A CELL FOR THE MEASUREMENT OF CATAPHORESIS OF ULTRAMICROSCOPIC PARTICLES.

Kunitz M. · 1924

Read A CELL FOR THE MEASUREMENT OF CATAPHORESIS OF ULTRAMICROSCOPIC PARTICLES. by Kunitz M. (1924) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/europmc-pmc2140650.txt.

Introduction

Kunitz, at The Rockefeller Institute for Medical Research, described a measuring cell in a 1924 paper. Cataphoresis, the drift of particles in an electric field, had a convenient cell from Northrop's design, built of cemented microscope slides. Kunitz modified that cell so it could measure particles of ultramicroscopic size, such as colloidal gold, which ordinary light cannot show.

The change lies in how the slides are cemented: a strong beam of light can pass through the front edge of the cell, lighting the tiny particles from the side. One slide is perforated with a shallow round depression, its edge ground back to a set gap from the opening. The paper gives the construction order, slide by slide, with the de Khotinsky cement used to join them.

Catalog record

CREATORKunitz M.
YEAR1924
COLLECTIONPAPERS
FORMATTXT
FILE SIZE6 KB
LICENSEPublic Domain
RIGHTSPUBLIC DOMAIN
SOURCEEurope PMC

Source: https://europepmc.org/articles/PMC2140650

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

A CELL FOR THE MEASUREMENT OF CATAPHORESIS OF ULTRAMICROSCOPIC PARTICLES

By M. Kunitz

Published in: The Journal of General Physiology

DOI: 10.1085/jgp.6.4.413

A CELL FOR THE MEASUREMENT OF CATAPHORESIS
OF ULTRAMICROSCOPIC PARTICLES.
BY M. KUNITZ.
(FromtheLaboratoriesof The RockefellerInstitutefor MedicalResearch.)
(Receivedfor publication,November26, 1923.)
In a recent publication Northropt describes a convenient cell for
microscopic cataphoresis measurements which can easily be made
by cementing together microscopic slides. The writer has modified
the cell so that it can be employed for measurements of cataphoresis
of particles of ultramicroscopic size such as colloidal gold, etc. The
modification consists in cementing slides in such a maimer as to
make it possible for a strong beam of light to pass through the front
edge of the cell. The diagrams in Fig. 1 show the construction of
the cell. The slides are lettered alphabetically in the order in which
they are cemented together by means of de Khotinsky cement.
Slide d is perforated and is made from an ordinary thick slide which
has a circular fiat depression in the middle. This depression is easily
cut away by means of a glass cutter and one edge of the slide is then
ground off, leaving a space of 1 ram. between the perforation and
the edge.
Construction of the Cell.--Slide b is cemented on top of Slide a,
leaving about 1.5 cm. of Slide a exposed. Slide c comes on top of
b, and then Slide d on top of Slide c, taking care that the ground edge
of d coincides in the same vertical plane with the exposed edge of
Slide a. The long front edge of the cell is ground smooth, and Slide e
is cemented to it. On top of Slide e come the blocks f and g, leaving
about 2 cm. of the middle portion of Slide e exposed. The ends of
the cell are then ground smooth, the inside of the cell is cleaned by
means of lens paper and acetone, and end-tubes are then cemented
on. The end-tubes consist of two short pieces (4 to 5 cm. long)
of thick-walled glass tubing, one end of which is widened and fiat-
1 Northrop, J. H., J. Gen.Physiol., 1921-22,iv, 629.
413
The Journal of General Physiology
414 CELL FOR MEASUREMENT 0]~ CATAPIIORESIS
A ~5
c
m
.
_~,~>/! /-L-d.
A
, --',BII...... F-l~- 5~.
U.__ . . 1 ~ t ~
e
B
Fro. 1..4, perspective view of the cell. B, transverse section through the
middle of the cell.
r~t.znso, s~.zns%
50I 501.
gu~ ~bing uw~ymp- c~
0vev[low Cowaste
Fro. 2. Longitudinal section through the cataphoresis apparatus.
~r. XUmTZ 415
tened and then ground smooth so as to fit well to the end of the cell.
As in the case of Northrop's arrangement, non-polarizable Zn-ZnSO4
electrodes are employed. The electrodes designed by Northrop
were slightly modified by adding reservoirs for saturated ZnSO4
solution, thus making it possible to renew readily the ZnSO, solution
around the zinc electrodes. Fig. 2 gives a sectional view of the
whole cell assembled, together with the modified zinc electrodes.
Calibration of the CelL--In employing the apparatus for cataph-
oresis measurements it is necessary to know the drop in potential
per cm. length of the part of the cell where the observations are
made, when a known E,M.~'. is applied to the terminals of the zinc
electrodes. The drop of potential per cm. length of the cell proper
can be calculated, with an approximation sufficient for the accuracy
of cataphoresis experiments, from the actual measurements of the
lengths and the inner cross-sectional areas of all the parts of the
apparatus used in the electric circuit, with the exception of the parts
containing saturated ZnSO4 solution. The resistance of saturated
ZnSO4 solution is very small in comparison with the electrolytes
usually employed in cataphoresis measurements; hence the potential
drop across the ZnSO4 portions of the circuit can be neglected. The
calculation of the drop per cm. length of the cell is based on the
principle that the drop per cm. length of a conductor of a non-uni-
form cross-section is inversely proportional to the cross-sectional
area of any part of the conductor. If ec and el are the drops per
cm. length of the cell, whose cross-sectional area is Ac, and of any
other part of the apparatus, whose cross-sectional area is A1, then
A~
el =ec~ I.
Hence
the total dropE .~ , Lc -t- L1 x AI L, x ~ + ......
in which L~, LI, L2, respectively, are the lengths in cm. of the various
A~ A,
parts of apparatus. If L1 x ~ and L~ x ~ respectively, are
designated as the equivalent lengths of the various parts of the
apparatus in terms of the length Lo of the cell proper, then the drop
416 CELL FOR ~EASUREMENT OF CATAPI-IORESIS
per unit length of the cell is equal to the total P.D. as measured by
a voltmeter connected across the terminals of the zinc electrodes
divided by the sum of all the equivalent lengths, or
E
ec--
Ac Ac
r-~+L, xz +z, xz + . . . . . .
Another formula for calculating the value of ecis given by Northrop
in his publication mentioned before, where the reader may find more
details as to the technique of operating the apparatus as well as to
the method employed in determining the actual velocity of electrical
migration of suspended particles.
The cell described here has been successfully employed for several
months, using a simplified Zsigmondy2 arrangement for obtaining
~a strong beam of light, which consists, (1) of a small Leitz arc lamp
which is using 4 to 5 amperes and which is provided with a clock
mechanism for leading the carbons,3 (2) of a double-convex lens,
and (3) of a microscope objective (Zeiss A) attached to a microscope
barrel. This is mounted in a horizontal position on a stand which
can be raised or lowered by means of a fine screw. A microscope
provided with a Zeiss objective of 16 ram. focal length and a No. 12
compensating ocular, in which a cross-sectional microscale is placed,
is used for taking observations.
The cell can also be used for ordinary microscopic cataphoresis
measurements by allowing light to reach the bottom of the cell as
usual. But the writer has found the ultramicroscopic method to be
of advantage even in cases of large microscopic particles, as it is
much easier to focus and less tiresome for the eye to make many
observations when the ultramicroscope method is employed than
using an ordinary microscope method.
Zsigmondy, R., Kolloidchemie, Leipsic, 2nd edition, 1918.
The arc lamp has been recently replaced in this laboratory, at the kind sug-
gestion of Dr. L. Waldo, by a convenient incandescent lamp supplied by the

Read the complete text