PARalyzer: definition of RNA binding sites from PAR-CLIP short-read sequence data.

Corcoran DL, Georgiev S, Mukherjee N, Gottwein E, Skalsky RL, Keene JD, Ohler U. · 2011

Read PARalyzer: definition of RNA binding sites from PAR-CLIP short-read sequence data. by Corcoran DL, Georgiev S, Mukherjee N, Gottwein E, Skalsky RL, Keene JD, Ohler U. (2011) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/europmc-pmc3302668.txt.

Introduction

Corcoran and co-authors introduced a computer tool for pinpointing where proteins grip RNA, in a 2011 methods paper. New lab methods freeze proteins onto the RNA they hold and then sequence the fragments, revealing binding sites across the whole cell. The variant they studied uses a light activated building block that marks the exact contact point with a telltale letter change in the sequence.

Their tool, named PARalyzer, turns that letter change signal into high confidence binding sites with far less background noise. It also recovers the short sequence patterns that each protein prefers. The authors provide practical guidelines for using the approach, which helps researchers map how proteins control RNA splicing, stability, and decay.

Catalog record

CREATORCorcoran DL, Georgiev S, Mukherjee N, Gottwein E, Skalsky RL, Keene JD, Ohler U.
YEAR2011
COLLECTIONPAPERS
FORMATTXT
FILE SIZE66 KB
LICENSECC BY 4.0
RIGHTSCC BY
SOURCEEurope PMC

Source: https://europepmc.org/articles/PMC3302668

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

PARalyzer: definition of RNA binding sites from PAR-CLIP short-read sequence data By David L Corcoran, Stoyan Georgiev, Neelanjan Mukherjee, Eva Gottwein, Rebecca L Skalsky, Jack D Keene, Uwe Ohler Published in: Genome Biology DOI: 10.1186/gb-2011-12-8-r79 ABSTRACT Crosslinking and immunoprecipitation (CLIP) protocols have made it possible to identify transcriptome-wide RNA-protein interaction sites. In particular, PAR-CLIP utilizes a photoactivatable nucleoside for more efficient crosslinking. We present an approach, centered on the novel PARalyzer tool, for mapping high-confidence sites from PAR-CLIP deep-sequencing data. We show that PARalyzer delineates sites with a high signal-to-noise ratio. Motif finding identifies the sequence preferences of RNA-binding proteins, as well as seed-matches for highly expressed microRNAs when profiling Argonaute proteins. Our study describes tailored analytical methods and provides guidelines for future efforts to utilize high-throughput sequencing in RNA biology. PARalyzer is available at http://www.genome.duke.edu/labs/ohler/research/PARalyzer/. BACKGROUND RNA binding proteins (RBPs) play important roles in the life cycle of a transcript, from its nascence by RNA polymerase until its decay by RNases. All steps of RNA processing and function, including splicing, nuclear export, localization, stability, and small RNA-mediated regulation, are controlled by different RBPs and ribonucleoproteins [1]. The identification of which RBPs or ribonucleoproteins interact with which transcripts, how they interact, and where the interaction occurs, has been the focus of many studies. Recent advancements in high-throughput genomic technologies have resulted in profiles of transcriptome-wide RNA-protein interactions in vivo. Two of the most established methods for the investigation of these interactions are RIP-Chip [2] or RIP-seq [3,4] and crosslinking and immunoprecipitation (CLIP) [5]. RIP-Chip was the first method to use immunoprecipitation to identify RNA targets bound by specific RBPs at genome-wide scale [6]. Associated mRNAs are isolated, and then quantified using mRNA arrays or, more recently, subjected to high-throughput sequencing. This allows for the identification of all transcripts targeted by a particular RBP, but not for direct identification of where, or how many, RNA-protein interactions occur within a transcript. The second method, CLIP, typically uses short wave UV 254 nm crosslinking followed by immunoprecipitation and partial RNase digestion of the bound transcript. Conversion of the residual RNA segments into cDNA libraries and characterization by high-throughput sequencing yields small size windows in which the RNA-protein crosslinking occurred. PAR-CLIP (photoactivatable-ribonucleoside-enhanced crosslinking and immunoprecipitation) is a powerful modification of the CLIP technology for the isolation of protein-bound RNA segments [7]. Cells are first cultured with a photoreactive ribonucleoside analogue, typically 4-thiouridine (4SU), to boost RNA-protein crosslinking. This is followed by high-throughput sequencing of cDNAs generated from the crosslinked immunopurified RNA fragments. During cDNA generation, preferential base pairing of the 4SU crosslink product to a guanine instead of an adenine results in a thymine (T) to cytosine (C) transition in the PCR-amplified sequence, serving as a diagnostic mutation at the site of contact. The pattern of T = > C conversions, coupled with read density, can thus provide a strong signal to generate a high-resolution map of confident RNA-protein interaction sites. Here we present a new strategy specific for analysis of PAR-CLIP data to generate a transcriptome-wide high-resolution map of RNA-protein interaction sites. Our new method, dubbed PARalyzer, is designed to exploit the T = > C conversions introduced by the PAR-CLIP technology to generate high-resolution interaction sites that contain RBP binding sites with a strong signal-to-noise ratio. Combining PARalyzer interaction site identification with the motif-finding algorithm cERMIT [8], which is tailored to the analysis of high-throughput quantitative genomic data, reliably identifies the enriched common sequence patterns. Together, these two steps can be used to elucidate the transcriptome-wide set of RBP-mRNA interaction sites as well as the preferential binding motifs of the factors. We demonstrate the benefits of this approach on four published datasets, and provide guidelines and strategies for the analysis of future PAR-CLIP datasets. Both of these stand-alone command-line tools are available online [9]. RESULTS PAR-CLIP datasets We focused our analysis on human PAR-CLIP datasets described in Hafner et al. [7], which profile the targets of four distinct mRNA-interacting factors. Three of the datasets were generated from immunoprecipitation data of the sequence-specific RBPs Quaking (QKI), Pumilio2 (PUM2), and Insulin-like growth factor 2 binding protein 1 (IGF2BP1). While QKI is a well-studied splicing factor in the nucleus [10], Pumilio RBPs are involved in mRNA stability and translation in the cytoplasm [11]. The functions of Pumilio are widely studied in a variety of species, and its global RNA targeting properties has been examined across a large phylogeny [12-17]. IGF2BP1 belongs to a family of proteins that are able to regulate translation by their direct binding to target mRNAs [18]. The fourth dataset consists of pooled libraries assaying members of the Argonaute (AGO) family of RBPs, central components of the RNA-induced silencing complex (RISC), which directs microRNAs (miRNAs) to their target transcripts, thereby negatively impacting gene expression [19]. Different from the other RBPs, Argonaute members do not have a specific mRNA recognition site; rather, their targets are specified by the interaction of the miRNA in RISC with partially complementary sequences in the target mRNAs [19]. The seed region of the miRNA is regarded as the important sequence determinant in target mRNA interactions [20]. AGO crosslinking is currently a popular method to directly identify miRNA targets, but the libraries contain a mixture of all targets of those miRNAs expressed in a particular cellular context. Evaluating datasets for proteins with known sequence preferences allowed us to compare the interaction sites identified by PARalyzer with baseline methods, in terms of the presence of putative binding motifs normalized to the total size of the identified interaction sites. Initial analysis of PAR-CLIP data revealed that interaction sites of different proteins exhibit particular patterns of T = > C conversions, likely reflecting the accessibility of nucleotides in the RNA bound by the protein. Therefore, conversions do not have to include all thymines of a sequence motif equally, and may not even fall directly on top of conserved motifs at the interaction sites. Most notably, miRNA seed matches were observed to be largely devoid of T = > C conversions, and conversions were predominantly located directly upstream of the seed match. Methodology overview T = > C conversion events that occur at the site of RNA-protein crosslinking can be used to identify the actual RBP interactions at high resolution, and subsequently, which sequence motifs are found at or close to these interaction sites. We have developed a toolkit that employs a non-parametric kernel-density estimate classifier, PARalyzer (PAR-CLIP data analyzer), to identify the RNA-protein interaction sites from a combination of T = > C conversions and read density. In a second step, PARalyzer interaction sites can be provided to de novo motif finders to elucidate sequence preferences; we adapted our recently published cERMIT algorithm for this task, and for the analysis of AGO libraries as an important special case. PARalyzer Reads are first aligned to the genome, and those overlapping by at least a single nucleotide are grouped together. To exploit available read data in an effective way, we utilize relatively lenient alignment parameters. We allow reads to be as short as 13 nucleotides after adapter stripping, and a read may contain up to 2 mismatches restricted to T = > C conversions (in comparison, the analysis by Hafner et al. [7] used

Read the complete text