High-Temperature SiC Cladding End Plug Irradiation Design and HFIR Readiness

Hott, Daniel, Russell, Nick, Cranford, Dillon et al. · 2026

Read High-Temperature SiC Cladding End Plug Irradiation Design and HFIR Readiness by Hott, Daniel, Russell, Nick, Cranford, Dillon et al. (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/doe-osti-3403168-high-temperature-sic-cladding-end-plug-i.txt.

Description

In August 2026, Oak Ridge National Laboratory released report ORNL/SPR-2026/4722, which sets out an irradiation test for silicon carbide end plugs used on fuel cladding. Daniel Hott, Nicholas Russell, Dillon Cranford, Takaaki Koyanagi, and Christian M. Petrie wrote the design study. The test will run in the High Flux Isotope Reactor, called HFIR.

Plugs will face a fast neutron flux at about 300 degrees Celsius, near light-water reactor heat levels. The goal is to check whether the plugs stay sealed and strong after irradiation. Thermal studies tune holder size and fill gas, using 90 percent helium in one case, to hold the right sample heat.

Catalog record

CREATORHott, Daniel, Russell, Nick, Cranford, Dillon et al.
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE51 KB
LICENSEPublic Domain
RIGHTSPUBLIC DOMAIN
SOURCEDOE OSTI

Source: https://www.osti.gov/biblio/3403168

Browse the full library · About the Tower of Babel