Standardized image interpretation and post processing in cardiovascular magnetic resonance: Society for Cardiovascular Magnetic Resonance (SCMR) board of trustees task force on standardized post processing.
Schulz-Menger J, Bluemke DA, Bremerich J, Flamm SD, Fogel MA, Friedrich MG, Kim RJ, von Knobelsdorff-Brenkenhoff F, Kramer CM, Pennell DJ, Plein S, Nagel E. · 2013
Read Standardized image interpretation and post processing in cardiovascular magnetic resonance: Society for Cardiovascular Magnetic Resonance (SCMR) board of trustees task force on standardized post processing. by Schulz-Menger J, Bluemke DA, Bremerich J, Flamm SD, Fogel MA, Friedrich MG, Kim RJ, von Knobelsdorff-Brenkenhoff F, Kramer CM, Pennell DJ, Plein S, Nagel E. (2013) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/europmc-pmc3695769.txt.
Introduction
Schulz-Menger and colleagues present consensus standards for interpreting and post-processing cardiovascular magnetic resonance scans, issued by a task force of the Society for Cardiovascular Magnetic Resonance. These scans produce a wide range of measured values. Without agreed standards, reports vary between operators and centres.
The document sets requirements for how images should be evaluated, both by eye and by measurement, and discusses common pitfalls in analysis. The task force is candid that evidence behind many recommendations is limited, so the guidance represents expert consensus built on the best available evidence. The goal is consistent quality and repeatable reports wherever the scans are read.
Catalog record
| CREATOR | Schulz-Menger J, Bluemke DA, Bremerich J, Flamm SD, Fogel MA, Friedrich MG, Kim RJ, von Knobelsdorff-Brenkenhoff F, Kramer CM, Pennell DJ, Plein S, Nagel E. |
|---|---|
| YEAR | 2013 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 75 KB |
| LICENSE | CC BY 4.0 |
| RIGHTS | CC BY |
| SOURCE | Europe PMC |
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Standardized image interpretation and post processing in cardiovascular magnetic resonance: Society for Cardiovascular Magnetic Resonance (SCMR) Board of Trustees Task Force on Standardized Post Processing By Jeanette Schulz-Menger, David A Bluemke, Jens Bremerich, Scott D Flamm, Mark A Fogel, Matthias G Friedrich, Raymond J Kim, Florian von Knobelsdorff-Brenkenhoff, Christopher M Kramer, Dudley J Pennell, Sven Plein, Eike Nagel Published in: Journal of Cardiovascular Magnetic Resonance DOI: 10.1186/1532-429X-15-35 ABSTRACT Abstract With mounting data on its accuracy and prognostic value, cardiovascular magnetic resonance (CMR) is becoming an increasingly important diagnostic tool with growing utility in clinical routine. Given its versatility and wide range of quantitative parameters, however, agreement on specific standards for the interpretation and post-processing of CMR studies is required to ensure consistent quality and reproducibility of CMR reports. This document addresses this need by providing consensus recommendations developed by the Task Force for Post Processing of the Society for Cardiovascular MR (SCMR). The aim of the task force is to recommend requirements and standards for image interpretation and post processing enabling qualitative and quantitative evaluation of CMR images. Furthermore, pitfalls of CMR image analysis are discussed where appropriate. Keywords: Magnetic resonance imaging, Heart, Recommendations, Image interpretation, Post processing PREAMBLE With mounting data on its accuracy and prognostic value, cardiovascular magnetic resonance (CMR) is becoming an increasingly important diagnostic tool with growing utility in clinical routine. Given its versatility and wide range of quantitative parameters, however, agreement on specific standards for the image interpretation and post processing of CMR studies is required to ensure consistent quality and reproducibility of CMR reports. This document addresses this need by providing consensus recommendations developed by the Task Force for Post Processing of the Society for Cardiovascular MR (SCMR). The aim of the task force is to recommend requirements and standards for image interpretation and post processing enabling qualitative and quantitative evaluation of CMR images. Furthermore, pitfalls of CMR image analysis are discussed where appropriate. The Task Force is aware that for many of the recommendations, the body of evidence is limited. Thus, this document represents expert consensus providing guidance based on the best available evidence at present as endorsed by the SCMR. As CMR undergoes rapid development, updated recommendations for image acquisition, interpretation and post processing are needed regularly and will be provided by online appendices when needed and updated Task Force papers in due course. The recommendations are considered for the application of CMR in clinical routine. For some applications, quantification is considered as providing added information but is not mandatory (e.g perfusion imaging), whereas for others quantification is required for all clinical reports (e.g. T2* assessment in iron overload). In general the intention of this task force is to describe, in which scenarios quantitative analysis should be performed and how it is performed. The recommendations respect societal recommendations for structured reporting of cardiovascular imaging studies in general (ACCF / ACR / AHA / ASE / ASNC / HRS / NASCI / RSNA / SAIP / SCAI / SCCT / SCMR) [1] and in specific for CMR studies (SCMR) [2]. These recommendations will be reviewed and updated regularly and updates made available on the SCMR website. The recommendations do not supersede clinical judgment regarding the contents of individual interpretation of imaging studies. The Task Force made every effort to avoid conflicts of interests and, where present, to disclose potential conflicts. GENERAL RECOMMENDATIONS The recommendations listed in this section apply to the acquisition and post processing of all CMR data. CMR studies should be performed for recommended indications [3], respecting published appropriateness criteria [4] and the recently published societal CMR expert consensus document [5]. Any analysis should be performed using uncompressed or lossless compressed DICOM (Digital Imaging and Communications in Medicine) source images. Readers should have adequate training and clinical experience. The identity and responsibility of the reader should be appropriately documented in the report. Data acquisition should conform to the recommendations of SCMR [6]. Furthermore, the reader of clinical data is also responsible for the use of adequate post processing hardware and software. The general requirements include – Workstation and screen of adequate specification and resolution (as per the specifications of the post-processing software) – Post processing software with regulatory approval for use in patients, ideally providing the following tools: – Ability to view all short-axis cines in a single display – Ability to perform endocardial and epicardial contour tracings on short-axis cines – Ability to correct for atrioventricular annular location from the long-axis slice onto the most basal left ventricular (LV) short-axis location in contour tracings – Cross references for confirmation of slice position – Ability to compare cine, late gadolinium enhancement (LGE) and/or perfusion images from the same location simultaneously – Ability to compare short- and long-axis images of the same region simultaneously – Ability to compare images of the approximate same location on the current and prior study simultaneously for longitudinal studies – Ability to perform (semi-) quantitative signal intensity (SI) analysis – Ability to perform standardized segmentation of the myocardium according to the model of the American Heart Association (AHA) [7] – Ability to use baseline-correction or comparison to a phantom for flow measurements can be helpful – Ability to manually correct heart rate, weight, body surface area – Regarding evaluation of angiography the software should provide the following tools: – Subtraction of post-contrast from pre-contrast 3D datasets – 3D multiplanar and maximum intensity projection (MIP) capabilities – Volume rendering and surface shaded reconstructions optional for reporting but not mandatory for quantitative analysis – Quantitative diameter analysis based on non-subtracted 3D-MR angiography (MRA) – MIP reconstruction based on non-subtracted or subtracted 3D-MRA datasets LEFT VENTRICULAR CHAMBER ASSESSMENT 1. Visual analysis a) Before analyzing the details, review all cines in cine mode, validate observations from one plane with the others, and check for artifacts. b) Dynamic evaluation of global LV function: Interpretation of both ventricular chambers, in concert with extracardiac structures including assessment for hemodynamic interaction between the two chambers (e.g., shunts, evidence of constrictive physiology). c) Assessment of LV function from a global and segmental perspective. Segmental wall motion is based on segmental wall thickening during systole. Wall motion is categorized as: hyperkinetic, normokinetic, hypokinetic, akinetic, dyskinetic. d) In presence of segmental wall motion abnormalities, use of standard LV segmentation nomenclature corresponding to the supplying coronary artery territories is recommended [2,7]. 2. Quantitative analysis a) General recommendations i. Calculated parameters: LV end-diastolic volume, LV end-systolic volume, LV ejection fraction, LV stroke volume, cardiac output, LV mass, and body-surface area indexed values of all except ejection fraction. The parameters quantified may vary depending on the clinical need. ii. Evaluation of the stack of short axis images with computer-aided analysis packages. iii. Contours of endocardial and epicardial borders at end-diastole and end-systole (Figure 1). [Figure: Left ventricular (LV) chamber quantification. For LV chamber quantification, the endocardial (blue) and epicardial (yellow) contours are delineated in diastole (top) and systole (bottom) in a stack of short axis slices that cover the whole left ventricle. a) and b) Illustrates the approach with inclusion of the papillary muscles as part of the LV volume. c) and d) Shows the approach with exclusion of the papillary muscles from the LV volume.] iv. Epicardial borders should be