CoEx Electrode Structuring for High Energy and Fast Charging Lithium-Ion Batteries

Rao, Ranjeet, Shin, Dongyun · 2026

Read CoEx Electrode Structuring for High Energy and Fast Charging Lithium-Ion Batteries by Rao, Ranjeet, Shin, Dongyun (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/doe-osti-3424878-coex-electrode-structuring-for-high-ener.txt.

Introduction

SRI International closes award DE-EE0010223 with a final report on structured electrodes for fast-charging lithium-ion batteries. Ranjeet Rao led the project, with Dongyun Shin in the evidence record. The project ran from October 1, 2022 to March 31, 2025. Oak Ridge National Laboratory partnered on the work.

Pump tests tracked how fast electrode slurry reaches steady flow. Mass and flow rate were logged as the pump cycled on and off. Reaching steady state took considerable time, one key finding. Uneven coating early in a run can waste material. Battery plants need that timing knowledge to coat electrodes evenly at speed.

Catalog record

CREATORRao, Ranjeet, Shin, Dongyun
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE81 KB
LICENSEPublic Domain
RIGHTSPUBLIC DOMAIN
SOURCEDOE OSTI

Source: https://www.osti.gov/biblio/3424878

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Final Technical Report Date of Submission of Report: Federal Agency/ DOE/EERE/Advanced Materials & Manufacturing Organization Element Technologies Office (AMMTO) FOA Name and Number: DE-FOA-0002553 Award Number: DE-EE0010223 Award Type: Cooperative Agreement Project Title: CoEx Electrode Structuring for High Energy and Fast Charging Lithium-Ion Batteries Project Period: 10/01/2022 – 3/31/2025 Recipient Organization: SRI International 3333 Coyote Hill Road Palo Alto, CA 94304 Recipient Type: Non-Profit UEI Number: S2VPZDS5W6MS Principal Investigator: Dr. Ranjeet Rao Senior Member of Research Staff SRI International Email: [email protected] Business Contact: Ms. Lisa Wottrich Director, Contract Strategic Services SRI International Email: [email protected] Partners: Oak Ridge National Laboratory DOE Technology Manager: Brian Valentine, Title, [email protected] DOE Project Officer: Gibson Asuquo, [email protected] DISCLAIMER: This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States Government or any agency thereof. The views and opinions of authors expressed herein do not necessarily state or reflect those of the United States Government or any agency thereof. Document Availability: Reports are available free via the U.S. Department of Energy (DOE) Information Bridge Website: http://www.osti.gov/bridge Reports are available to DOE employees, DOE contractors, Energy Technology Data Exchange (ETDE) representatives, and Informational Nuclear Information System (INIS) representatives from the following source: Office of Scientific and Technical Information P.O. Box 62 Oak Ridge, TN 37831 Tel: (865) 576-8401 FAX: (865) 576-5728 E-mail: [email protected] Website: http://www.osti.gov/contract.html Contents Executive Summary: ................................................................................................................. 4 Introduction ................................................................................................................................. 5 Background ................................................................................................................................. 6 Results and Discussion.............................................................................................................. 8 Task 1: CoEx Ink Development (M1-M4).............................................................................. 9 Task 2: Electrochemical Modeling (M1-M3) ....................................................................... 11 Task 3: Develop Ink Feed Supply (M1-M8)......................................................................... 22 Task 4: Anode and Cathode Printing (M3-M14) .................................................................. 30 Task 5: Cell Assembly and Electrochemical Analysis (M8-M24) Not Finished ................. 39 Task 6: Techno-Economic Analysis (M19-M24) Incomplete .............................................. 41 Task Progress Summary ........................................................................................................... 41 Milestone Progress Summary ................................................................................................... 42 1. Key Achievements ........................................................................................................... 43 2. Benefits Assessment ......................................................................................................... 44 3. Lessons Learned............................................................................................................... 44 4. Conclusions ....................................................................................................................... 44 5. Future Work/Recommendations ....................................................................................... 44 6. Products............................................................................................................................. 45 7. References and/or Bibliography ...................................................................................... 45 Executive Summary: This project was a collaboration between SRI International (SRI) and Oak Ridge National Laboratory (ORNL) focused on advancing SRI’s CoEx technology for printing of battery electrodes, specifically for improving fast charging performance. Our proposed approach was predicted to deliver a 20% increase in energy density by enabling thick electrodes to operate with nearly the same performance as thin electrodes under fast charging conditions. As a drop- in replacement for the incumbent technology, slot die coating, it should be possible to upgrade coating lines to CoEx technology with minimal disruption to the rest of the line. In addition, the reduced solvent used in the CoEx process would deliver 15% cost savings and enable either 100% greater dryer throughput or 50% energy savings as compared to the state-of-the-art slot- die approach, reducing capital costs as U.S. manufacturing ramps up to meet expected demand for batteries for electric vehicles (EVs). These features align with the DOE-AMMTO goals of reducing industrial energy intensity, as total fabrication energy / kWh capacity will decrease. Prior work funded by the Vehicle Technologies Office (VTO) served as proof-of-concept for CoEx printing, with the scope limited to demonstrating that CoEx structuring in the cathode would improve discharge performance. In that work, a thick cathode was paired with an anode produced through conventional means (i.e.it had no structuring), and the baseline comparison was a cell with conventionally produced cathode and anode of similar loading, along with a lower loaded cell that was intended to represent cells of typical loading. The result of that work showed that the CoEx cells had higher energy density than the thin baseline cells, due to the thicker electrode layers, and had much higher power density than the thick baseline cells at higher discharge rates, because the CoEx cathode had higher performance than the conventional cathode. In this project, we proposed to extend the CoEx technology to structure both the anode and cathode of a lithium ion battery, resulting in at least a 20% increase in energy density under fast charging conditions, while reducing costs by 15% and cutting energy usage during production. Feedback from commercialization outreach after the VTO project led us to emphasize use of a more advanced cathode (NMC622 vs NMC522), to choose an aqueous formulation for the anode slurry, and to switch from our pneumatic pressure driven fluid delivery to a volumetric metering system that would be more compatible with long coating lengths. The division of project tasks reflected the strengths and capabilities of the two organizations. SRI has developed the CoEx technology, and has the facilities and expertise for doing process and slurry development. ORNL has the Battery Manufacturing Facility, a DOE-funded open- access battery manufacturing research and development center, which contains a dry room and a prototype coating line that we were able to convert for use with a CoEx printhead. Unfortunately, this dry room facility was unoperational for a large portion of the funded period of this project, which did affect the final outcome. Work at SRI focused on electrochemical modeling to identify target electrode geometries for improved performance, slurry and print process development for creating those geometries in both anode and cathode electrodes, and pump development for creating a CoEx-compatible metering system that is conducible to continuous coating. This equipment would be transferred to ORNL for a series of coating sessions that would produce structured cathode and anode electrodes. Independently, ORNL would produce conventional cathode and anode electrodes for baseline batteries using the same active materials as a comparison. Finally, ORNL would perform electrochemical testing to evaluate the batteries and determine the relative performance between CoEx-structured and baseline batteries. The results of this program are unfortunately inconclusive. Due to technical issues, we were not able to generate the full number of electrodes needed for full electrochemical testing, as will be further explained below. We continue to seek commercialization partners for this technology, and this project funding will help us achieve this. Introduction CoEx is a printing technology that enables high speed production of patterned thick films. The CoEx printhead takes two fluids as input, and interdigitates them before deposition, producing a finely patterned film consisting of alternating stripes of the two fluids (Figure 1). We have applied this technology to battery manufacturing, specifically in creating electrodes with structured porosity that improves performance. One limitation in increasing the charge or discharge capability in lithium ion batteries is how quickly ions can move from one electrode to the other. Thicker electrodes, while being energy-dense, present larger path lengths that inhibit charging. Another major factor is how tortuous the path is through the particle network that comprises the electrode. Tight packing with low porosity means that ions have to take a long

Read the complete text