Survival analysis part II: multivariate data analysis--an introduction to concepts and methods.
Bradburn MJ, Clark TG, Love SB, Altman DG. · 2003
Read Survival analysis part II: multivariate data analysis--an introduction to concepts and methods. by Bradburn MJ, Clark TG, Love SB, Altman DG. (2003) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/europmc-pmc2394368.txt.
Introduction
Bradburn, Clark, Love, and Altman continued their survival analysis series in 2003 with multi-factor methods. Single-factor comparisons can mislead, since groups often differ in age or stage as well as in the factor under study. This second part explains how statistical models separate those tangled effects.
The authors introduce models that estimate the effect of one or more predictors on survival at once. Central among them is the Cox proportional hazards model, which expresses each factor's effect as a hazard ratio, a multiplier on the risk of the event at any moment. They show how to read such ratios and their uncertainty ranges. The part builds on the first paper's curves and logrank tests, which compare groups without adjustment. Their stated aim was correct use: adjusting for the right factors, in the right way.
Catalog record
| CREATOR | Bradburn MJ, Clark TG, Love SB, Altman DG. |
|---|---|
| YEAR | 2003 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 27 KB |
| LICENSE | CC BY 4.0 |
| RIGHTS | CC BY |
| SOURCE | Europe PMC |
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Survival Analysis Part II: Multivariate data analysis – an introduction to concepts and methods By M J Bradburn, T G Clark, S B Love, D G Altman Published in: British Journal of Cancer DOI: 10.1038/sj.bjc.6601119 INTRODUCTION Survival analysis involves the consideration of the time between a fixed starting point (e.g. diagnosis of cancer) and a terminating event (e.g. death). The key feature that distinguishes such data from other types is that the event will not necessarily have occurred in all individuals by the time the study ends, and for these patients, their full survival times are unknown. For instance, in studies that measure the length of survival after diagnosis of cancer, it is common for a proportion of individuals to remain alive and disease-free at the end of the follow-up period, and for these patients, we know only a lower limit on their actual time to event. Thus, special methods are required for these type of data. The explanation and demonstration of some of the methods proposed to analyse such data are the basis of this series. In the first paper of this series (Clark et al, 2003), we described initial methods for analysing and summarising survival data including the definition of hazard and survival functions, and testing for a difference between two groups. We continue here by considering various statistical models and, in particular, how to estimate the effect of one or more factors that may predict survival. THE NEED FOR MULTIVARIATE STATISTICAL MODELLING The previous paper demonstrated the construction of (Kaplan–Meier) survival curves for different patient groups, and introduced the logrank test to investigate differences between them. Both these methods are examples of univariate analysis; they describe the survival with respect to the factor under investigation, but necessarily ignore the impact of any others. It is more common, at least in clinical investigations, to have a situation where several (known) quantities or covariates, potentially affect patient prognosis. For example, suppose two groups of patients are compared: those with and those without a specific genotype. If one of the groups also contains older individuals, any difference in survival may be attributable to genotype or age or indeed both. Hence, when investigating survival in relation to any one factor, it is often desirable to adjust for the impact of others. Moreover, while the logrank test provides a P-value for the differences between the groups, it offers no estimate of the actual effect size; in other words, it offers a statistical, but not a clinical, assessment of the factor's impact. The use of a statistical model improves on these methods by allowing survival to be assessed with respect to several factors simultaneously, and in addition, offers estimates of the strength of effect for each constituent factor. Therefore, statistical models are important and frequently used tools which, when constructed appropriately, offer valuable insight into the survival process. Several statistical methods have been proposed for modelling survival analysis data. We will describe the most important models and illustrate their application using example datasets described in the previous paper (Clark et al, 2003). As before, we will assume throughout that all survival times are independent of each other and that censoring occurs solely as right-censoring and is uninformative. The focus is on covariates that are measured at the time of entry to the study, that may be continuous (e.g. the patient age or tumour size), binary (e.g. gender), unordered categorical (e.g. histology) or ordered categorical or ordinal (e.g. performance status or FIGO stage). In the next paper in this series, we will discuss the statistical assumptions made when using statistical models, and provide advice on choosing the appropriate model and covariates therein. We will also consider how to model covariates that change values over time (called ‘time-dependent’ or ‘updated’ covariates). The methods we present here may be divided into two broad categories: proportional hazard approaches (including the semiparametric Cox model and fully parametric approaches) and accelerated failure time models. These methods have different properties and interpretations, but all may be used to summarise survival data. THE COX (‘SEMI-PARAMETRIC’) PROPORTIONAL HAZARDS MODEL The Cox (proportional hazards or PH) model (Cox, 1972) is the most commonly used multivariate approach for analysing survival time data in medical research. It is a survival analysis regression model, which describes the relation between the event incidence, as expressed by the hazard function and a set of covariates. A fuller explanation of the hazard function was given in the previous article (Clark et al, 2003). Put briefly, the hazard is the instantaneous event probability at a given time, or the probability that an individual under observation experiences the event in a period centred around that point in time. Mathematically, the Cox model is written as [formula: h(t)=h0(t) × exp{b1x1+b2x2+⋯+bpxp}] where the hazard function h(t) is dependent on (or determined by) a set of p covariates (x1, x2, …, xp), whose impact is measured by the size of the respective coefficients (b1, b2, …, bp). The term h0 is called the baseline hazard, and is the value of the hazard if all the xi are equal to zero (the quantity exp(0) equals 1). The ‘t’ in h(t) reminds us that the hazard may (and probably will) vary over time. An appealing feature of the Cox model is that the baseline hazard function is estimated nonparametrically, and so unlike most other statistical models, the survival times are not assumed to follow a particular statistical distribution. The Cox model is essentially a multiple linear regression of the logarithm of the hazard on the variables xi, with the baseline hazard being an ‘intercept’ term that varies with time. The covariates then act multiplicatively on the hazard at any point in time, and this provides us with the key assumption of the PH model: the hazard of the event in any group is a constant multiple of the hazard in any other. This assumption implies that the hazard curves for the groups should be proportional and cannot cross (see Figure 1 for examples of each). Proportionality implies that the quantities exp(bi) are called hazard ratios. A value of bi greater than zero, or equivalently a hazard ratio greater than one, indicates that as the value of the ith covariate increases, the event hazard increases and thus the length of survival decreases. Put another way, a hazard ratio above 1 indicates a covariate that is positively associated with the event probability, and thus negatively associated with the length of survival. This proportionality assumption is often appropriate for survival time data but it is important to verify that it holds. We discuss methods for assessing proportionality in the next paper in this series. [Figure: Example of (non-) proportional hazards (groups (c) and (d) only have proportional hazards) using the Weibull distribution. For the Weibull survival model, the hazard function h(t)=λs(λt)s−1 for λ, s>0: (a) increasing hazard (λ=0.5, s=1.25); (b) decreasing hazard (λ=0.25, s=0.75); (c) decreasing hazard (λ=0.5, s=0.5); (d) decreasing hazard (λ=0.25, s=0.5).] The Cox PH model fitted to the ovarian cancer data This large database, as described in the previous paper of this series (Clark et al, 2003), was used to derive a prognostic index for overall survival among ovarian cancer patients in Clark et al (2001).