A survey on gas sensing technology.

Liu X, Cheng S, Liu H, Hu S, Zhang D, Ning H. · 2012

Read A survey on gas sensing technology. by Liu X, Cheng S, Liu H, Hu S, Zhang D, Ning H. (2012) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/europmc-pmc3444121.txt.

Introduction

Liu and colleagues surveyed gas sensing technology in 2012, the instruments that sniff out gases for industry, safety, and research. Each sensing principle suits some jobs and fails others, so engineers keep refining calibration and design. The review sorts the field by the physical change each sensor exploits.

Methods that read electrical changes get the fullest treatment, split by sensing material. The roster runs from polymers and carbon nanotubes to metal oxide semiconductors and moisture-absorbing films. Optical, heat-based, sound-based, and chromatography approaches are sketched more briefly. The authors compare technologies on sensitivity and selectivity, the two scores that matter most, and dissect what drives each. Several routes to better scores are listed, along with directions for future development.

Catalog record

CREATORLiu X, Cheng S, Liu H, Hu S, Zhang D, Ning H.
YEAR2012
COLLECTIONPAPERS
FORMATTXT
FILE SIZE87 KB
LICENSECC BY 4.0
RIGHTSCC BY
SOURCEEurope PMC

Source: https://europepmc.org/articles/PMC3444121

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

A Survey on Gas Sensing Technology By Xiao Liu, Sitian Cheng, Hong Liu, Sha Hu, Daqiang Zhang, Huansheng Ning Published in: Sensors (Basel, Switzerland) DOI: 10.3390/s120709635 ABSTRACT Sensing technology has been widely investigated and utilized for gas detection. Due to the different applicability and inherent limitations of different gas sensing technologies, researchers have been working on different scenarios with enhanced gas sensor calibration. This paper reviews the descriptions, evaluation, comparison and recent developments in existing gas sensing technologies. A classification of sensing technologies is given, based on the variation of electrical and other properties. Detailed introduction to sensing methods based on electrical variation is discussed through further classification according to sensing materials, including metal oxide semiconductors, polymers, carbon nanotubes, and moisture absorbing materials. Methods based on other kinds of variations such as optical, calorimetric, acoustic and gas-chromatographic, are presented in a general way. Several suggestions related to future development are also discussed. Furthermore, this paper focuses on sensitivity and selectivity for performance indicators to compare different sensing technologies, analyzes the factors that influence these two indicators, and lists several corresponding improved approaches. INTRODUCTION Recently, gas sensing, as a typical application in intelligent systems, is receiving increasing attention in both industry and academia. Gas sensing technology has become more significant because of its widespread and common applications in the following areas: (1) industrial production (e.g., methane detection in mines) [1–28]; (2) automotive industry (e.g., detection of polluting gases from vehicles) [29–43]; (3) medical applications (e.g., electronic noses simulating the human olfactory system) [44–60]; (4) indoor air quality supervision (e.g., detection of carbon monoxide) [61–73]; (5) environmental studies (e.g., greenhouse gas monitoring) [74–86]. During the last fifty years, different studies have established various branches of gas sensing technology. Among them, the three major areas that receive the most attention are investigation of different kinds of sensors, research about sensing principles, and fabrication techniques [87–115]. In this paper, a classification of sensing technologies is given, followed by descriptions of the main technologies to provide a comprehensive review. Two key performance indicators are highlighted, to introduce and compare different sensing technologies. Current research status and recent developments in the gas sensing field are reported, to discuss potential future interests and topics. Moreover, suggestions on related topics' future development are also proposed. The remainder of the paper is organized as follows: Section 2 describes gas sensing methods' classification for further introduction, while Section 3 introduces performance evaluation and indicators of different gas sensing methods. Section 4 introduces sensing methods listed in Section 2 in detail. Technologies improving the sensitivity and selectivity of gas sensors are given in Section 5. Finally, Section 6 presents the conclusions. CLASSIFICATION OF GAS SENSING METHODS In order to give a clear introduction of sensing principles, this paper classifies gas sensing technologies into two groups: methods based on variation of electrical properties and other properties, as shown in Figure 1. PERFORMANCE INDICATORS AND GAS SENSOR'S STABILITY To evaluate the performance of gas sensing methods or gas sensors, several indicators should be considered: (1) sensitivity: the minimum value of target gases' volume concentration when they could be detected; (2) selectivity: the ability of gas sensors to identify a specific gas among a gas mix0ture; (3) response time: the period from the time when gas concentration reaches a specific value to that when sensor generates a warning signal; (4) energy consumption; (5) reversibility: whether the sensing materials could return to its original state after detection; (6) adsorptive capacity (also affects sensitivity and selectivity); (7) fabrication cost. More indicators for different sensing methods will be listed and compared in Section 4. Besides, gas sensors designed for the market must guarantee the stability of their operation, in other words, they should exhibit a stable and reproducible signal for a period of time. There are several factors leading to gas sensor's instability (extracted and concluded from [116]): (1) design errors (which should be avoided); (2) structural changes, such as variations of grain size or grain network; (3) phase shifts, which usually refers to the segregation of additives doped with sensing materials; (4) poisoning triggered by chemical reactions; (5) variation of the surrounding environment. In order to solve these problems, the following methods could be considered: (1) using materials with chemical and thermal stability; (2) optimizing elemental composition and grain size of sensing materials; (3) utilizing specific technology during surface pretreatment of sensors. Among those indicators mentioned above, sensitivity and selectivity are the two main indicators, which will be discussed in Section 5. GAS SENSING METHODS Methods Based on Variation of Electrical Properties 4.1. Metal Oxide Semiconductor 4.1.1. The most common sensing materials are metal oxide semiconductors, which provide sensors with several advantages such as low cost and high sensitivity. Generally, metal oxides can be classified into two types: non-transition and transition. The former (e.g., Al2O3) contains elements with only one oxidation state since much more energy is required to form other oxidation states, while the latter (e.g., Fe2O3) contains more oxidation states [81]. Therefore, transition-metal oxides could form various oxidation states on the surface, which is utilized by metal oxide semiconductors as sensing materials, compared to the non-transition ones. More precisely, transition-metal oxides with d0 and d10 electronic configurations could be used in gas sensing applications [99]. The d0 configuration could be found in transition metal oxides (e.g., TiO2, V2O5, WO3), and d10 appears in post-transition-metal oxides (e.g., SnO2 and ZnO). Although most common metal oxide semiconductors sensitive to gas concentration are n-type semiconductors, there are also a few kinds of p-type semiconductors like NiOx (usually doped with n-type semiconductor like TiO2) that could be used as gas sensor sensing materials. It is shown that 10% wt. NiOx content is needed to convert n-type conductivity into p-type. The main difference between n-type and p-type NiOx doped TiO2 film is that as temperature increases, the sensitivity of n-type towards reducing gases is increased, while that of the p-type is decreased [117]. Therefore p-type semiconductors have relatively lower operating temperatures than n-type ones. Sensors based on metal oxide semiconductors are mainly applied to detect target gases through redox reactions between the target gases and the oxide surface [118]. This process includes two steps [81]: (1) redox reactions, during which O− distributed on the surface of the materials would react with molecules of target gases, leading to an electronic variation of the oxide surface; and then (2) this variation is transduced into an electrical resistance variation of the sensors. The resistance variation could be detected by measuring the change of capacitance, work function, mass, optical characteristics or reaction energy [99]. Metal oxides, such as SnO2, CuO, Cr2O3, V2O5, WO3 and TiO2, can be utilized to detect combustible, reducing, or oxidizing gases with sensors which are mainly based on the resistance change responses to the target gases [119]. Tin dioxide (SnO2) is the commonly used gas sensing material. It is an n-type granular material whose electrical conductivity is dependent on the density of pre-adsorbed oxygen ions on its surface. The resistance of tin dioxide changes according to the variation of gas concentration (e.g., liquefied petroleum gas (LPG), methane (CH4), carbon monoxide (CO) and other reducing gases [33,120], while the relationship between resistance and target gas concentration is nonlinear [68].) Other

Read the complete text