Development of polydimethylsiloxane substrates with tunable elastic modulus to study cell mechanobiology in muscle and nerve.
Palchesko RN, Zhang L, Sun Y, Feinberg AW. · 2012
Read Development of polydimethylsiloxane substrates with tunable elastic modulus to study cell mechanobiology in muscle and nerve. by Palchesko RN, Zhang L, Sun Y, Feinberg AW. (2012) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/europmc-pmc3519875.txt.
Introduction
Cells feel the stiffness of what they sit on, and Rachelle N. Palchesko, Ling Zhang, Yan Sun, Adam W. Feinberg, and Nuno M. Neves build a dial for that stiffness in 2012. They blend two commercial silicone rubbers, Sylgard 527 and Sylgard 184, in varying ratios.
The blends yield surfaces from 5 kilopascals to 1.72 megapascals in stiffness, a range covering most soft tissues and wider than earlier gel systems offered. Stiffness changes independently of surface roughness, surface energy, and protein coating ability, so experiments can isolate mechanics alone. Muscle and nerve cells are the target users. The substrate set lets mechanobiology studies sweep the full softness range on one material platform.
Catalog record
| CREATOR | Palchesko RN, Zhang L, Sun Y, Feinberg AW. |
|---|---|
| YEAR | 2012 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 66 KB |
| LICENSE | CC BY 4.0 |
| RIGHTS | CC BY |
| SOURCE | Europe PMC |
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Development of Polydimethylsiloxane Substrates with Tunable Elastic Modulus to Study Cell Mechanobiology in Muscle and Nerve By Rachelle N. Palchesko, Ling Zhang, Yan Sun, Adam W. Feinberg, Nuno M. Neves Published in: PLoS ONE DOI: 10.1371/journal.pone.0051499 ABSTRACT Mechanics is an important component in the regulation of cell shape, proliferation, migration and differentiation during normal homeostasis and disease states. Biomaterials that match the elastic modulus of soft tissues have been effective for studying this cell mechanobiology, but improvements are needed in order to investigate a wider range of physicochemical properties in a controlled manner. We hypothesized that polydimethylsiloxane (PDMS) blends could be used as the basis of a tunable system where the elastic modulus could be adjusted to match most types of soft tissue. To test this we formulated blends of two commercially available PDMS types, Sylgard 527 and Sylgard 184, which enabled us to fabricate substrates with an elastic modulus anywhere from 5 kPa up to 1.72 MPa. This is a three order-of-magnitude range of tunability, exceeding what is possible with other hydrogel and PDMS systems. Uniquely, the elastic modulus can be controlled independently of other materials properties including surface roughness, surface energy and the ability to functionalize the surface by protein adsorption and microcontact printing. For biological validation, PC12 (neuronal inducible-pheochromocytoma cell line) and C2C12 (muscle cell line) were used to demonstrate that these PDMS formulations support cell attachment and growth and that these substrates can be used to probe the mechanosensitivity of various cellular processes including neurite extension and muscle differentiation. INTRODUCTION Over the past decade it has become evident that the mechanical environment has a profound effect on cell survival, proliferation, adhesion, differentiation and metabolism [1]–[8]. Pelham and Wang reported in 1997 that focal adhesion formation and migration of cultured rat kidney epithelial cells and 3T3 fibroblasts were regulated by the stiffness of polyacrylamide (PA) gels [2]. In 2006 Engler et al demonstrated that mesenchymal stem cell specification on collagen coated PA gels was directed towards neurons, muscle and bone on substrates that matched the elastic modulus of these tissues [1]. The insights gained from these types of studies have been extended into other areas where the mechanical environment is now recognized as an important factor. Recent work in cancer biology has revealed that the extracellular matrix (ECM) in tumors is characterized by increased stiffness and that ECM remodeling can lead to invasion and metastasis [9], [10]. Stem cells are similarly sensitive to ECM and substrate mechanics [8], where control of stiffness can drive differentiation into specific lineages [1], [7] or maintain stem cells in a pluripotent state [6]. The commonalities between these studies are experimental tools that control the mechanical environment of cells by modulating the stresses and/or strains cells sense and respond to. Understanding this underlying mechanobiology is important in order to develop improved platforms for in vitro cell analysis, tissue engineering scaffolds and regenerative medicine strategies. As the importance of the mechanical environment on cell behavior has been realized, researchers have developed a number of materials systems to probe these interactions. PA gels have been widely used to create substrates with elastic moduli (E) in the range of ∼0.1 kPa to ∼100 kPa, covering the range of many types of soft tissues in the body [1], [2], [6], [11]–[15]. Other types of hydrogels have also been used over a similar stiffness range including synthetic systems based on polyethylene glycol [16] as well as naturally-derived polymers including hyaluron [17], [18], methylcellulose [19], dextran [20], gelatin [21] and fibrin [22]. However, many tissue structures in the body are stiffer than these materials including dense ECM structures such as many types of basement membranes (E ∼1 MPa) [23], [24]. Further, at the tissue-scale cells may experience an effectively stiffer environment, such as arterial walls (E ∼800 kPa) and cardiac muscle under physiologic blood pressures (left ventricle at peak systole, E ≈ 30–400 kPa) [25], [26]. Rubber-like elastomers have elastic moduli in this range including polydimethylsiloxane (PDMS) [27]–[29], poly(n-butyl) acrylate [30] and polyesters [31]. However, the chemistry, water content and surface energy of these elastomers is substantially different then the softer hydrogels and have different synthesis and processing requirements. To date, no single material has been able to effectively cover the entire range of soft tissue elastic moduli from approximately 1 kPa to >1 MPa without changes in other major surface and/or bulk properties known to influence cell behavior. Thus, to fully understand the role of mechanics on cell function it would be ideal to tailor the elastic modulus without altering other material properties such as surface energy, chemistry and roughness. Here we report development of PDMS substrates where the elastic modulus can be easily and independently tuned to mimic soft tissues over a three order-of-magnitude range. To do this we have blended together two commercially available PDMS elastomers, Syglard 527 and Sylgard 184, in various mass to mass ratios to create low stiffness gels that transition to higher stiffness elastomers. Sylgard 527 and Sylgard 184 are each prepared to manufacturer’s specifications, preserving the stoichiometry of the crosslinking process during gel/elastomer formation. This is in distinct contrast to the reduction of crosslinker commonly used to decrease the elastic modulus of Sylgard 184, which leaves a large proportion of free polymer in the system that can leach out. We demonstrate that the elastic modulus can be controlled without altering surface roughness, wettability, and protein adsorption, material properties that can influence cell behavior. Further, we establish that multiple cell types can be cultured on these surfaces using the PC12 cell line as a model of neural cell adhesion and growth and the C2C12 cell line as a model of skeletal muscle cell adhesion, growth and differentiation. These examples will illustrate the complex role substrate elastic modulus in combination with surface chemistry and micropatterning has on cell behavior. METHODS Fabrication of Polydimethylsiloxane Substrates with Tunable Mechanical Properties Commercially available PDMS, Sylgard 527 gel and Sylgard 184 elastomer (Dow Corning), were blended to create PDMS substrates with tunable mechanical properties. Sylgard 527 was prepared per manufacturer’s directions by mixing equal weights of part A and part B in a Thinky-Conditioning mixer (Phoenix Equipment Inc, Rochester, NY, USA) for 2 minutes at 2000 RPM followed by 2 minutes of defoaming at 2000 RPM. Sylgard 184 was prepared per manufacturer’s directions by mixing 10 parts base to 1 part curing agent using the same mixing and defoaming cycle. Four different mass ratios of the Sylgard 184∶527 were evaluated; 5∶1, 1∶1, 1∶5, and 1∶10. Each blend was mixed by first preparing pure Sylgard 527 and 184 as described above, and then combining by the indicated mass ratio followed by an additional mixing and defoaming cycle. Once mixed, the PDMS was either poured into 150 mm diameter petri dishes to create ∼2 mm thick films for mechanical testing or spincoated onto 25 mm diameter glass coverslips at 4,000 RPM to create ∼15 µm thick films. All PDMS was cured at 65°C overnight (12–24 hours) for all experiments. Previous studies have reported that this cure time and temperature are sufficient to cure the PDMS such that mechanical properties are constant throughout our experimental protocol [32]. PDMS coated coverslips were treated in a UV-Ozone cleaner (Novascan Technologies, Ames,