The effect of geometry on three-dimensional tissue growth.
Rumpler M, Woesz A, Dunlop JW, van Dongen JT, Fratzl P. · 2008
Read The effect of geometry on three-dimensional tissue growth. by Rumpler M, Woesz A, Dunlop JW, van Dongen JT, Fratzl P. (2008) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/europmc-pmc2495039.txt.
Introduction
Rumpler and co-authors examined in 2008 how physical shape steers the growth of new tissue. Cells respond to chemical signals, but the authors asked whether the geometry around them also matters. Their test system was bone-forming cells called osteoblasts growing inside an artificial three-dimensional matrix pierced by tiny channels.
The team found that the local growth rate of the tissue depended strongly on channel shape. Tissue grew fastest where surfaces curved, and cells reacted to curves with radii far larger than the cells themselves. Computer simulations matched the growth patterns seen under a confocal microscope, pointing to curvature and mechanical forces inside the tissue as the drivers. The findings bear on bone healing and on designing scaffolds for tissue engineering.
Catalog record
| CREATOR | Rumpler M, Woesz A, Dunlop JW, van Dongen JT, Fratzl P. |
|---|---|
| YEAR | 2008 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 36 KB |
| LICENSE | CC BY 4.0 |
| RIGHTS | CC BY |
| SOURCE | Europe PMC |
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
The effect of geometry on three-dimensional tissue growth By Monika Rumpler, Alexander Woesz, John WC Dunlop, Joost T van Dongen, Peter Fratzl Published in: Journal of the Royal Society Interface DOI: 10.1098/rsif.2008.0064 ABSTRACT Abstract Tissue formation is determined by uncountable biochemical signals between cells; in addition, physical parameters have been shown to exhibit significant effects on the level of the single cell. Beyond the cell, however, there is still no quantitative understanding of how geometry affects tissue growth, which is of much significance for bone healing and tissue engineering. In this paper, it is shown that the local growth rate of tissue formed by osteoblasts is strongly influenced by the geometrical features of channels in an artificial three-dimensional matrix. Curvature-driven effects and mechanical forces within the tissue may explain the growth patterns as demonstrated by numerical simulation and confocal laser scanning microscopy. This implies that cells within the tissue surface are able to sense and react to radii of curvature much larger than the size of the cells themselves. This has important implications towards the understanding of bone remodelling and defect healing as well as towards scaffold design in bone tissue engineering. Keywords: three-dimensional tissue formation, scaffold channels, bone tissue engineering, curvature-driven growth, osteoblasts 1. INTRODUCTION Cells react to the chemistry, geometry (Chen et al. 1997) and mechanics (Discher et al. 2005) of their local environments. In addition to the well-studied response of cells to biochemistry, the influence of mechanical parameters is well described for mesenchymal stem cells where it is possible to control the differentiation of these cells through substrate stiffness. Neuronal cells, for example, are formed on soft substrates, muscle cells on stiffer substrates and osteonal cells on more rigid matrices (Engler et al. 2006). The focal adhesion sites of the cells become more stable and the cell cytoskeleton more organized with increasing substrate stiffness, enabling larger forces to be transmitted (Discher et al. 2005). The cells appear to probe their local environment through the transmission of forces from the environment via the focal adhesion sites attached to the cytoskeleton (Balaban et al. 2001) and seem to be able to sense and transmit forces over long distances relative to their size (Bischofs & Schwarz 2003). The geometric arrangement of the local environment is also a critical factor in determining cell behaviour. It has been shown, for example, that both the chemical composition and the sub-cellular organization of focal adhesion molecules differ for cells grown in a three-dimensional matrix compared with those grown on a flat plate in two dimensions (Cukierman et al. 2001; Cavalcanti-Adam et al. 2007). On the micrometre scale, the geometry of adhesive regions controls the cell shape and the spreading of cells across a substrate (Chen et al. 1997). The cells also respond to variations in geometry on the nanoscale, and substrates patterned with different densities of integrin-coated nanodots show differences in the dynamics of focal adhesion and cell motility (Cavalcanti-Adam et al. 2007). The influence of surface geometry is well studied for the behaviour of single cells, but no data are available for the collective behaviour of groups of cells, namely at the tissue level. Such data are essential in tissue engineering to optimize the support for new tissue formation in artificial replacement materials. Scaffolds for tissue engineering act as a physical support structure to replace tissue removed after injury or cancer ablation, and ideally should regulate biological events such as cell proliferation, viability and intracellular signalling (Geiger et al. 2001; Geiger & Bershadsky 2002). Bone replacement materials, for example, should have an open porosity with channels of the order of a few hundred micrometres diameter. This not only allows for the migration of single cells into the scaffold but also provides sufficient space for the formation and growth of new tissue with a cellular and structural organization similar to that seen in vivo (Woesz et al. 2005; Rumpler et al. 2007). Studies investigating the effect of pore size at the micrometre level have focused on cell attachment, migration and cell division with respect to biocompatibility (Van Eeden & Ripamonti 1994). Pore channels in scaffold materials can vary between round and irregular cross-sections (Jin et al. 2000; Habibovic et al. 2005), but the effect of pore shape on tissue formation has not yet been investigated systematically. An understanding of the effect of geometry on tissue growth could assist in the optimization of porous scaffolds for tissue engineering as well as help improve understanding the processes of bone remodelling and healing. This paper investigates a model system for tissue growth consisting of three-dimensional hydroxylapatite (HA) plates of controlled architecture placed within a culture of murine osteoblast-like cells. These cells are known to undergo differentiation from an immature pre-osteoblastic to a mature osteoblastic phenotype in vitro, accompanied by the expression of characteristic marker proteins at each stage of development (Quarles et al. 1992). Furthermore, they are capable of building an extracellular matrix consisting of densely packed and well-organized collagen fibrils with representative non-collagenous matrix proteins known from bone tissue (Choi et al. 1996; Rumpler et al. 2007). The aim of this paper is to investigate the impact of geometrical features (channel shape and size) on new tissue formation in vitro. 2. MATERIAL AND METHODS 2.1 Production of the HA plates HA plates (2 mm thick) containing four channel shapes (triangular, square, hexagonal and circular) and three channel sizes (perimeter P=3.14, 4.71 and 6.28 mm) were produced by slurry casting. Casting moulds were designed using computer-aided design (CAD) software (Pro/Engineer PTC, USA) and produced using a three-dimensional wax printer (Solidscape, Model Maker II) as described in Manjubala et al. (2005). The moulds were then filled with a slurry of HA particles, dried in air and then heated to 600°C to remove the wax moulds. A final sintering treatment was performed at 1300°C for 1 hour (Woesz et al. 2005). 2.2 Cell culture Murine pre-osteoblastic cells, MC3T3-E1, were seeded with a density of 80 000 cells cm−2 on the surface of the HA plates and cultured in α-MEM (Sigma) supplemented with 10% foetal bovine serum, 30 μg ml−1 ascorbic acid and 30 μg ml−1 gentamicin in a humidified atmosphere, 5% CO2 at 37°C. 2.3 Visualization of actin stress fibres Cell cultures were washed with phosphate buffered saline, fixed with 4% paraformaldehyde, permeabilized with 0.1% Triton-X100 and incubated with 4×10−6 M phalloidin–fluorescein isothiocyanate for 30 min at 4°C. Images of the stress fibres were obtained using a confocal laser scanning microscope (Leica). 2.4 Quantification of the tissue area The projected tissue area was determined by transmission light microscopy in combination with image analysis for each channel and time point. 2.5 pO2 measurements Oxygen concentrations were measured using a fibre-optic oxygen micro-sensor with a tip diameter of approximately 30 μm (MicroxTX2, Presens, Regensburg, Germany; Van Dongen et al. 2003). The sensor tip was positioned within the channel closely against the growing tissue using a micro-manipulator (M3301, World Precision Instruments, Berlin, Germany) and a stereomicroscope (MZ6, Leica Microsystems, Bensheim, Germany). The measurements were done in a clean bench (Herasafe KS12, Heraeus, Germany) under sterile conditions and the same tissue was used for repeated oxygen measurements at a later time point. These values, expressed as a percentage of air-saturated buffer solution, were