis of IP-sequencing data, we have improved the user-friendly MEDIPS package. In contrast to the previous version, the MEDIPS update is capable of processing an arbitrary number of replicates or samples per condition. Furthermore, MEDIPS now integrates an elaborated statistical framework developed for the digital nature of count data, which includes a model for biological variation across replicates (Robinson et al., 2010a), and has greatly reduced runtime and memory requirements. 2 MEDIPS WORK FLOW The MEDIPS package provides functions for the quality control and analysis of data derived from IP-seq samples. It starts with the aligned reads (typically bam files) and can be used for any genome of interest. Figure 1 gives an overview of a typical work flow. Fig. 1.The MEDIPS work flow 2.1 Preparation In the first step, the alignment files (single- or paired-end) are imported, and the fragments overlapping previously specified genomic regions are counted. These regions can be either genome-wide windows of regular width or any given regions of interest. To control for polymerase chain reaction artifacts, MEDIPS optionally replaces reads with the same position and orientation by one representative. 2.2 Quality control The saturation analysis helps to verify whether the given set of mapped reads is sufficient to generate a saturated and reproducible coverage profile of the reference genome. This is done by extrapolation of the correlation of subsets (see Fig. 1C). To assess the effectiveness of the MeDIP/MBD enrichment, a function to calculate overall CpG enrichment is provided. MEDIPS identifies the fraction of CpGs in the reference genome covered by the sequencing data and evaluates their depth of coverage. 2.3 CpG density normalization It has been reported by Down et al. (2008) that methylation levels obtained from MeDIP/MBD experiments and bisulfite sequencing cannot be compared directly. Therefore, MEDIPS maintains its normalization function based on the concept of CpG coupling analysis (Down et al., 2008) to calculate the relative methylation score (see Fig. 1D and E). It has been shown by Chavez et al. (2010) that this normalization can improve the correlation to bisulfite data. 2.4 Differential coverage analysis The main task for comparative epigenetic analyses is detection of regions with differential coverage between conditions. Variability, which can emerge from technical and biological variation, has to be estimated and modeled, and the statistical test has to consider the discrete nature of the count values. For this purpose, we make use of the edgeR package, which has been developed in the context of RNA-seq by Robinson et al. (2010a). It provides functions to estimate the biological variability from low number of replicates and models the count data using negative binomial distribution. Alteration in copy number (CNA) are known to locally influence the MeDIP signal (Robinson et al., 2010b). To control for this interference, alterations in copy number are evaluated and can be considered in further analysis. To help with the functional interpretation of genomic regions identified by the differential coverage analysis, MEDIPS provides the functionality to annotate these regions with any provided set of annotations. The features can be imported from custom files, or from online databases, accessible from Bioconductor. 3 APPLICATION To demonstrate the functionality of the MEDIPS package, we processed recently published MeDIP-seq data (Grimm et al., 2013) that was generated to assess genome-wide epigenetic changes in mouse intestinal adenoma. For this study, differential methylation was inferred for the sample groups by calculating Wilcoxon rank tests for the normalized count values (reads per million, rpm) of each window. Differentially methylated regions (DMRs) were determined by applying filters for P-values, minimal coverage and ratios (Grimm et al., 2013). Here, we process the same data but by using the presented MEDIPS package version 1.12.0. The commented R script, showing the function calls of this analysis, can be found in the Supplementary Material. From the five adenoma and seven normal control mouse samples, 14–22 M MeDIP-seq reads were uniquely mapped to the mouse reference genome (NCBI37/mm9) using bowtie (Langmead et al., 2009), of which ∼93% remain after replacing reads with the same position and orientation by one representative. The saturation analysis indicates sufficient sequencing depth, and the CpG coverage indicates an effective MeDIP enrichment (see Fig. 1C and Supplementary Figs S1 and S2). Comparison of the normalized relative methylation score values with bisulfite validation showed a good overall correlation of 0.69–0.79 with a set of bisulfite validation assays previously performed by Grimm et al. (2013) on the same genomic samples (see Fig. 1E and Supplementary Fig. S3). The edgeR test for differentially methylated regions finds 51.722 DMRs (P < 0.01), which correspond to 0.5% of the genome. Correction for multiple testing leads to 110 regions at 10% false discovery rate (FDR). Figure 1F shows the methylation logFC versus average log methylation (MA-plot). DMRs are depicted as orange points (P < 0.01) and red crosses (FDR<0.1). The result table containing the DMRs can be found in Supplementary Table S1. About 60% of the DMRs identified by Grimm et al. (2013) overlap with the DMRs identified by MEDIPS 1.12. A detailed comparison between the two approaches

Read the complete text