Tape-Arabidopsis Sandwich - a simpler Arabidopsis protoplast isolation method.
Wu FH, Shen SC, Lee LY, Lee SH, Chan MT, Lin CS. · 2009
Read Tape-Arabidopsis Sandwich - a simpler Arabidopsis protoplast isolation method. by Wu FH, Shen SC, Lee LY, Lee SH, Chan MT, Lin CS. (2009) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/europmc-pmc2794253.txt.
Introduction
Wu and colleagues presented a faster way in 2009 to free living plant cells from their walls, using the small weed Arabidopsis. Such wall-free cells, called protoplasts, let researchers test genes and watch proteins interact inside a living cell. The older method cut leaves into thin slivers, which was slow and often damaged the cells.
Their Tape-Arabidopsis Sandwich sticks one tape to the leaf top and another tape to the underside. Peeling the lower tape strips off the bottom skin, so enzymes can reach the inner cells and digest their walls. Ready protoplasts take under an hour, and gene tests can run within two hours, with less skill and gear needed.
Catalog record
| CREATOR | Wu FH, Shen SC, Lee LY, Lee SH, Chan MT, Lin CS. |
|---|---|
| YEAR | 2009 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 28 KB |
| LICENSE | CC BY 4.0 |
| RIGHTS | CC BY |
| SOURCE | Europe PMC |
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Tape-Arabidopsis Sandwich - a simpler Arabidopsis protoplast isolation method By Fu-Hui Wu, Shu-Chen Shen, Lan-Ying Lee, Shu-Hong Lee, Ming-Tsar Chan, Choun-Sea Lin Published in: Plant Methods DOI: 10.1186/1746-4811-5-16 ABSTRACT Background Protoplasts isolated from leaves are useful materials in plant research. One application, the transient expression of recombinant genes using Arabidopsis mesophyll protoplasts (TEAMP), is currently commonly used for studies of subcellular protein localization, promoter activity, and in vivo protein-protein interactions. This method requires cutting leaves into very thin slivers to collect mesophyll cell protoplasts, a procedure that often causes cell damage, may yield only a few good protoplasts, and is time consuming. In addition, this protoplast isolation method normally requires a large number of leaves derived from plants grown specifically under low-light conditions, which may be a concern when material availability is limited such as with mutant plants, or in large scale experiments. Results In this report, we present a new procedure that we call the Tape-Arabidopsis Sandwich. This is a simple and fast mesophyll protoplast isolation method. Two kinds of tape (Time tape adhered to the upper epidermis and 3 M Magic tape to the lower epidermis) are used to make a "Tape-Arabidopsis Sandwich". The Time tape supports the top side of the leaf during manipulation, while tearing off the 3 M Magic tape allows easy removal of the lower epidermal layer and exposes mesophyll cells to cell wall digesting enzymes when the leaf is later incubated in an enzyme solution. The protoplasts released into solution are collected and washed for further use. For TEAMP, plasmids carrying a gene expression cassette for a fluorescent protein can be successfully delivered into protoplasts isolated from mature leaves grown under optimal conditions. Alternatively, these protoplasts may be used for bimolecular fluorescence complementation (BiFC) to investigate protein-protein interactions in vivo, or for Western blot analysis. A significant advantage of this protocol over the current method is that it allows the generation of protoplasts in less than 1 hr, and allows TEAMP transfection to be carried out within 2 hr. Conclusion The protoplasts generated by this new Tape-Arabidopsis Sandwich method are suitable for the same range of research applications as those that use the current method, but require less operator skill, equipment and time. BACKGROUND Plant cells are usually protected by a rigid cell wall comprised of cellulose that provides structural support for the plant. The cell wall can be digested away by an enzyme cocktail containing cellulase and macerozyme, resulting in membrane-bound protoplasts. A variety of different transfection techniques, such as PEG-mediated, electroportation, and microinjection, can then be used to deliver recombinant DNA plasmids into the protoplasts. The transfected protoplasts are then used for further investigations. In Arabidopsis research, protoplast transfection is well established [1-3]. A protocol that has become popular in recent years [4], transient expression in Arabidopsis mesophyll protoplasts (TEAMP), uses Arabidopsis plants grown in pots as opposed to cells in suspension culture. One advantage of this technique is that it is not necessary to maintain the material in a sterile environment. Also, there is no need to generate suspension cultures, which is time-consuming and often difficult to accomplish with many Arabidopsis mutants and ecotypes. There is also an increased likelihood that these protoplasts maintain in planta physiology and responses to signal transduction. TEAMP thus has a wide range of applications in plant investigation [4]. The current method of protoplast isolation has several drawbacks that limit its utility. First is the need for strict control of plant growth environment, as some environmental changes will result in reduced transfection efficiency [4]. Because Arabidopsis is sensitive to environmental changes, it must be grown under conditions of both relatively short photoperiod and low light for optimal efficiency of TEAMP [4]. The second drawback is the necessity to slice leaves manually. Successful cell isolations require that the leaf is cut into 0.5-1 mm strips, on a suitable support, without crushing the leaf tissue at the cutting site. The blade must be changed after every four or five leaves. A third concern is the length of time required. It takes 4-5 hr to isolate the protoplasts and 6-7 hr to obtain the transfected protoplasts. Therefore, success with the current protocol needs a high degree of skill and much experience. In tobacco [5], cereals [6], and Arabidopsis [7], the leaf epidermal layer can be peeled away from the leaf using forceps with operator skill, so that mesophyll cells can be exposed to the digestion buffer without the epidermis obstructing access. In this report, we describe a simple method that does not suffer from any of the limitations described above. Using two different kinds of tape, the epidermal cells are simply peeled away from the leaf, allowing the enzyme solution access to the intercellular space in order to prepare the protoplasts. METHODS Plant Material and Growth Conditions Arabidopsis thaliana plants were grown in a mixture of vermiculite, perlite, and peat moss at a 1:1:1 ratio in an environmentally-controlled chamber with a long photoperiod (16 hr light and 8 hr dark) at 22°C. The transgenic lines and plasmids were obtained from the Arabidopsis Biological Resource Center (ABRC, Columbus, OH), and had been deposited by Dr. B.K. Nelson [8]. Protoplast Isolation Leaves (width: 2 cm, length: 5 cm in optimal light condition; width: 0.5 cm; length: 2.5 cm in low light conditions) were collected from 3 to 5-week-old plants grown under optimal light (ca. 150 μE·m-2·s-1) or low light (ca. 50·μE m-2·s-1) conditions. Arabidopsis protoplasts were isolated in two ways. First, to recreate the current technique, protoplasts were made according to the procedure of Yoo et al. [4]. Second, in a new technique, selected leaves were used in a 'Tape-Arabidopsis Sandwich' experiment. The upper epidermal surface was stabilized by affixing a strip of Time tape (Time Med, Burr Ridge, IL) while the lower epidermal surface was affixed to a strip of Magic tape (3 M, St. Paul, MN). The Magic tape was then carefully pulled away from the Time tape, peeling away the lower epidermal surface cell layer. The peeled leaves (7 to 10 optimal-light-growth leaves, about 1-2 g, up to 5 g), still adhering to the Time tape, were transferred to a Petri dish containing 10 mL of enzyme solution [1% cellulase 'Onozuka' R10 (Yakult, Tokyo, Japan), 0.25% macerozyme 'Onozuka' R10 (Yakult), 0.4 M mannitol, 10 mM CaCl2, 20 mM KCl, 0.1% BSA and 20 mM MES, pH 5.7]. The leaves were gently shaken (40 rpm on a platform shaker) in light for 20 to 60 min until the protoplasts were released into the solution. The protoplasts were centrifuged at 100 × g for 3 min in an Eppendorff A-4-44 rotor (Hamburg, Germany), washed twice with 25 mL of pre-chilled modified W5 solution (154 mM NaCl, 125 mM CaCl2, 5 mM KCl, 5 mM glucose, and 2 mM MES, pH 5.7) and incubated on ice for 30 min. During the incubation period, protoplasts were counted using a hemocytometer under a light microscope. The protoplasts were then centrifuged and resuspended in modified MMg solution (0.4 M mannitol, 15 mM MgCl2, and 4 mM MES, pH 5.7) to a final concentration of 2 to 5 × 105 cells/mL. Protoplast Transfection Assays Protoplasts were transfected by a modified TEAMP method [4]. Approximately