Strain-induced alignment in collagen gels.
Vader D, Kabla A, Weitz D, Mahadevan L. · 2009
Read Strain-induced alignment in collagen gels. by Vader D, Kabla A, Weitz D, Mahadevan L. (2009) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/europmc-pmc2691583.txt.
Introduction
Vader, Kabla, Weitz, and Mahadevan studied in 2009 how collagen gels line up their fibers when stretched. Collagen is the body's most abundant structural protein, and its knack for remodeling under load gives tissues their toughness. The team built tools and a stretching rig that deforms gels the way cells deform their surroundings in the body.
As strain rose, fibers swung into line with the pull and packed denser, in both plain and chemically crosslinked gels. In plain gels the new order stayed after release, stamped in permanently. Crosslinked gels aligned just as much but sprang fully back. Stamping-in, then, is not the cause of alignment. The lining up is a built-in, nonlinear property of fiber networks themselves. The finding gives a simple physical route by which tissues could organize their own scaffolding at small scales.
Catalog record
| CREATOR | Vader D, Kabla A, Weitz D, Mahadevan L. |
|---|---|
| YEAR | 2009 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 46 KB |
| LICENSE | CC BY 4.0 |
| RIGHTS | CC BY |
| SOURCE | Europe PMC |
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Strain-Induced Alignment in Collagen Gels By David Vader, Alexandre Kabla, David Weitz, Lakshminarayana Mahadevan, Jörg Langowski Published in: PLoS ONE DOI: 10.1371/journal.pone.0005902 ABSTRACT Collagen is the most abundant extracellular-network-forming protein in animal biology and is important in both natural and artificial tissues, where it serves as a material of great mechanical versatility. This versatility arises from its almost unique ability to remodel under applied loads into anisotropic and inhomogeneous structures. To explore the origins of this property, we develop a set of analysis tools and a novel experimental setup that probes the mechanical response of fibrous networks in a geometry that mimics a typical deformation profile imposed by cells in vivo. We observe strong fiber alignment and densification as a function of applied strain for both uncrosslinked and crosslinked collagenous networks. This alignment is found to be irreversibly imprinted in uncrosslinked collagen networks, suggesting a simple mechanism for tissue organization at the microscale. However, crosslinked networks display similar fiber alignment and the same geometrical properties as uncrosslinked gels, but with full reversibility. Plasticity is therefore not required to align fibers. On the contrary, our data show that this effect is part of the fundamental non-linear properties of fibrous biological networks. INTRODUCTION Fiber networks, which arise in a range of natural and technological situations, are prime candidates for a wide spectrum of applications requiring tunable mechanical, transport and chemical properties [1]. In nature, these networks self-assemble to generate important structural and functional elements at various length scales: actin, intermediate filaments and microtubules are the main components of the cytoskeleton [2]; spectrin confers versatile qualities to red blood cell membranes [3]; fibrin is an essential element in hemostasis [4]; collagen is the main component of the extracellular matrix (ECM) in the animal kingdom [5] and cellulose is used by plants to build cell walls [6]. The mechanical function of biological fiber networks is essentially two-fold: (i) at the subcellular (actin, spectrin) and supracellular (collagen, fibrin) scales, the material offers little resistance and high sensitivity to small deformations, allowing it to be easily remodeled locally; (ii) at larger strains it stiffens strongly to ensure cell and tissue integrity [7]. The non-linear stiffening, while observed in many biological systems [8], [9], is not fully understood yet, with theories focusing on one of two broad mechanisms: (i) microstructural nonlinearities of individual filaments [8], and (ii) collective non-affine deformations of multiple filaments [10], [11]. To unravel the relative importance of these mechanisms, a range of experimental tools have been developed to quantify the network's mechanical non-linearity in systematic ways and relate the material micro-structure (network density and morphology, fiber behavior) to the mesoscopic stress-strain laws. These tools fall into two broad categories: simple shear in cone-plate or parallel plate geometries, and uniaxial/biaxial stretch. Simple shear deformations are commonly used to study purified protein networks. This technique requires low sample volumes and provides a consistent set of experimental tools and generic protocols to probe the visco-elastic properties of soft gels in both the small-strain (linear) and large-strain (non-linear) regimes, and in addition, normal stresses can be measured. Recent data collected by Janmey et al. [9] show in particular that sheared biopolymers exert negative normal forces, a fact that is in contradiction with the hyperelastic behavior of other well studied elastomers. The broad availability of experimental data in that geometry has encouraged a large number of related theoretical and numerical studies [12]–[14], focused primarily on the linear response of the material. However, since simple shear rheology assumes that the material undergoes purely isochoric deformations in the limit of small strains, it only allows for partial exploration of material behavior. In particular, these experiments do not allow one to study completely the non-linear regime (strain typically larger than 10%) that is most relevant in many biological situations (single cell or tissue deformation). And furthermore, it does not allow for a probe of the dilatational rheology of the networks. In contrast, at mesoscopic scales, uniaxial and biaxial testing are most common for tissue mechanical characterization [7], [15]–[17] and have been used to study reconstituted collagen networks [18]–[22], the simplest tissue equivalents [23]. In contrast with simple shear, uniaxial stretch generically leads to non-isochoric deformations, and hence allows one to measure quantities such as the material Poisson ratio which can have values as large as for strongly deformed collagen gels. These values arise in highly anisotropic materials, as reported for instance for solid foams [24], and it is somewhat surprising to see similar behavior in in vitro collagen gels which display little or no anisotropy in their undeformed state. To understand this, we recall that early studies [25] on cell/matrix interactions show that cells or groups of cells tend to generate tensile forces on the extracellular environment. When cell colonies were plated on fibrous materials such as collagenous gels, Harris and Stopak reported the formation of anisotropic and denser regions connecting these cellular assemblies, and showed that the matrix structure has a strong influence on cell motility. Although these observations are well accepted, little is known about the mechanical response of a fibrous matrix subject to an internal local strain. Neither of the mechanical characterizations described previously focus on how deformation changes the microstructure at the fiber scale, an issue of particular importance in the large strain regime, that is all too easy to observe (Figure 1). [Figure: Collagen gel morphological changes induced by presence of cells.(A) Single U87 glioblastoma cell in a collagen network 10 hours after gel polymerization. bar = 50 µm. (B) Several U87 cells on the surface of a collagen gel 10 hours after gel polymerization. bar = 200 µm. (C) Two cell colonies embedded in a collagen matrix 48 hours after gel polymerization. bar = 200 µm. Fibers (artificial red color) are imaged through confocal reflectance; cell nuclei (green) are labeled with a GFP-histone heterodimer.] In this paper, we use collagen type I gels as a model system to address this question and shed light on the morphological evolution of both the fiber and the network on an externally imposed stretching strain; although the expression “collagen fiber” traditionally refers to large bundles of collagen fibrils, we will here use the words “fiber” and “fibril” interchangeably in this paper to refer to the 0.5 micron diameter bundles. Collagen is a convenient biomaterial for biomechanical studies for a number of reasons: a) it is readily available in large amounts, which makes it suitable for milliliter-size gels; b) in vitro reconstituted networks have fibers that are easily identifiable using confocal microscopy; c) many of its properties have been extensively studied [18], [26]–[30]; d) the large diameter of the fibers (≈0.5 µm for collagen fibrils [21]) and the stability of the network [31], [32] make it easy to handle and image over a range of spatial and temporal scales; e) fibrillogenesis is conveniently controlled in vitro by pH, temperature and concentration [26], [28]. We first verified the presence of cell-induced alignments and densification with our experimental system. As shown in figure 1A, an isolated human glioblastoma cell (see Methods) in a collagen network induces stress variations and modifies the network texture in its vicinity [33], [34]. Several isolated cells on the surface of a collagen gel produce fiber alignment and