Fpocket: an open source platform for ligand pocket detection.

Le Guilloux V, Schmidtke P, Tuffery P. · 2009

Read Fpocket: an open source platform for ligand pocket detection. by Le Guilloux V, Schmidtke P, Tuffery P. (2009) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/europmc-pmc2700099.txt.

Introduction

Le Guilloux, Schmidtke, and Tuffery released in 2009 Fpocket, a free program that finds the pockets on a protein's surface where drug molecules might sit. Structure-based drug hunting starts by docking thousands of candidate compounds into such a pocket, so spotting the right pocket comes first. Many proteins' pockets were still found by eye or by luck.

Fpocket builds a geometric mesh of the protein and marks hollow spheres that nestle against its surface, clustering them into pockets. On proteins with known bound drugs, the true pocket sat in its top three guesses 94 percent of the time. For empty proteins the figure was 92 percent. It beat the field's standard tools while running faster. The package includes benchmarking and descriptor tools, and its open code invites others to build better scoring on top.

Catalog record

CREATORLe Guilloux V, Schmidtke P, Tuffery P.
YEAR2009
COLLECTIONPAPERS
FORMATTXT
FILE SIZE48 KB
LICENSECC BY 4.0
RIGHTSCC BY
SOURCEEurope PMC

Source: https://europepmc.org/articles/PMC2700099

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Fpocket: An open source platform for ligand pocket detection By Vincent Le Guilloux, Peter Schmidtke, Pierre Tuffery Published in: BMC Bioinformatics DOI: 10.1186/1471-2105-10-168 ABSTRACT Background Virtual screening methods start to be well established as effective approaches to identify hits, candidates and leads for drug discovery research. Among those, structure based virtual screening (SBVS) approaches aim at docking collections of small compounds in the target structure to identify potent compounds. For SBVS, the identification of candidate pockets in protein structures is a key feature, and the recent years have seen increasing interest in developing methods for pocket and cavity detection on protein surfaces. Results Fpocket is an open source pocket detection package based on Voronoi tessellation and alpha spheres built on top of the publicly available package Qhull. The modular source code is organised around a central library of functions, a basis for three main programs: (i) Fpocket, to perform pocket identification, (ii) Tpocket, to organise pocket detection benchmarking on a set of known protein-ligand complexes, and (iii) Dpocket, to collect pocket descriptor values on a set of proteins. Fpocket is written in the C programming language, which makes it a platform well suited for the scientific community willing to develop new scoring functions and extract various pocket descriptors on a large scale level. Fpocket 1.0, relying on a simple scoring function, is able to detect 94% and 92% of the pockets within the best three ranked pockets from the holo and apo proteins respectively, outperforming the standards of the field, while being faster. Conclusion Fpocket provides a rapid, open source and stable basis for further developments related to protein pocket detection, efficient pocket descriptor extraction, or drugablity prediction purposes. Fpocket is freely available under the GNU GPL license at . BACKGROUND In the recent years, in silico structure based ligand design (SBLD) has become a major approach for the exploration of protein function and drug discovery. It has been proven to be efficient in the identification of molecular probes, in investigation of molecular recognition, or in the identification of candidate therapeutic compounds (see for instance [1,2]). Whereas SBLD encompasses a wide range of aspects, one approach of importance is structure based virtual screening (SBVS). In SBVS, one searches, given the structure of a protein, to dock candidate compounds to identify those likely to bind into a candidate ligand binding site (see for instance [3] and references included). The identification and characterization of pockets and cavities of a protein structure is a key issue of such process that has been the subject of an increasing number of studies in the last decade. Several difficult aspects have to be considered among which: (i) the candidate pocket identification itself [4-26]. Here, one needs methods to identify and delimit cavities at the protein surface that are likely to bind small compounds. (ii) pocket ranking according to their likeliness to accept a small drug-like compound as ligand, for instance. Since often several pockets are detected at a protein surface, it is necessary to have some characterization of them in order to select the relevant ones. Although the largest pocket tends to frequently correspond to the observed ligand binding site (e.g. [18]), this rule cannot be generalised. Different studies have tackled this problem, see for instance [18,19,21,27,28]. It has in particular been shown that the use of evolutionnary information such as residue conservation helps re-ranking the pockets [19,21]. (iii) Last, but not least, there is often an adaptation – the so called induced fit – of the pocket geometry to the formation of a complex with the ligand (see for instance [29-32]). This last point creates several issues in terms of pocket detection – the pocket could or could not be properly detected in absence of ligand – and in terms of scoring since scoring functions are strongly dependent on the quality of the pocket identification and delimitation, but also are sensitive to conformational changes. Here, we focus on the primary but central aspect of candidate pocket identification from structure. It is not easy to summarise the diversity of approaches that have been proposed so far for candidate pocket identification. Roughly, some are based on pure geometric analysis of the surface of the protein [4-15,18,20,22-26], whereas some others involve energy calculations [16,17]. Another way of distinguishing between the various approaches is to consider the detection algorithms. These can be classified as grid-based, and grid-free approaches. Grid based approaches [4,11,15-17,19,20,23] cover the proteins with a 3D grid and then search for grid points that are not situated within the protein and that satisfy some condition. For instance, POCKET [4], and the derived LigSite [11] search for protein-solvent-protein (PSP) events on the grids to identify pockets as positions enclosed on both sides by the protein. Pocket-Picker [23] uses a buriedness index to identify clusters of grid points likely to correspond to ligand binding pockets. Laurie and Jackson [17] position a methyl probe at grid points and calculate an interaction energy with the protein. An et al. [16] calculate a grid potential map of the Van der Waals force field using a carbon atom probe. Grid free approaches encompass (non exhaustive) probe (or sphere) based approaches as well as methods using the concepts of Voronoi diagrams. Sphere or probe approaches are based on the positioning of probe spheres at protein surface and to identify clusters of spheres having some property representative of candidate pockets. SURFNET [8,21] positions gap spheres between any pairs of atoms, reduces their radii so that they do not intersect any atom, and retains spheres with a radius more than a given threshold. PASS coats the protein using small probes positioned from unique triplets of atoms, and then identifies candidate pockets using a "burial count" – a number of protein atoms within a distance of the probe – to exclude convex parts of the surface. Iterative coating of remaining buried parts further allows the detection of "active site points" that represent the centres of potential pockets. More recently, both Nayal et al. and Kawabata & Go have proposed approaches using two different probe sizes to identify cavities. Small probes are used to identify a collection of positions at protein surface whereas large probes are used as a means to select the small probes located in depressions at protein surface. Among approaches related to Voronoi diagrams, CAST [13] and APROPOS [10], extract from the Delaunay triangulation of the convex hull the so called alpha-shape – a subset of the triangulation from which Voronoi vertices and edges outside the molecule are omitted. The commercial package SiteFinder [33] uses the concept of alpha spheres – spheres that contact four atoms and do not contain any atom (see concepts) – to identify cavities. Finally, Kim et al. [26] have recently proposed another approach based on the identification of "pocket primitives" from Voronoi diagrams. In terms of availability, several of these approaches can be accessed via web servers (e.g. [34-36]), but very few packages are available for distribution. Some have been released as binaries (e.g. [14]), and for instance only the recently released PocketPicker [23] and LigSite(csc) [19] are available as open source softwares. There are a lot of research topics for which the availability of a free method can be

Read the complete text