Mucoadhesive drug delivery systems.
Shaikh R, Raj Singh TR, Garland MJ, Woolfson AD, Donnelly RF. · 2011
Read Mucoadhesive drug delivery systems. by Shaikh R, Raj Singh TR, Garland MJ, Woolfson AD, Donnelly RF. (2011) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/europmc-pmc3053525.txt.
Introduction
Shaikh and coauthors reviewed in 2011 drug delivery systems designed to stick to mucus lined surfaces inside the body. Holding a medicine in place on the moist lining of the mouth, nose, eye, gut, or other passages lets it release slowly where it is needed. Such routes also suit drugs that stomach acid destroys or that the liver strips out after swallowing.
Stickiness depends on both the tissue and the chemistry of the carrier material, and the review explains the forces involved and how they are measured in the lab. It then tours delivery designs for the mouth, nose, eye, digestive tract, and reproductive and rectal routes, with examples for each. Sticky systems raise how much drug reaches the blood and how long it acts. The authors see special promise for fragile large molecules such as peptides.
Catalog record
| CREATOR | Shaikh R, Raj Singh TR, Garland MJ, Woolfson AD, Donnelly RF. |
|---|---|
| YEAR | 2011 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 63 KB |
| LICENSE | CC BY 4.0 |
| RIGHTS | CC BY |
| SOURCE | Europe PMC |
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Mucoadhesive drug delivery systems By Rahamatullah Shaikh, Thakur Raghu Raj Singh, Martin James Garland, A David Woolfson, Ryan F. Donnelly Published in: Journal of Pharmacy and Bioallied Sciences DOI: 10.4103/0975-7406.76478 ABSTRACT Mucoadhesion is commonly defined as the adhesion between two materials, at least one of which is a mucosal surface. Over the past few decades, mucosal drug delivery has received a great deal of attention. Mucoadhesive dosage forms may be designed to enable prolonged retention at the site of application, providing a controlled rate of drug release for improved therapeutic outcome. Application of dosage forms to mucosal surfaces may be of benefit to drug molecules not amenable to the oral route, such as those that undergo acid degradation or extensive first-pass metabolism. The mucoadhesive ability of a dosage form is dependent upon a variety of factors, including the nature of the mucosal tissue and the physicochemical properties of the polymeric formulation. This review article aims to provide an overview of the various aspects of mucoadhesion, mucoadhesive materials, factors affecting mucoadhesion, evaluating methods, and finally various mucoadhesive drug delivery systems (buccal, nasal, ocular, gastro, vaginal, and rectal). In the last two decades, mucoadhesion has shown renewed interest for prolonging the residence time of mucoadhesive dosage forms through various mucosal routes in drug delivery applications. Mucoadhesive-based topical and local systems have shown enhanced bioavailability. Mucoadhesive drug delivery gives rapid absorption and good bioavailability due to its considerable surface area and high blood flow. Drug delivery across the mucosa bypasses the first-pass hepatic metabolism and avoiding the degradation of gastrointestinal enzymes. Thus mucosal drug delivery system could be of value in delivering a growing number of high-molecular-weight sensitive molecules such as peptide and oligonucleotides. In this review, the aim is to provide detailed understanding of mucoadhesion, bioadhesion of polymer, and techniques for the determination of mucoadhesion; finally most common routes of mucoadhesive administration will be presented along with examples of formulation studied. BIOADHESION AND MUCOADHESION The term bioadhesion can be defined as the state in which two materials, at least one biological in nature, are held together for an extended period of time by interfacial forces.[1] In biological systems, bioadhesion can be classified into 3 types: Type 1, adhesion between two biological phases, for example, platelet aggregation and wound healing.Type 2, adhesion of a biological phase to an artificial substrate, for example, cell adhesion to culture dishes and biofilm formation on prosthetic devices and inserts.Type 3, adhesion of an artificial material to a biological substrate, for example, adhesion of synthetic hydrogels to soft tissues[2] and adhesion of sealants to dental enamel. For drug delivery purposes, the term bioadhesion implies attachment of a drug carrier system to a specified biological location. The biological surface can be epithelial tissue or the mucus coat on the surface of a tissue. If adhesive attachment is to a mucus coat, the phenomenon is referred to as mucoadhesion. Leung and Robinson[3] described mucoadhesion as the interaction between a mucin surface and a synthetic or natural polymer. Mucoadhesion should not be confused with bioadhesion; in bioadhesion, the polymer is attached to the biological membrane and if the substrate is mucus membrane the term mucoadhesion is used. THEORIES OF MUCOADHESION Various theories exist to explain at least some of the experimental observations made during the bioadhesion process. Unfortunately, each theoretical model can only explain a limited number of the diverse range of interactions that constitute the bioadhesive bond.[4] However, four main theories can be distinguished. WETTING THEORY OF MUCOADHESION The wetting theory is perhaps the oldest established theory of adhesion. It is best applied to liquid or low-viscosity bioadhesives. It explains adhesion as an embedding process, whereby adhesive agents penetrate into surface irregularities of the substrate and ultimately harden, producing many adhesive anchors. Free movement of the adhesive on the surface of the substrate means that it must overcome any surface tension effects present at the interface.[5] The wetting theory calculates the contact angle and the thermodynamic work of adhesion. The work done is related to the surface tension of both the adhesive and the substrate, as given by Dupre’s equation;[6] (1)ωA= γb+γt-γb where ωA is the specific thermodynamic work of adhesion and γb, γτ, and γbt represent, respectively, the surface tensions of the bioadhesive polymer, the substrate, and the interfacial tension. The adhesive work done is a sum of the surface tensions of the two adherent phases, less the interfacial tensions apparent between both phases.[7] Figure 1 shows a drop of liquid bioadhesive spreading over a soft-tissue surface. [Figure: A liquid bioadhesive spreading over a typical soft tissue surface] Horizontal resolution of the forces gives the Young equation: (2)γta= γbt+γbacosθ where θ is the angle of contact, γbt is the surface tension between the tissue and polymer, γba is the surface tension between polymer and air, and γta is the surface tension between tissue and air. Equation 3 states that if the angle of contact,θ, is greater than zero, the wetting will be incomplete. If the vector γta greatly exceeds γbt + γba, that is: (3)γta≥ γbt+γba then θ will approach zero and wetting will be complete. If a bioadhesive material is to successfully adhere to a biological surface, it must first dispel barrier substances and then spontaneously spread across the underlying substrate, either tissue or mucus. The spreading coefficient, Sb, can be defined as shown in Equation 4: (4)Sb= γta-γbt-γba >0 which states that bioadhesion is successful if Sb is positive, thereby setting the criteria for the surface tension vectors; in other words, bioadhesion is favored by large values of γta or by small values of γbt and γba.[7] ELECTROSTATIC THEORY OF MUCOADHESION According to electrostatic theory, transfer of electrons occurs across the adhesive interface and adhering surface. This results in the establishment of the electrical double layer at the interface and a series of attractive forces responsible for maintaining contact between the two layers.[8] DIFFUSION THEORY OF MUCOADHESION Diffusion theory describes that polymeric chains from the bioadhesive interpenetrate into glycoprotein mucin chains and reach a sufficient depth within the opposite matrix to allow formation of a semipermanent bond.[9] The process can be visualized from the point of initial contact. The existence of concentration gradients will drive the polymer chains of the bioadhesive into the mucus network and the glycoprotein mucin chains into the bioadhesive matrix until an equilibrium penetration depth is achieved as shown in Figure 2. [Figure: (a) Schematic representation of the diffusion theory of bioadhesion. Blue polymer layer and red mucus layer before contact; (b) Upon contact; (c) The interface becomes diffuse after contact for a period of time] The exact depth needed for good bioadhesive bonds is unclear, but is estimated to be in the range of 0.2–0.5 μm.[10] The mean diffusional depth of the bioadhesive polymer segments, s, may be represented by Equation 5: (5)s=2tD where D is the diffusion coefficient and t is the contact time. Duchene[11] adapted Equation 5 to give Equation 6, which can be used to determine the time, t, to bioadhesion of a particular polymer: (6)t=l2Db in which l represents the interpenetrating depth and Db the diffusion coefficient of a bioadhesive through the substrate. Once intimate contact is achieved, the substrate and adhesive chains move along their respective concentration