Defects activated photoluminescence in two-dimensional semiconductors: interplay between bound, charged, and free excitons.
Tongay S, Suh J, Ataca C, Fan W, Luce A, Kang JS, Liu J, Ko C, Raghunathanan R, Zhou J, Ogletree F, Li J, Grossman JC, Wu J. · 2013
Read Defects activated photoluminescence in two-dimensional semiconductors: interplay between bound, charged, and free excitons. by Tongay S, Suh J, Ataca C, Fan W, Luce A, Kang JS, Liu J, Ko C, Raghunathanan R, Zhou J, Ogletree F, Li J, Grossman JC, Wu J. (2013) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/europmc-pmc3772378.txt.
Introduction
Sefaattin Tongay and a large group of co-authors reported a physics study in Scientific Reports in 2013 on light emission from two-dimensional semiconductors. Single-layer materials such as molybdenum disulfide can emit light, and defects in the crystal can trap charge carriers and the energy packets called excitons. The team created missing-anion defects in controlled amounts with alpha-particle exposure or heating.
A new emission peak appeared below the main band, and overall light emission grew stronger as defects were added. Oddly, both effects vanished in a vacuum, which points to a role for molecules from the air sitting at the defect sites. The authors draw a sharp lesson: brightness at room temperature cannot be trusted as a sign of crystal quality in these materials. They also propose defect engineering as a way to tune optical properties.
Catalog record
| CREATOR | Tongay S, Suh J, Ataca C, Fan W, Luce A, Kang JS, Liu J, Ko C, Raghunathanan R, Zhou J, Ogletree F, Li J, Grossman JC, Wu J. |
|---|---|
| YEAR | 2013 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 26 KB |
| LICENSE | CC BY 4.0 |
| RIGHTS | CC BY |
| SOURCE | Europe PMC |
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Defects activated photoluminescence in two-dimensional semiconductors: interplay between bound, charged, and free excitons By Sefaattin Tongay, Joonki Suh, Can Ataca, Wen Fan, Alexander Luce, Jeong Seuk Kang, Jonathan Liu, Changhyun Ko, Rajamani Raghunathanan, Jian Zhou, Frank Ogletree, Jingbo Li Published in: Scientific Reports DOI: 10.1038/srep02657 ABSTRACT Abstract Point defects in semiconductors can trap free charge carriers and localize excitons. The interaction between these defects and charge carriers becomes stronger at reduced dimensionalities, and is expected to greatly influence physical properties of the hosting material. We investigated effects of anion vacancies in monolayer transition metal dichalcogenides as two-dimensional (2D) semiconductors where the vacancies density is controlled by α-particle irradiation or thermal-annealing. We found a new, sub-bandgap emission peak as well as increase in overall photoluminescence intensity as a result of the vacancy generation. Interestingly, these effects are absent when measured in vacuum. We conclude that in opposite to conventional wisdom, optical quality at room temperature cannot be used as criteria to assess crystal quality of the 2D semiconductors. Our results not only shed light on defect and exciton physics of 2D semiconductors, but also offer a new route toward tailoring optical properties of 2D semiconductors by defect engineering. In semiconductors, lattice point defects such as vacancies and interstitials can act as very efficient traps for electrons, holes and excitons, and strongly influence transport and optical properties of the host material. Excitons bound to defects, if recombine radiatively, lead to light emission at energies lower than the band-to-band optical transition energy. Such interactions become stronger in reduced dimensionalities due to tighter localization of the electron wavefunction. For example, in three dimensions (3D) within the hydrogenic defect model, shallow defects bind electrons at a ground-state binding energy equal to , where m* is the effective mass and εr is relative dielectric constant. This is increased to in two dimensions (2D) simply due to the dimensionality effect1. Similarly, the binding energy and recombination dynamics of Wannier and Frenkel excitons are expected to be drastically different going from 3D to 2D2,3,4. The escalated binding energy means stabilization of bound excitons and their emission features at higher temperatures, pointing to a potentially useful way to tailor optical properties of 2D semiconductors. Although the understanding of point defects in conventional 3D semiconductors is well established and the defects database is relatively complete, physics and behaviour of point defects in 2D semiconductors, such as the newly emerging monolayer semiconducting transition metal dichalcogenides (TMDs), have remained an unexplored field. In this work we report the effects of anion vacancies, the dominant point defect species, on photoluminescence (PL) and Raman spectra of monolayer TMDs. Since these materials become direct-bandgap semiconductors with relatively high PL intensity in the monolayer limit5, the defect effects can be easily monitored optically. We find that irradiation with MeV α particles or thermal annealing at sub-decomposition temperatures introduce anion vacancies in monolayer MoS2, MoSe2, and WSe2, where the vacancy density can be controlled by the irradiation dose or annealing time. These defects introduce a new emission peak at ~0.15 to 0.25 eV below the free-exciton PL peak, and its intensity is enhanced as the defect density is increased. Moreover, the overall PL intensity also increases at higher defect densities, and as such, the defective material becomes more luminescent compared to pristine monolayers. Surprisingly, these effects are absent when measured in vacuum, suggesting that the interaction between ambient gas molecules and the defect sites play a significant role in the process. Our density functional theory (DFT) calculations show that these anion vacancies create energy levels approximately 0.2 eV below the band edge, and gas molecules can be physically adsorbed at the defect sites with relatively large charge transfer, which electron-depletes the material. RESULTS Monolayer MoS2, MoSe2, and WSe2 flakes were mechanically exfoliated from bulk crystals onto 90 nm SiO2 where a relatively high contrast can be observed at the flakes6. The monolayers were identified using atomic force microscopy (AFM), Raman, and PL measurements. AFM measurements on monolayers yield a height of ~0.7 nm corresponding to the thickness of a single unit cell (Figure 1a). From the bulk to monolayers, the out-of-plane Raman mode (A1g) softens and the in-plane mode (E2g) stiffens for MoS27 and MoSe28,9, whereas for WSe210, the degenerate A1g and E2g modes in the bulk split by 12 cm−1 in the monolayer as a result of broken degeneracy (Figure 1b). The PL signal is greatly enhanced by orders of magnitude from the bulk to monolayer due to the indirect to direct bandgap transition, consistent with previous reports5,8,11. At room temperature, monolayer MoS2, MoSe2, and WSe2 show a strong PL peak at 1.84 eV, 1.56 eV and 1.65 eV, respectively (Figure 1c). The exfoliated monolayers were irradiated with 3 MeV α particles at controlled doses to create different densities of point defects, and the samples were cooled down to the lowest attainable temperature in our system (77 K) for PL and Raman measurements. Before and after the irradiation, the sulfur to molybdenum (S/Mo) atomic ratio was monitored using nano-Auger electron spectroscopy (nano-AES). We find that the S/Mo ratio decreases slightly (Figure 2a), implying that the irradiation induces S vacancies in the 2D crystal, consistent with earlier results12. After the irradiation, the full-width-at-half maximum of the Raman peaks slightly broadens (Figure 2b) due to relaxation of the Raman selection rule at the defects. [Figure: (a). AFM images taken on monolayer MoS2, MoSe2, and WSe2. (b). Raman spectrum measured on monolayer MoS2, MoSe2, and WSe2, where the solid and dashed curves correspond to monolayers and few-layers, respectively. (c). Room-temperature normalized PL for monolayer MoS2, MoSe2, and WSe2.] [Figure: (a). Nano-Auger spectrum taken on a monolayer MoS2 before and after irradiation with α particles at a dose of 8 × 1013 cm−2. (b). Raman spectrum of the same. (c). PL spectrum for pristine and irradiated monolayer MoS2 at the shown irradiation doses. The PL was taken at 77 K in N2 (50 Torr) environment with a constant laser excitation power. The irradiation-caused enhancement in bound exciton (XB) and free exciton (X0) emission intensity is indicated.] At 77 K, the as-exfoliated MoS2 monolayers display a strong PL peak at 1.90 eV corresponding to the direct bandgap at the K symmetry point. Upon the α particle irradiation at different doses, the 77-K PL spectrum changes significantly as shown in Figure 2c and these changes are summarized as follows: (1) a new PL peak appears at 1.78 eV and the integrated intensity of this peak increases with the irradiation dose; and (2) the integrated intensity of the main PL line at 1.90 eV increases by ~3 times while the PL peak position shifts to higher energy by ~20 meV. The Stopping and Range of Ions in Matter (SRIM) calculations estimate that 7.5 × 10−3 vacancy/cm × ion is generated on MoS2 upon the α particle irradiation, and this corresponds to 6 × 1011 cm−2 defect density, or approximately one defect per 100 unit cells, for 8 × 1013 cm−2 irradiation dose. We note that here the PL was all measured in the presence of N2 gas (~50 Torr), and the effect of N2 will be discussed later. The small blueshift and enhancement in the main PL intensity bear much resemblance with the