Choosing and using a plant DNA barcode.
Hollingsworth PM, Graham SW, Little DP. · 2011
Read Choosing and using a plant DNA barcode. by Hollingsworth PM, Graham SW, Little DP. (2011) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/europmc-pmc3102656.txt.
Introduction
Hollingsworth, Graham, and Little reviewed in 2011 the long effort to choose a standard DNA barcode for plants. A barcode is a short sequence that names a species the way a shop barcode names a product. Animals got a workable barcode early from one mitochondrial gene. Plants proved harder, since their mitochondrial DNA changes too slowly and their chloroplast genes each fall short in different ways.
The paper retraces how candidate regions were tested and combined, and what governs how well any barcode separates close species. It surveys early uses, from checking herbal products to sorting unknown seedlings, and the big shared library projects now under way. Tools for easy comparison against the library are still catching up. The authors' verdict is that a two gene chloroplast standard is workable today, with refinements to come. They wrote the review as a field guide for new users.
Catalog record
| CREATOR | Hollingsworth PM, Graham SW, Little DP. |
|---|---|
| YEAR | 2011 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 78 KB |
| LICENSE | CC BY 4.0 |
| RIGHTS | CC BY |
| SOURCE | Europe PMC |
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Choosing and Using a Plant DNA Barcode By Peter M Hollingsworth, Sean W Graham, Damon P Little, Dirk Steinke Published in: PLoS ONE DOI: 10.1371/journal.pone.0019254 ABSTRACT Abstract The main aim of DNA barcoding is to establish a shared community resource of DNA sequences that can be used for organismal identification and taxonomic clarification. This approach was successfully pioneered in animals using a portion of the cytochrome oxidase 1 (CO1) mitochondrial gene. In plants, establishing a standardized DNA barcoding system has been more challenging. In this paper, we review the process of selecting and refining a plant barcode; evaluate the factors which influence the discriminatory power of the approach; describe some early applications of plant barcoding and summarise major emerging projects; and outline tool development that will be necessary for plant DNA barcoding to advance. 1. SELECTING (AND REFINING) A PLANT BARCODE 1.1. Selecting a core-barcode Three important principles of DNA barcoding are standardisation, minimalism, and scalability. Translating this into the selection of barcoding regions involves choosing one or a few standard loci that can be sequenced routinely and reliably in very large and diverse sample sets, resulting in easily comparable data which enable species to be distinguished from one another. The standard animal CO1 DNA barcode fits these criteria well [1]. It is a haploid, uniparentally-inherited, single locus that shows high levels of discriminatory power [2]. It is a protein-coding region present in high-copy numbers per cell, and in animals it is not prone to drastic length variation, strong secondary structure, microinversions, or frequent mononucleotide repeats. These characteristics, combined with well-developed primer sets, result in the routine recovery of high quality sequences from many animal clades and facilitate sequence recovery from poorly-preserved samples. CO1 sequences can be consistently orientated, aligned with little supervision, and be translated to diagnose pseudogenes and identify sequencing errors. Finding a plant equivalent has proved difficult. The generally low rate of nucleotide substitution in plant mitochondrial genomes precludes the use of CO1 as a universal plant barcode [3]. Instead, the search for a plant barcode has involved looking outwith the mitochondrial genome and from the outset many researchers have accepted that multiple markers will be required to obtain adequate species discrimination. An historical overview of the search for a plant barcode is summarized in Figure 1, and discussed briefly below. Following initial in silico and laboratory-based assessments of the suitability of various coding and non-coding plastid markers (e.g. [4], [5]; Table 1), four main suggestions for a plant barcode were proposed by three different research groups/research consortia from the systematic community. These proposed barcodes involved various combinations of seven plastid markers. These were rpoC1+rpoB+matK or rpoC1+matK+trnH-psbA [6]; rbcL+trnH-psbA [7] and atpF-H+psbK-I+matK (K. J. Kim et al., unpublished). Various combinations of these markers were discussed at the 2nd International Barcode of Life conference in Taipei, but no agreement was reached. The following year, Lahaye et al. [8] proposed that matK alone should constitute the plant barcode. [Figure: Schematic timeline of the consideration of different markers as plant barcodes.Colours (red = warm; blue = cool) represent an informal measure of enthusiasm among DNA barcoding researchers in the systematics community for CBOL and iBOL adoption of different markers. The different shading of trnL (P6) reflects the parallel use of the P6 loop for DNA profiling of degraded DNAs in ecological studies (see text). * = the two markers that form the core-barcode for land plants. rbcL a is used in this figure to distinguish this shorter barcode region of the gene proposed by Kress and Erikson [7] and the full length (ca. 1400 bp) gene sequence of rbcL. Elsewhere in the text, when we refer to rbcL we are referring to the short barcode region. The dashed lines indicate the timing of three international barcoding conferences in London (2005), Taipei (2007) and Mexico City (2009). The consideration of the different markers as barcodes are from the following sources: Kress et al. [5], Chase et al. [102], Chen et al. [54], Kew consortium [4], [6], Kim et al. see [103], Lahaye et al. [8], Newmaster et al. [104], Kress and Erickson [7], Taberlet et al. [44], Presting et al. [105].] [Table: Characteristics of different markers that have routinely been included in plant barcoding studies.] One of the biggest challenges in reaching agreement on a plant barcode was a lack of comparative data encompassing all candidate markers and a broad taxonomic sample. The sequential timing of different proposals (Figure 1) effectively meant that some groups were proposing new markers and primers, as others were completing their projects. Two research groups published direct comparisons of the seven candidate markers and both concluded (a) that several different marker combinations gave equivalent performance, and (b) that none of the proposed barcodes was perfect in every respect [3], [9]. The same conclusion was reached by Seberg and Petersen [10] whose study included rpoC1, matK and trnH-psbA. Agreement on a common barcode is necessary for plant barcoding to progress towards the creation of a shared community resource. To facilitate and formalise the selection of a plant barcode, the Consortium for the Barcode of Life (CBOL) instigated the formation of a working group with representation from the different research groups/research consortia from the systematics community that had proposed or tested the seven leading candidate barcoding markers. This involved data generation, data pooling and joint analyses of the data, assessing the candidate markers against three criteria (a) universality (ease of amplification and sequencing), (b) sequence quality, and (c) discriminatory power. The outcome of these trials was that although some markers could be eliminated from consideration (e.g. rpoC1 and rpoB showed markedly lower discriminatory power), there was no straightforward solution as to which should form the plant barcode, as each of the candidate markers had different strengths and weaknesses. The majority preference of the CBOL Plant Working group was to recommend a core-barcode consisting of portions of two plastid coding regions, rbcL+matK, to be supplemented with additional markers as required [11]. The rbcL barcode consists of a 599 bp region at the 5′ end of the gene, located at bp 1–599 (including primer sites) in the complete Arabidopsis thaliana plastid genome sequence (gi 7525012:54958–56397). The matK barcode region consists of a ca. 841 bp region at the center of the gene, located between bp 205–1046 (including primer sites) in the complete A. thaliana plastid genome sequence (gi 7525012:2056–3570). The choice of rbcL+matK as a core barcode was based on the straightforward recovery of the rbcL region and the discriminatory power of the matK region. matK is one of the most rapidly evolving coding sections of the plastid genome [12], and is perhaps the closest plant analogue to the CO1 animal barcode. Unfortunately, matK can be difficult to PCR amplify using existing primer sets – particularly in non-angiosperms (see below). In contrast, the barcode region of rbcL is easy to amplify, sequence, and align in most land plants and provides a useful backbone to the barcode dataset, despite it having only modest discriminatory power. Two-marker plastid barcodes gave better discrimination than single marker barcodes, but no other 2-marker or multi-marker plastid barcode gave appreciably greater species resolution than the rbcL+matK combination [11]. As both of these markers are coding regions,