Innovative Interfacial Engineering for Simultaneous Enhancement in Efficiency, Stability, and Reliability in Perovskite Devices

Padture, Nitin, Zhu, Kai, Berry, Joseph et al. · 2026

Read Innovative Interfacial Engineering for Simultaneous Enhancement in Efficiency, Stability, and Reliability in Perovskite Devices by Padture, Nitin, Zhu, Kai, Berry, Joseph et al. (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/doe-osti-3366701-innovative-interfacial-engineering-for-s.txt.

Introduction

Brown University's final report for DOE solar award DE-EE0009511 covers August 2021 to January 2025 work on perovskite solar cells. Nitin Padture led the project, with Kai Zhu and Joseph Berry among the collaborators. Perovskites promise cheap, efficient photovoltaics but degrade at their interfaces, where the light-absorbing layer meets charge-collecting contacts. The project engineered those interfaces to lift efficiency and stability together instead of trading one against another.

Self-assembled monolayer treatments and a fluorinated phenethylammonium iodide layer were combined on devices aged four days in the dark before measurement. Of 50 treated devices, 16 exceeded 21 percent power conversion efficiency. Charts of voltage, current, and fill factor document the spread, not just the champion cell. Interface chemistry, the results argue, is where perovskite durability will be won.

Catalog record

CREATORPadture, Nitin, Zhu, Kai, Berry, Joseph et al.
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE78 KB
LICENSEPublic Domain
RIGHTSPUBLIC DOMAIN
SOURCEDOE OSTI

Source: https://www.osti.gov/biblio/3366701

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Final Technical Report (FTR) Cover Page a. Federal Agency Department of Energy b. Award Number DE-EE0009511 Innovative Interfacial Engineering for Simultaneous Enhancement in Efficiency, Stability, and Reliability c. Project Title in Perovskite Devices d. Recipient Organization Brown University e. Project Period Start: 08/01/2021 End: 01/31/2025 Name: Nitin P. Padture Title: Otis E. Randall University Professor Email address: [email protected] f. Principal Investigator (PI) Phone number: (401) 863-2859 Name: Melissa Medeiros Title: Senior Grant & Contract Administrator Email address: [email protected] g. Business Contact (BC) Phone number: (401) 863-6170 Name Title h. Certifying Official (if different Email address from the PI or BC) Phone number 04/30/2025 Signature of Certifying Official Date By signing this report, I certify to the best of my knowledge and belief that the report is true, complete, and accurate. I am aware that any false, fictitious, or fraudulent information, misrepresentations, half-truths, or the omission of any material fact, may subject me to criminal, civil or administrative penalties for fraud, false statements, false claims or otherwise. (U.S. Code Title 18, Section 1001, Section 287 and Title 31, Sections 3729-3730). I further understand and agree that the information contained in this report are material to Federal agency’s funding decisions and I have any ongoing responsibility to promptly update the report within the time frames stated in the terms and conditions of the above referenced Award, to ensure that my responses remain accurate and complete. Page 1 of 54 1. Acknowledgement This material is based upon work supported by the U.S. Department of Energy's Office of Energy Efficiency and Renewable Energy (EERE) Solar Energy Technologies Office (SETO) under the [DE-FOA-0002357] Award Number [DE-EE0009511]. 2. Disclaimer This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States Government or any agency thereof. The views and opinions of authors expressed herein do not necessarily state or reflect those of the United States Government or any agency thereof. Page 2 of 54 3. Executive Summary The discovery of perovskite solar cells (PSCs) based on metal-halide-perovskite (MHP) thin-film light-absorbers in 2009,1 and further groundbreaking developments during 2012-14,2-8 sparked worldwide excitement in this photovoltaic (PV) technology. This has resulted in a rapid rise in the power conversion efficiency (PCE) of PSCs, from 3.8% since their invention in 2009,1 to the current certified record PCE of 26.7% for single-junction PV and 34.6% for tandem PV in 2024.9 What makes PSCs so promising is that they are processed at near-room temperatures, employ potentially scalable processes, and they use very small amounts of earth-abundant materials.10-12 Thus, the estimated energy-payback time and greenhouse-gas emission for PSCs is expected to be as low as ~0.09 years and ~13.35 g CO2 eq./KWh, respectively, relative to ~1.3 years and ~29.67 g CO2 eq./KWh for comparable state-of-art Si PV.13 Also, PSCs offer a significant opportunity to simplify and diversify the global supply chain for their manufacturing. Thus, PSCs have the potential for achieving the levelized cost of energy (LCOE) SETO goals of 0.02 to 0.05 $/kWh. However, there are several technical challenges in the path towards widespread commercialization of PSCs. The chief among them are durability/reliability and scalability. This project set out to address those challenges. The overarching objective of this project was to increase significantly the mechanical adhesion toughness of the key interfaces in PSCs, thereby improving the durability and reliability of PSCs and minimodules, while simultaneously enhancing their PCE. This is achieved by incorporating rationally-chosen self-assembled monolayers (SAMs) at key PSC interfaces. Inherently scalable methods for the deposition of MHP light-absorber thin films and SAMs are employed to ensure a viable path towards manufacturability. Furthermore, detailed understanding of mechanisms of PSCs and minimodules degradation, and SAMs-induced mitigation, is provided. As part of the project accomplishments, >60% increase in the adhesion toughness of the key PSC interfaces over their SAMs-free control counterparts was achieved. Also, PCEs >20% and >19% in rigid and flexible, respectively, single-junction PSCs (~1 cm2 area) were achieved. It was shown that <20% PCE loss in flexible PSCs with SAMs can be achieved after bend testing. It was demonstrated that T80 (80% retention of initial PCE) of >5,000 hours in rigid PSCs (~1 cm2 area) can be achieved. Comprehensive understanding of the degradation mechanisms in PSCs was obtained. These strategies were adopted towards developing minimodules. PCE of >21% was obtained in an 6-cm2 area minimodule, with T91 of 1,000 hours. Page 3 of 54 4. Table of Contents Page Number Cover Page 1 1. Acknowledgement 2 2. Disclaimer 2 3. Executive Summary 3 4. Table of Contents 4 5. Background 5 6. Project Objectives 5 7. Project Results and Discussion 9 8. Significant Accomplishments and Conclusions 50 9. Path Forward 51 10. Products 51 11. Project Team and Roles 52 12. References 52 Page 4 of 54 5. Background Tremendous progress has been made over the past decade in enhancing the power-conversion efficiency (PCE), operational-stability, and scalability of PSCs) based on MHP thin-film light absorbers.12,14,15 However, progress in mechanical reliability, which is also critically important for the overall durability of PSCs, has been limited.16-22 While there have been reports on enhancing adhesion toughness of interfaces in PSCs,16,19,23-33 it was demonstrated that there is a direct correlation between mechanical reliability, and both PCE and operational-stability in planar n-i-p rigid PSCs.34 The premise behind that effort was that stronger mechanical bonding between the various interfaces in a PSC can reduce the propensity for flaw nucleation (pores, cracks) during operation, and enhance the resistance to propagation of any such flaws at those interfaces, thereby preventing delamination.34,35 This was accomplished by significantly increasing the adhesion toughness of the interface between the SnO2 electron-transport layer (ETL) and the MHP thin film using a iodine-terminated silane-based self-assembled monolayer (SAM) — so-called ‘molecular glue.’34 Using this approach, in this project simultaneous enhancement in the PCE, operational-stability, and cyclic-fatigue life was achieved in planar n-i-p flexible PSCs on plastic substrates.36 Here, both interfaces, ETL/MHP and hole-transport layer (HTL)/MHP, were reinforced. The former was achieved by using the SAM,34 and the latter by using an in-situ-grown low-dimensional (LD) MHP at the HTL/MHP interface.37 While it is generally known that the use of mesoscopic ETL can improve the adhesion toughness in rigid n-i-p PSCs,26 in this project it was shown that the use of mesoscopic TiO2 (m-TiO2) atop the compact TiO2 (c-TiO2) ETL, together with the silane SAM, results in simultaneous enhancement in mechanical reliability, operational-stability, and PCE in rigid mesoscopic n-i-p PSCs.35 In comparison to n-i-p architecture, p-i-n PSCs show comparable efficiencies but are typically easier to fabricate, have improved stability, and are better suited for tandem photovoltaic (PV) applications. However, the important issue of mechanical adhesion of interfaces in p-i-n PSCs has not been addressed adequately. In this

Read the complete text