Evaluating Polymer Properties with Different Additives for Carbon Capture and Other Applications

Stiles, Patrick, Ye, Congwang · 2026

Read Evaluating Polymer Properties with Different Additives for Carbon Capture and Other Applications by Stiles, Patrick, Ye, Congwang (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/doe-osti-3399560-evaluating-polymer-properties-with-diffe.txt.

Introduction

Lawrence Livermore National Laboratory report LLNL-TR-2022582, dated August 2026, evaluates polymer properties with different additives for carbon capture and other applications. The author of record is Patrick Stiles of Brown University. He wrote under the Mickey Leland Energy Fellowship program, mentored by Conwang Ye of Livermore and Albert Dato of Harvey Mudd College. C. Ye also appears on the cover.

The motivation chapter sets the stakes in the student's own terms. Global temperatures have risen 1.29 degrees Celsius. Atmospheric carbon dioxide has reached 430 parts per million, a 50 percent increase over preindustrial levels. Polymers are candidate capture materials because their chemistry can be tuned. Additives are the tuning knobs. The project measured how different additives change the properties that matter for capture. The work is meant to narrow a wide materials field to promising recipes.

Catalog record

CREATORStiles, Patrick, Ye, Congwang
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE40 KB
LICENSEPublic Domain
RIGHTSPUBLIC DOMAIN
SOURCEDOE OSTI

Source: https://www.osti.gov/biblio/3399560

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

LLNL-TR-2022582 Evaluating Polymer Properties with Different Additives for Carbon Capture and Other Applications C Ye, P Stiles Aug 2026 This document was prepared as an account of work sponsored by an agency of the United States government. Neither the United States government nor Lawrence Livermore National Security, LLC, nor any of their employees makes any warranty, expressed or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States government or Lawrence Livermore National Security, LLC. The views and opinions of authors expressed herein do not necessarily state or reflect those of the United States government or Lawrence Livermore National Security, LLC, and shall not be used for advertising or product endorsement purposes. This work performed under the auspices of the U.S. Department of Energy by Lawrence Livermore National Laboratory under Contract DE-AC52-07NA27344. Author: Patrick Stiles (Brown University, MLEF Program) Mentors: Conwang Ye (Lawrence Livermore National Laboratory) and Albert Dato (Harvey Mudd College) LLNL-TR-xxxxxxxx This work was performed under the auspices of the U.S. Department of Energy by Lawrence Livermore National Laboratory under contract DE-AC52-07NA27344. Lawrence Livermore National Security, LLC. Evaluation of Polymer Properties with Different Additives for Carbon Capture and Other Applications 1. Motivation and Background Anthropogenic climate change is one of this generation’s most pressing concerns, with the potential to completely alter the delicate balance we’ve struck with nature. Already, global temperatures have risen 1.29°C, leading to disrupted weather systems, extinctions, increased risks of wildfires, and sea level rise, to name a few effects. Carbon dioxide emission from the combustion of fossil fuels and other industrial activity is a large driver of this phenomenon, as it absorbs heat before it can be radiated away from Earth, trapping it. Carbon dioxide has reached unprecedented levels in our atmosphere, showing a 50% increase from preindustrial averages to a whopping 430 ppm. Thus, reducing the amount of carbon dioxide via carbon capture technology is an important endeavor that serves to benefit everyone. Figure 1: Carbon dioxide emissions and atmospheric carbon dioxide levels since 1750 The Microencapsulated CO2 Sorbent (MECS) team at Lawrence Livermore National Laboratory (LLNL) has turned to microencapsulation to approach this endeavor. Microcapsules provide an attractive approach to carbon capture, combining large surface areas for more efficient mass transfer, regenerative abilities, reduced solvent loss, and improved handling. Additionally, while existing carbon capture technology relies on industrial plants, capsules could present a modular approach to carbon capture, reducing the need for extensive physical infrastructure. The MECS team’s design consists of a polymer membrane that contains a liquid carbon sequestering sorbent, aqueous sodium carbonate. The carbon capturing reaction occurs in three distinct steps, the first of which is the dissolution of carbon dioxide into the sorbent solution and its conversion into carbonic acid (H2CO3), shown in equations 1 and 2 respectively. Because this step hinges upon the ability of carbon dioxide to reach the solution inside the capsule, it is necessary that the microcapsule shell is permeable to carbon dioxide gas. Figure 2: In-air droplet encapsulation apparatus The MECS team produces these microcapsules using the in-air droplet encapsulation apparatus (IDEA) shown in figure 1, which can produce uniform micron- scale droplets at speeds much faster than traditional single-dispersal microfluidic-based techniques. The IDEA Is 100 times faster than these current techniques and can reach up to 1000 times their speed when incorporating a multi-nozzle design. Additionally, because droplets are produced in-air via vibration, IDEA can decrease post-processing times and material waste by 99% and can fabricate microgels that are 10 to 100 times more viscous than can be produced via traditional microfluidics. While this design represents a breakthrough in the throughput, efficiency, and tunability of microcapsule production, it imposes a major constraint on the microcapsule curing process. Because microcapsule shells are crosslinked with UV light while falling 30 cm through the air, this gives them a reaction window of approximately 0.2 seconds. Thus, the system and shell formulations must be optimized such that the shells can be fully crosslinked within this very narrow window, prompting investigations into curing behavior. 2. Materials and Mechanism 2.1 TEGO RAD The primary formulation component is TEGO RAD 2650, a silicone acrylate polymer. It is sold commercially by Evonik as a radically cross linkable release additive and possesses excellent slip and release properties, meaning it won’t stick to surfaces easily. It also has valuable defoaming properties, which prevents structural weakness and inhomogeneity from air bubbles in the final cure. TEGO RAD 2650 is a proprietary chemical, meaning that we are not provided with its exact chemical structure, but it has been cited as being similar in structure TEGO RAD 2100 and 2500, shown in figure 3. Figure 3: Assumed TEGO RAD 2650 general chemical structure Here, TEGO RAD 2650 is assumed to have a comparable structure to TEGO RAD 2100 and 2500. According to patent information, the molecular weights of TEGO RAD 2100 and 2500 range from 1000 to 2500 g/mol. Additionally, n ranges from 0.5 to 5, m ranges from 10 to 20, and the polymers are end-group functionalized with TMS. In all, this indicates that TEGO RAD 2650 is likely composed of short silicone acrylate chains with close control over TMS end groups 2.2 TPO-L Speedcure TPO-L from Arkema, chemical name ethyl phenyl(2,4,6- trimehtylbenzoyl)phosphinate, is a Norrish Type 1 photoinitiator from the phosphine oxide family with absorbance peaks at 274, 290, and 370 nm. This compound undergoes homolytic cleavage (α-cleavage) when exposed to UV light, breaking the carbon- phosphorous bond and generating a benzoyl and a phosphonyl radical that initiate crosslinking. TPO-L and its cleavage mechanism are displayed in figure 4. 365nm Figure 4: Radical generation chemical equation. The bond broken by UV light is circled in red. 2.3 Carbon Fillers This study employs the use of three carbon fillers to confer unique membrane permeability properties, namely carbon black, reduced graphene oxide, and gas- synthesized graphene. These have been chosen due to their hydrophobic properties and potential to facilitate CO2 transport, supporting their application in the carbon-capture process. 4. Results 4.1 Qualitative Curing Analysis Qualitative curing tests were employed to gain a general understanding of the impacts of light intensity, photoinitiator concentration, and oxygen inhibition on the formulation curing behavior. Qualitative curing tests allowed for the visualization of various formulations’ surface tackiness/greasiness and bulk brittleness under different conditions. While these results didn’t yield concrete data, they did provide valuable information regarding initial experimental direction and placed following quantitative findings in the context of these observations. This methodology employed the use of the Omnicure box, which contains a large UV lamp that emits light at 365 nm at a maximum (100%) power of 8.4 mW/cm2. Directly beneath the lamp within the box is a surface on which different formulations can be placed to undergo UV curing. The box has been fitted with a nitrogen inlet tube and has been sealed with electrical tape such that it enables UV operation under purge and

Read the complete text