Selection of reliable reference genes for gene expression studies in peach using real-time PCR.

Tong Z, Gao Z, Wang F, Zhou J, Zhang Z. · 2009

Read Selection of reliable reference genes for gene expression studies in peach using real-time PCR. by Tong Z, Gao Z, Wang F, Zhou J, Zhang Z. (2009) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/europmc-pmc3224724.txt.

Introduction

Zhaoguo Tong and colleagues hunted for dependable reference genes for gene-expression work in peach, in this 2009 study in BMC Molecular Biology. Quantitative PCR studies must normalize their measurements against genes assumed to stay constant, yet no gene is stable in every experiment. No one had done this groundwork for peach, an important fruit crop.

The team measured eleven candidate genes across different peach samples and scored their stability with three established analysis programs, which largely agreed. Three genes, known by the codes TEF2, UBQ10, and RP II, came out most reliable, and the authors recommend using at least two reference genes together. Others, including the widely used 18S ribosomal RNA and GAPDH, proved too unstable in peach and should be avoided as controls.

Catalog record

CREATORTong Z, Gao Z, Wang F, Zhou J, Zhang Z.
YEAR2009
COLLECTIONPAPERS
FORMATTXT
FILE SIZE51 KB
LICENSECC BY 4.0
RIGHTSCC BY
SOURCEEurope PMC

Source: https://europepmc.org/articles/PMC3224724

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Selection of reliable reference genes for gene expression studies in peach using real-time PCR By Zhaoguo Tong, Zhihong Gao, Fei Wang, Jun Zhou, Zhen Zhang Published in: BMC Molecular Biology DOI: 10.1186/1471-2199-10-71 ABSTRACT Background RT-qPCR is a preferred method for rapid and reliable quantification of gene expression studies. Appropriate application of RT-qPCR in such studies requires the use of reference gene(s) as an internal control to normalize mRNA levels between different samples for an exact comparison of gene expression level. However, recent studies have shown that no single reference gene is universal for all experiments. Thus, the identification of high quality reference gene(s) is of paramount importance for the interpretation of data generated by RT-qPCR. Only a few studies on reference genes have been done in plants and none in peach (Prunus persica L. Batsch). Therefore, the present study was conducted to identify suitable reference gene(s) for normalization of gene expression in peach. Results In this work, eleven reference genes were investigated in different peach samples using RT-qPCR with SYBR green. These genes are: actin 2/7 (ACT), cyclophilin (CYP2), RNA polymerase II (RP II), phospholipase A2 (PLA2), ribosomal protein L13 (RPL13), glyceraldehyde-3-phosphate dehydrogenase (GAPDH), 18S ribosomal RNA (18S rRNA), tubblin beta (TUB), tubblin alpha (TUA), translation elongation factor 2 (TEF2) and ubiquitin 10 (UBQ10). All eleven reference genes displayed a wide range of Cq values in all samples, indicating that they expressed variably. The stability of these genes except for RPL13 was determined by three different descriptive statistics, geNorm, NormFinder and BestKeeper, which produced highly comparable results. Conclusion Our study demonstrates that expression stability varied greatly between genes studied in peach. Based on the results from geNorm, NormFinder and BestKeeper analyses, for all the sample pools analyzed, TEF2, UBQ10 and RP II were found to be the most suitable reference genes with a very high statistical reliability, and TEF2 and RP II for the other sample series, while 18S rRNA, RPL13 and PLA2 were unsuitable as internal controls. GAPDH and ACT also performed poorly and were less stable in our analysis. To achieve accurate comparison of levels of gene expression, two or more reference genes must be used for data normalization. The combinations of TEF2/UBQ10/RP II and TEF2/RP II were suggested for use in all samples and subsets, respectively. BACKGROUND Reverse transcriptase quantitative real-time polymerase chain reaction (RT-qPCR) has become a very powerful technique for detection and quantification of mRNA transcription levels of a selected gene of interest [1,2] due to its high sensitivity, specificity, reproducibility, no post-PCR processing and broad dynamic range [3], which allows a straightforward comparison between RNAs that differ widely in their abundance. To accurately quantify gene expression, many experimental variations should be taken into account, such as quality and amount of starting material, presence of inhibitors in different sample materials, primer design, and RNA extraction and retrotranscription efficiencies [1]. Therefore, selection of an appropriate normalization strategy is of crucial importance for the acquisition of biological meaningful data. Among several methods proposed so far [1,4], reference genes are the most frequently used to normalize RT-qPCR data and to control the experimental possible errors generated in the quantification of gene expressions, since the reference genes are exposed to the same preparation steps as the gene of interest. An ideal reference gene, known as an internal control gene or as reference gene, should be expressed at a constant level across various conditions, such as developmental stages or tissue types, and its expression is assumed to be unaffected by experimental parameters [5,6]. Moreover, the reference gene and the target gene should have similar ranges of expression in the samples to be analyzed [7]. However, several recent studies have scrutinized the stability of commonly known reference genes like 18S ribosomal RNA (18S rRNA), β-actin (ACT), and glyceraldehydes-3-phosphate dehydrogenase (GAPDH) used for the quantification of mRNA expression, and have documented that these genes should be used with caution as internal controls, because they showed different behaviors under different experiment conditions [8-13]. The reason for these expressional variabilities may be that the reference genes not only participate in the basic cell metabolism but also take part in other cellular process [14,15]. If the chosen reference gene has a large expression fluctuation, the normalization will lead to erroneous gene expression profiles of the target gene of interest [16,17]. In addition, the choice of a suitable control gene will depend on the scope and nature of the experiment to be performed [6]. Therefore, the selection of the most stable gene or set of genes as internal controls is a critical step to control the variability between samples for quantitative gene expression studies with a sensitive RT-qPCR technique [8]. Recently, a growing number of published articles reflect the importance of reference genes and the need to validate them for each particular experimental model. Nevertheless, most of these studies mainly deal with human or animal tissues. However, only a few have concerned plants such as wheat [18], barley [19], rice [20-22], potato [13], soybean [23], grape [24], poplar [25], tomato [26,27], coffee [28] and Arabidopsis thaliana [29,30]. To the best of our knowledge, there have been no reports on the suitability of reference genes for RT-qPCR studies of differential expression of genes in peach (Prunus persica L. Batsch). Peach fruit development and ripening are complex processes involving major changes in fruit metabolism [31]. Biochemical processes occur in a well-defined order under the control of a series of ripening-related genes leading to considerable changes in texture, pigmentation, taste and aroma [32]. The understanding of expression patterns of some key genes will help illuminate the mechanism involved in these processes in fleshy fruit and improve peach fruit quality and storage potential. Furthermore, studies of the molecular events associated with the ripening response of peach fruit to various exogenous regulators and melting and non-melting flesh genotypes may also help elucidate what contributes to fruit ripening. The aim of this research was to select and evaluate the stability of 11 reference genes for the purpose of normalization in studying peach gene expression. Statistical methods implemented in geNorm [33], BestKeeper [34] and NormFinder [35] were used. RESULTS To identify the best reference genes for studies of peach gene expression, a RT-qPCR assay, based on SYBR green detection, was designed for the transcription profiling of the eleven genes (18S rRNA, ACT, CYP2, TEF2, GAPDH, PLA2, RP II, RPL13, TUA, TUB and UBQ10, Table 1). The specificity of the amplifications was confirmed by the presence of a single band of expected size for each primer pairs in agarose gels following electrophoresis (data not shown) and by the single-peak melting curves of the PCR products. The melting temperatures of all PCR products were given in Table 2. No primer dimers or other products were resulted from non-specific amplification. No signals were detected in the minus RT and no-template controls. Efficiency of PCR reactions varied from 1.671 for RPL13 to 1.828 for ACT, and correlation coefficients ranged between 0.9952 and 0.9996 for RPL13 and RP II, respectively (Table 2). [Table: Description of peach reference genes for RT-qPCR] [Table: Primer sequences and amplicon characteristics for each of the 11 reference genes] Expression profiles of reference genes Analysis of the raw expression levels across all samples identified

Read the complete text