On the definition of signal-to-noise ratio and contrast-to-noise ratio for FMRI data.
Welvaert M, Rosseel Y. · 2013
Read On the definition of signal-to-noise ratio and contrast-to-noise ratio for FMRI data. by Welvaert M, Rosseel Y. (2013) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/europmc-pmc3819355.txt.
Introduction
Marijke Welvaert, Yves Rosseel, and Essa Yacoub tackle a methods muddle in PLoS One in 2013. Their topic is the signal-to-noise ratio in fMRI, a brain scan method that tracks small shifts in blood flow. Unlike plain MRI, fMRI has no single agreed way to define that ratio.
Each lab's own definition puts values on a new scale, so numbers from two studies often cannot be compared. The authors list the definitions in use and sort how they relate. They also test how each one links to the power to spot true brain activity. Tables and change formulas let readers convert values between scales. The goal is cleaner cross-study talk in a field built on weak signals.
Catalog record
| CREATOR | Welvaert M, Rosseel Y. |
|---|---|
| YEAR | 2013 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 41 KB |
| LICENSE | CC BY 4.0 |
| RIGHTS | CC BY |
| SOURCE | Europe PMC |
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
On the Definition of Signal-To-Noise Ratio and Contrast-To-Noise Ratio for fMRI Data By Marijke Welvaert, Yves Rosseel, Essa Yacoub Published in: PLoS ONE DOI: 10.1371/journal.pone.0077089 ABSTRACT Abstract Signal-to-noise ratio, the ratio between signal and noise, is a quantity that has been well established for MRI data but is still subject of ongoing debate and confusion when it comes to fMRI data. fMRI data are characterised by small activation fluctuations in a background of noise. Depending on how the signal of interest and the noise are identified, signal-to-noise ratio for fMRI data is reported by using many different definitions. Since each definition comes with a different scale, interpreting and comparing signal-to-noise ratio values for fMRI data can be a very challenging job. In this paper, we provide an overview of existing definitions. Further, the relationship with activation detection power is investigated. Reference tables and conversion formulae are provided to facilitate comparability between fMRI studies. INTRODUCTION In science and engineering, the signal-to-noise ratio (SNR) is a measure that compares the level of a desired signal to the level of background noise. For data acquired through magnetic resonance imaging (MRI), this quantification is typically used to allow comparison between imaging hardware, imaging protocols and acquisition sequences. In this context, SNR is conceptualised by comparing the signal of the MRI image to the background noise of the image [1], [2]. Mathematically, the SNR is the quotient of the (mean) signal intensity measured in a region of interest (ROI) and the standard deviation of the signal intensity in a region outside the anatomy of the object being imaged (i.e. a region from which no tissue signal is obtained) or the standard deviation from the noise distribution when known (e.g. the background noise in magnitude data follows a Rician distribution [3]). By varying, for example, field of view, scan parameters, magnetic field strength and slice thickness, the SNR of MRI images can be increased because these parameters influence the background noise. On the other hand, scanning hardware has also a major influence on the SNR levels of fMRI data. For example, SNR increases almost linearly with field strength [4] and is largely effected by the receiver coils (see [5] for a review). Translating SNR of MRI images to fMRI images is not as straightforward as it may seem. First of all, the noise in fMRI images does not correspond to the background noise of MRI images (see [6] for an excellent overview). In fMRI images, system noise effects the image as well as noise stemming from the subject (i.e. cardiac and respiratory pulsations, motion) and the task that is performed. Using time series outside the brain as noise measurement only, will not be sufficient to capture the noise data [1], [7], [8]. Secondly, since the main goal of fMRI studies is to detect small fluctuations over a period of time, image SNR might not be suitable. Therefore, temporal SNR (tSNR), in which the (mean) signal over time is taken into account, can be used to determine the SNR of fMRI time series [9]. How to define SNR for MRI and fMRI data is documented quite well in terms of its relationship with the MRI acquisition parameters. Several studies have demonstrated the dependence on these parameters and illustrated the necessary conditions to obtain higher SNR [1], [7], [10]. Also the relationship between SNR and CNR (contrast-to-noise ratio, a measure of image quality based on a contrast rather than the raw signal) has been investigated. For example, Wald investigated the improvement of BOLD CNR at higher field strength [11]. He showed that BOLD CNR is not directly affected by most acquisition parameters such as reciever coil choice, parallel imaging acceleration and voxel size, but only through the influence on the tSNR. However, in the end, one is interested in how well the experimentally induced activation can be detected. From a statistical perspective, it is not entirely clear how the SNR measurements relate to this detection power, because the small activation fluctuations (typically around 1–5%) cannot be derived from the mean signal based on a static image or time series. So for fMRI data, using the CNR of the time series instead of (t)SNR is more preferred because CNR compares a measure of the activation fluctuations to the noise [12]. In short, image SNR should be used to assess data quality of a single image, while tSNR gives information on the data quality of fMRI time series. CNR on the other hand, provides knowledge on how easy, or hard, it is to detect experimentally induced signal fluctuations. These different conceptualisations of SNR make it hard to compare results over studies. Therefore, in this paper, we provide an overview of the most current SNR definitions for fMRI. First, we demonstrate the use of these definitions in the literature and discuss thoroughly how the definitions can be applied. Second, we show analytic results that will enable the comparison between the several definitions. Third, we also analyzed the relationship with activation detection power and present simulation results that clarifies this relation. Finally, an application on real data illustrates how the definitions can be used in practice. METHODS To retrieve the range of possible values of SNR and CNR, we looked at the reported values of SNR and CNR in fMRI studies. NeuroImage published in 2012 about 458 fMRI studies that presented original fMRI data. These papers were manually screened if they reported SNR/CNR values of their data. In total, 50 of these studies mentioned the role of SNR/CNR for their experiment or method, while only 18 papers also reported SNR or CNR values. Since the determination of the SNR and CNR of real data can be a demanding job and is not standardly reported, we also looked at the SNR/CNR values that were reported in simulation studies. In simulation studies, the range of the reported SNR/CNR values was determined based on a representative sample of 119 articles describing at least one simulation study. This sample containes papers that were published between 1996 and 2012 in about 49 scientific journals. The reported values varied widely across studies and were almost exclusively labelled as SNR. Simulation study A simulation study was conducted to investigate the relationship between SNR/CNR levels and the power to detect activation in a basic GLM analysis. time series were simulated for three types or experimental design: (1) a block design, (2) an event-related (ER) design, and (3) a contrast between two conditions. These experimental designs serve as basic templates. More complex designs can be partially reduced to one of these three design types based on the specific research hypotheses at hand (i.e. a specific contrast or the effect of a specific predictor). An activation signal of 200s was modelled for each design. The block design consisted of alternating task and rest blocks that lasted 20s each. For the ER design, 25 events were randomly distributed over the whole time series. For the contrast, two alternating block conditions of 20s each were modelled with a rest period of 20s after each sequence and the effect of condition was twice as high as the effect of condition . Activation time series were the result of convolving the stimulus boxcar function with the