Beamline Device Designators

Thornton, Remington Tyler · 2026

Read Beamline Device Designators by Thornton, Remington Tyler (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/doe-osti-3377121-beamline-device-designators.txt.

Introduction

Los Alamos National Laboratory memo LAMP-ENG-MOA-001, issued July 7, 2026 as LA-UR-26-25540, fixes how beamline devices get named at the LAMP project. R. Tyler Thornton of the Accelerator Operations and Technology division wrote it for LAMP and LANSCE management. Every magnet, gauge, and monitor needs a short code that control software can carry. Names that drift between crews cause real mix-ups. The memo sets one scheme and lists the codes in use.

Its ten-digit string descends from the old RICE system. The lab runs EPICS, which caps names at forty characters. Each LAMP beamline takes a two-letter code, or a letter and a digit. Injector A, code IA, handles the H-plus beam. Injector B, code IB, handles the H-minus beam and its short transport line. Injector C, for polarized protons, is marked not in use. Tables extend the list through the transport lines.

Catalog record

CREATORThornton, Remington Tyler
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE9 KB
LICENSEPublic Domain
RIGHTSPUBLIC DOMAIN
SOURCEDOE OSTI

Source: https://www.osti.gov/biblio/3377121

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

LA-UR-26-25540 Approved for public release; distribution is unlimited. Title: Beamline Device Designators Author(s): Thornton, Remington Tyler Intended for: Report Issued: 2026-07-07 Los Alamos National Laboratory, an affirmative action/equal opportunity employer, is operated by Triad National Security, LLC for the National Nuclear Security Administration of U.S. Department of Energy under contract 89233218CNA000001. By approving this article, the publisher recognizes that the U.S. Government retains nonexclusive, royalty-free license to publish or reproduce the published form of this contribution, or to allow others to do so, for U.S. Government purposes. Los Alamos National Laboratory requests that the publisher identify this article as work performed under the auspices of the U.S. Department of Energy. Los Alamos National Laboratory strongly supports academic freedom and a researcher's right to publish; as an institution, however, the Laboratory does not endorse the viewpoint of a publication or guarantee its technical correctness. Beamline Device Designators LAMP-ENG-MOA-001 Revision: 0 <LA-UR-26-xxxxx> <Date> Prepared for: LAMP and LANSCE Management Prepared by: R. Tyler Thornton, AOT Review and Approval Function Name Title Signature & Date REMINGTON Digitally signed by REMINGTON Author R. Tyler Thornton LAT Technical Lead THORNTON THORNTON (Affiliate) Date: 2026.06.25 14:54:11 -06'00' (Affiliate) Digitally signed by MARK AOT Deputy Division MARK GULLEY GULLEY (Affiliate) Approver Mark Gulley Leader/OPS Date: 2026.06.29 (Affiliate) 17:33:05 -06'00' Digitally signed by JOHN LEWELLEN (Affiliate) Approver John Lewellen Tehnical Director Date: 2026.06.30 08:54:15 -06'00' LAMP-ENG-MOA-001; Beamline Device Designators Los Alamos National Laboratory Page ii Rev. No. Date Description Affected Pages 0 6/23/2026 Initial Issue All LAMP-ENG-MOA-001; Beamline Device Designators Los Alamos National Laboratory Page iii Contents 1 Introduction ............................................................................................................................................ 3 2 LANSCE’s Device Designators ............................................................................................................. 3 3 LAMP Device Designator Interface Requirements ................................................................................ 4 4 Possible LAMP Conceptual Design and LAT Beamline IDs................................................................. 4 5 References .............................................................................................................................................. 5 Figures Figure 1: Device Designator nomenclature used at LANSCE ...................................................................... 3 Figure 2: LAMP Conceptual Design with possible Beamline IDs ............................................................... 5 Figure 3: LAT with possible Beamline IDs .................................................................................................. 5 Tables Table 1: Current LANSCE Line Designators with their definition, if they are in use, and notes about each line. ...................................................................................................................... 4 LAMP-ENG-MOA-001; Beamline Device Designators Los Alamos National Laboratory Page 1 Executive Summary LAMP is to replace the front-end of LANSCE. Therefore, the device designators for LAMP needs approval from LANSCE. This document defines the agreed upon device designator names to be used in LAMP and in the prototype beamline LAMP in ADEF Tunnel (LAT). LAMP-ENG-MOA-001; Beamline Device Designators Los Alamos National Laboratory Page 2 1 Introduction LAMP is designing a new front-end for the LANSCE accelerator. The device designators for the accelerator need to be consistent with LANSCE at the time of installation. LAMP-SE-RPT-001 [1] is the official LAMP Acronym list and LANSCE AOM 2.04 Attachment A [2] is the official Acronym and Abbreviation list for LANSCE Accelerator Operations. This document defines the agreed upon beamline device designators for LAMP and LAT in-order to interface with LANSCE at the time of installation. 2 LANSCE’s Device Designators From the LANSCE wiki [3] the designator for each device is defined as shown in Figure 1. Figure 1: Device Designator nomenclature used at LANSCE The ten-digit string is based off the old LANSCE Remote Instrumentation and Control Equipment (RICE) [4] system. Since LANSCE now runs the Experimental Physics and Industrial Control System (EPICS) [4] system, 40 characters are the maximum number allowed. It is outside of LAMP scope to change this format for the LANSCE accelerator. That means that each “beamline” in LAMP will be composed of a two-letter or one letter one number designator. The LANSCE lines have the designators listed in Table 1, where only pre-CCL lines are listed. Designator Definition In Use Notes IA Injector A, H+ beam Yes This only incorporates the equipment for the source IB Injector B, H- beam Yes This incorporates the equipment for the source and the short transport beamline in the dome before the C-W column (80 keV) IC Injector C, P- beam No TA Low Energy Transport A, H+ beam Yes Includes the C-W and the Transport afterwards (750 keV) TB Low Energy Transport B, H- beam Yes Includes the C-W and the Transport afterwards (750 keV) TC Low Energy Transport C, p- beam No Included the C-W and the transport up to the TB Inflector (750 keV) LAMP-ENG-MOA-001; Beamline Device Designators Los Alamos National Laboratory Page 3 TD Low Energy Transport D, all Yes All beam energies are 750 keV beams 01-48 Accelerator Modules 1-48 Yes The first 4 modules (DTL) accelerate the beam from 750 keV to 100 MeV. Modules 05-048 (CCL) accelerate the beam from 100 MeV to 800 MeV TR Transition Region Yes Region between the DTL and CCL ML Transition Region Main Line Partially Transports H+ Beam from DTL to CCL (currently H+ beam is diverted from ML to IP line at IPK101) CL Transition Region Center Line Yes Straight line between DTL and CCL for diagnostics and tuning ST Transition Region Sidetrack Yes Transports H- Beam from DTL to CCL with right phase advance IP Isotope Production Facility Yes Transports beam from the TR to IPF Target (100 MeV) Table 1: Current LANSCE Line Designators with their definition, if they are in use, and notes about each line. 3 LAMP Device Designator Interface Requirements The requirements for LAMP are given below: 1. LAMP designators shall fit within the 10-character designator currently used by LANSCE EPICS system as given in Figure 1. 2. LAMP shall not use any designators that remain after the LANSCE front-end is removed a. For example: The modules in the CCL will still be numbered 05 through 48. 3. LAMP could reuse the designators that no longer remain after the LANSCE front-end is removed a. For example: The LAMP H+ line may still be called TA. 4. If the number of LAMP DTL tanks exceeds 4 their designation will be D1-N with N being the number of tanks. 5. Each LAMP RFQ will have its own Beamline ID given by Q# with # being the number of the RFQ. a. This is because the device designators for the HPRF system, e.g. the 02JL is the Module 2 201 RF Amplifier Low Voltage Device, assumes each HPRF device is connected to a single Beamline ID. 6. The Medium Beam Energy Transport line that transports the beam from the RFQ to the DTL will have a different Beamline ID from Low Energy Beam Transport line that is before the RFQ. 7. LAT will use LAMP Beamline IDs. 4 Beamline Device Designators for LAMP/LAT With the above requirements Figure 2 demonstrates the agreed upon Beamline ID definition for LAMP/LAT. LAMP-ENG-MOA-001; Beamline Device Designators Los Alamos National Laboratory Page 4 Figure 2: LAMP design with agreed upon Beamline IDs. Figure 3 shows what the individual device designators are for the LEBT as an example. T1SO001 I1 T1BD001 T1SO002 T1CH001 T3BM001 T3SO001 Q1 Q1RQ I2 T2CH001 T2BD001 T2SO003 T2SO002 T3CH001 T2SO001 Figure 3: Shows individual device designators for the LEBT as an example. Q1 is the beamline ID for the RFQ region and Q1RQ is the RFQ device itself. 5 References [1] D. Spernjak, "LAMP-SE-RPT-001: LAMP Acronym Dictionary," LANL, Los Alamos, NM, 2025. LAMP-ENG-MOA-001; Beamline Device Designators Los Alamos National Laboratory Page 5 [2] LANSCE,

Read the complete text