Drug solubility: importance and enhancement techniques.
Savjani KT, Gajjar AK, Savjani JK. · 2012
Read Drug solubility: importance and enhancement techniques. by Savjani KT, Gajjar AK, Savjani JK. (2012) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/europmc-pmc3399483.txt.
Introduction
Savjani, Gajjar, and Savjani reviewed in 2012 why drug solubility matters and how to raise it when it falls short. A drug must dissolve at its absorption site before the body can take it up. Over forty percent of new drug candidates in industry barely dissolve in water, making solubility a central headache for formulators.
The review catalogs the toolbox: shrinking particles, engineering crystals, forming salts, spreading the drug in solid carriers, adding wetting agents, and trapping molecules in ring-shaped helpers. Chemical tweaks to the drug itself are covered too. Choosing among methods depends on the drug's properties, where it is absorbed, and the dose form wanted. The survey guides that choice.
Catalog record
| CREATOR | Savjani KT, Gajjar AK, Savjani JK. |
|---|---|
| YEAR | 2012 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 52 KB |
| LICENSE | CC BY 4.0 |
| RIGHTS | CC BY |
| SOURCE | Europe PMC |
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Drug Solubility: Importance and Enhancement Techniques By Ketan T Savjani, Anuradha K Gajjar, Jignasa K Savjani Published in: ISRN Pharmaceutics DOI: 10.5402/2012/195727 ABSTRACT Abstract Solubility, the phenomenon of dissolution of solute in solvent to give a homogenous system, is one of the important parameters to achieve desired concentration of drug in systemic circulation for desired (anticipated) pharmacological response. Low aqueous solubility is the major problem encountered with formulation development of new chemical entities as well as for the generic development. More than 40% NCEs (new chemical entities) developed in pharmaceutical industry are practically insoluble in water. Solubility is a major challenge for formulation scientist. Any drug to be absorbed must be present in the form of solution at the site of absorption. Various techniques are used for the enhancement of the solubility of poorly soluble drugs which include physical and chemical modifications of drug and other methods like particle size reduction, crystal engineering, salt formation, solid dispersion, use of surfactant, complexation, and so forth. Selection of solubility improving method depends on drug property, site of absorption, and required dosage form characteristics. 1. INTRODUCTION Solubility is the property of a solid, liquid, or gaseous chemical substance called solute to dissolve in a solid, liquid, or gaseous solvent to form a homogeneous solution of the solute in the solvent. The solubility of a substance fundamentally depends on the solvent used as well as on temperature and pressure. The extent of solubility of a substance in a specific solvent is measured as the saturation concentration where adding more solute does not increase its concentration in the solution [1]. The solvent is generally a liquid, which can be a pure substance or a mixture of two liquids. One may also speak of solid solution, but rarely of solution in a gas. The extent of solubility ranges widely, from infinitely soluble (fully miscible) such as ethanol in water, to poorly soluble, such as silver chloride in water. The term insoluble is often applied to poorly or very poorly soluble compounds [2]. Solubility occurs under dynamic equilibrium, which means that solubility results from the simultaneous and opposing processes of dissolution and phase joining (e.g., precipitation of solids). Solubility equilibrium occurs when the two processes proceed at a constant rate. Under certain conditions equilibrium solubility may be exceeded to give a so-called supersaturated solution, which is metastable [3]. Solubility is not to be confused with the ability to dissolve or liquefy a substance, since these processes may occur not only because of dissolution but also because of a chemical reaction. For example, zinc is insoluble in hydrochloric acid, but does dissolve in it by chemically reacting into zinc chloride and hydrogen, where zinc chloride is soluble in hydrochloric acid. Solubility does not also depend on particle size or other kinetic factors; given enough time, even large particles will eventually dissolve [4]. IUPAC defines solubility as the analytical composition of a saturated solution expressed as a proportion of a designated solute in a designated solvent. Solubility may be stated in units of concentration, molality, mole fraction, mole ratio, and other units [5]. Extensive use of solubility from different perspective has led to solubility being expressed in various manners. It is commonly expressed as a concentration, either by mass (g of solute per kg of solvent, g per dL (100 mL) of solvent), molarity, molality, mole fraction, or other similar descriptions of concentration. The maximum equilibrium amount of solute that can dissolve per amount of solvent is the solubility of that solute in that solvent under the specified conditions [6]. The advantage of expressing solubility in this manner is its simplicity, while the disadvantage is that it can strongly depend on the presence of other species in the solvent (e.g., the common ion effect). Saturated solutions of ionic compounds of relatively low solubility are sometimes described by solubility constants. It is a case of equilibrium process. It describes the balance between dissolved ions from the salt and undissolved salt. Similar to other equilibrium constants, temperature would affect the numerical value of solubility constant. The value of this constant is generally independent of the presence of other species in the solvent. The Flory-Huggins solution theory is a theoretical model describing the solubility of polymers. The Hansen Solubility Parameters and the Hildebrand solubility parameters are empirical methods for the prediction of solubility. It is also possible to predict solubility from other physical constants such as the enthalpy of fusion. The partition coefficient (Log P) is a measure of differential solubility of a compound in a hydrophobic solvent (octanol) and a hydrophilic solvent (water). The logarithm of these two values enables compounds to be ranked in terms of hydrophilicity (or hydrophobicity). USP and BP classify the solubility regardless of the solvent used, just only in terms of quantification and have defined the criteria as given in Table 1 [7, 8]. [Table: USP and BP solubility criteria.] The Biopharmaceutics Classification System (BCS) is a guide for predicting the intestinal drug absorption provided by the U.S. Food and Drug Administration. This system restricts the prediction using the parameters solubility and intestinal permeability. Solubility is based on the highest-dose strength of an immediate release product. A drug is considered highly soluble when the highest dose strength is soluble in 250 mL or less of aqueous media over the pH range of 1 to 7.5. The volume estimate of 250 mL is derived from typical bioequivalence study protocols that prescribe administration of a drug product to fasting human volunteers with a glass of water [9]. The intestinal permeability classification is based on a comparison to the intravenous injection. All those factors are highly important, since 85% of the most sold drugs in the USA and Europe are orally administered. All drugs have been divided into four classes: class I—high soluble and high permeable, class II—low soluble and high permeable, class III—low soluble and high permeable and class IV—low soluble and low permeable. 2. IMPORTANCE OF SOLUBILITY Oral ingestion is the most convenient and commonly employed route of drug delivery due to its ease of administration, high patient compliance, costeffectiveness, least sterility constraints, and flexibility in the design of dosage form. As a result, many of the generic drug companies are inclined more to produce bioequivalent oral drug products [10]. However, the major challenge with the design of oral dosage forms lies with their poor bioavailability. The oral bioavailability depends on several factors including aqueous solubility, drug permeability, dissolution rate, first-pass metabolism, presystemic metabolism, and susceptibility to efflux mechanisms. The most frequent causes of low oral bioavailability are attributed to poor solubility and low permeability. Solubility also plays a major role for other dosage forms like parenteral formulations as well [11]. Solubility is one of the important parameters to achieve desired concentration of drug in systemic circulation for achieving required pharmacological response [12]. Poorly water soluble drugs often require high doses in order to reach therapeutic plasma concentrations after oral administration. Low aqueous solubility is the major problem encountered with formulation development of new chemical entities as well as generic development. Any drug to be absorbed must be present in the form of an aqueous solution at the site of absorption. Water is the solvent of choice