The one hour yeast proteome.

Hebert AS, Richards AL, Bailey DJ, Ulbrich A, Coughlin EE, Westphall MS, Coon JJ. · 2014

Read The one hour yeast proteome. by Hebert AS, Richards AL, Bailey DJ, Ulbrich A, Coughlin EE, Westphall MS, Coon JJ. (2014) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/europmc-pmc3879625.txt.

Introduction

Alexander S. Hebert and a team of co-authors report a speed feat in Molecular & Cellular Proteomics, with the record dated 2014. Their title says it in full: the one hour yeast proteome. Reading all of a cell's proteins used to take days of machine time.

Better sample prep, faster liquid sorting, and a new hybrid mass spectrometer did the trick. The machine scans at great speed and catches many peptide pieces per second. In a run of just over an hour it matched tens of thousands of peptides and named near four thousand yeast proteins, at a strict error bar. The team argue that faster scans could soon bring full human protein reads down to a few hours, a shift for drug and disease work.

Catalog record

CREATORHebert AS, Richards AL, Bailey DJ, Ulbrich A, Coughlin EE, Westphall MS, Coon JJ.
YEAR2014
COLLECTIONPAPERS
FORMATTXT
FILE SIZE42 KB
LICENSECC BY 4.0
RIGHTSCC BY
SOURCEEurope PMC

Source: https://europepmc.org/articles/PMC3879625

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

The One Hour Yeast Proteome* By Alexander S. Hebert, Alicia L. Richards, Derek J. Bailey, Arne Ulbrich, Emma E. Coughlin, Michael S. Westphall, Joshua J. Coon Published in: Molecular & Cellular Proteomics : MCP DOI: 10.1074/mcp.M113.034769 ABSTRACT We describe the comprehensive analysis of the yeast proteome in just over one hour of optimized analysis. We achieve this expedited proteome characterization with improved sample preparation, chromatographic separations, and by using a new Orbitrap hybrid mass spectrometer equipped with a mass filter, a collision cell, a high-field Orbitrap analyzer, and, finally, a dual cell linear ion trap analyzer (Q-OT-qIT, Orbitrap Fusion). This system offers high MS2 acquisition speed of 20 Hz and detects up to 19 peptide sequences within a single second of operation. Over a 1.3 h chromatographic method, the Q-OT-qIT hybrid collected an average of 13,447 MS1 and 80,460 MS2 scans (per run) to produce 43,400 (x̄) peptide spectral matches and 34,255 (x̄) peptides with unique amino acid sequences (1% false discovery rate (FDR)). On average, each one hour analysis achieved detection of 3,977 proteins (1% FDR). We conclude that further improvements in mass spectrometer scan rate could render comprehensive analysis of the human proteome within a few hours. The ability to measure differences in protein expression has become key to understanding biological phenomena (1, 2). Owing to cost, speed, and accessibility, transcriptomic analysis is often used as a proteomic proxy (3, 4). That said, mRNA is a genetic intermediary and cannot inform on the myriad of post-translational regulation processes (5–7). For the past decade considerable effort has been invested in maturing proteomic technology to deliver information at a rate and cost commensurate to transcriptomic technologies. Historically yeast, with its 6600 open reading frames, has been the preferred proteomic technology test-bed (8). In 2003, Weissmann and colleagues measured approximate expression levels of each yeast gene using either GFP or TAP tags (9). This seminal work established that ∼4500 proteins are expressed during log-phase yeast growth. Subsequent mass spectrometry-based studies have confirmed this early estimate (9–12). With this knowledge, we hereby define comprehensive proteome analysis as an experiment that detects ∼90% of the expressed proteome (≥ 4000 proteins for yeast). Note others have used the term “nearly complete” for this purpose; we posit that comprehensive has identical meaning (i.e. including many, most, or all things) (13). Initial MS-based proteomic analyses of yeast, each identifying up to a few hundred proteins, were conducted using a variety of separation and MS technologies (14–16). Yates and co-workers reported the first large-scale yeast proteome study in 2001 with the identification of 1483 proteins following ∼ 68 h of mass spectral analysis, i.e. 0.4 proteins were identified per minute (17). Their method—two dimensional chromatography coupled with tandem mass spectrometry—has provided a template for large-scale protein analysis for the past decade (18–20). By incorporating an offline first dimension of separation with more extensive fractionation (80 versus 15) Gygi et al. expanded on this work in 2003 (21). That said, the modest increase in identified proteins (1504) required 135 h of analysis, reducing the protein per minute count to 0.2. Armed with a faster hybrid mass spectrometer capable of accurate mass measurement, Mann and colleagues achieved detection of 2003 yeast proteins in an impressive 48 h (0.7 proteins/minute) in 2006 (22). From these three pioneering studies we begin to see the impact of mass spectrometer acquisition rate on the depth and rate of proteome analysis. The most recent application of such technology to the yeast proteome, however, The Mann work used a hybrid linear ion trap-ion cyclotron resonance Fourier transform instrument (LTQ-FT) that delivered MS2 scans at a rate of ∼650 ms (23). The earlier studies, i.e. Yates and Gygi, relied on the considerably slower scanning (1–3 s/scan) three-dimensional ion trap technology. In 2008, using the novel Orbitrap hybrid mass spectrometer, Mann and colleagues reported on the first comprehensive analysis of the yeast proteome by identifying nearly 4000 proteins (10). Extensive fractionation (24) and triplicate analysis of each fraction rendered the study a considerable time investment at ∼144 analysis hours (0.5 proteins/minute). In 2010 our group achieved similar comprehensive analysis, but improved sequence coverage, using fractionation and multiple proteases (24). That work, however, required even longer analysis time (0.2 proteins/min). And that was the state-of-the-art as recently as three years ago. Doubtless we, the proteomics community, had achieved one momentous goal—comprehensive coverage of the yeast proteome. Still, obtaining this depth was not routine as it mandated days of MS analysis and a considerable amount of expert labor. In 2012, with new, even faster scanning, quadrupole-Orbitrap technology (Q-OT, Q-Exactive), Mann and colleagues dispatched the concept of fractionation, improved the quality of sample preparation, and placed emphasis on higher quality online separations (25). With their streamlined method they achieved detection of just over 3900 yeast proteins following four hours of MS analysis. Even more impressive this strategy translated to the identification of 16.3 proteins per minute—a 33-fold improvement over the next best comprehensive study. This success was a remarkable achievement and illustrates that comprehensive proteomic technology can indeed be executed in a time efficient manner. Time-of-flight hybrid systems, of course, can deliver very high MS2 acquisition rates, up to 100 Hz in some reports. In 2011, Muddiman and colleagues reported yeast proteome analysis using a quadrupole-TOF system (i.e. TripleTOF) operating at a much lower rate (20 Hz) MS2 scan rate (26). Even at this reduced rate, only 16% of the spectra were mapped to unique sequences and 1112 unique proteins identified. Because of reduced MS2 spectral quality (i.e. low signal-to-noise, S/N), even fewer unique peptide identifications were achieved at higher MS2 acquisition rates. Other studies using TOF technologies report similar results (27, 28). For maximal proteome depth, we conclude that increased scan speed must not come at the cost of reduced spectral quality. Recently, a new Orbitrap hybrid mass spectrometer having a mass filter, a collision cell, a high-field Orbitrap analyzer, and, finally, a dual cell linear ion trap analyzer was described (Q-OT-qIT, Orbitrap Fusion) (29, 30). This system offers high MS2 acquisition speed of 20 Hz—double that of the Q-OT system used by Mann and colleagues. We postulated that this fresh system, with its fast scan rate, could provide comprehensive proteome analysis in record time. To maximize performance we developed an optimized cellular lysis approach, employed trypsin digestion, and used dimethyl sulfoxide (DMSO, 5%) as an LC additive to increase abundance of acidic peptides and unify charge state (31, 32). Using this novel system we report the comprehensive analysis of the yeast proteome (4002 with 1% FDR) following 1.3 h of nLC-MS2 analysis (70 min gradient). These experiments delivered an extraordinary 67 proteins per minute and demonstrate that complete analysis of the yeast proteome can be routinely performed in approximately one hour. EXPERIMENTAL PROCEDURES Yeast Culture and Lysis Saccharomyces cerevisiae strain BY4741 was grown in yeast extract peptone dextrose media (1% yeast extract, 2% peptone, 2% dextrose). Four liters of media was divided between four two-liter flasks and inoculated with a starter culture (OD600 = 2.58). Cells were allowed to propagate for ∼12 generations (20 h) to an OD600 ∼2 (average of 2.18). The cells were harvested by centrifugation at 5000 rpm for 5 min, supernatant decanted, resuspended in

Read the complete text