Mitigation documentation for the removal of hazardous materials from the engine installation vehicle and manned control car area 25, Nevada national security site, NYE county, Nevada
Stueve, Megan · 2025
Read Mitigation documentation for the removal of hazardous materials from the engine installation vehicle and manned control car area 25, Nevada national security site, NYE county, Nevada by Stueve, Megan (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/doe-osti-3365208-mitigation-documentation-for-the-removal.txt.
Introduction
Desert Research Institute cultural resources report DOE/NV/89233122CNA000255-46, prepared by Megan Stueve, documents historic preservation mitigation in Area 25 of the Nevada National Security Site. Before hazardous materials could be removed from two Cold War rail vehicles, the Engine Installation Vehicle and the Manned Control Car, federal law required recording their historic fabric. Two letter reports cover the vehicles one by one.
Mitigation followed the site's agreement: updated resource assessment forms with high-quality photographs, drawings, and a letter report on significance. The vehicles served the nuclear rocket program at the E-MAD facility. The Engine Installation Vehicle survives in good shape outside, with paint wear and surface rust from open storage on Spur B. The state preservation office let the work proceed in September 2025 after its response window passed.
Catalog record
| CREATOR | Stueve, Megan |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 91 KB |
| LICENSE | Public Domain |
| RIGHTS | PUBLIC DOMAIN |
| SOURCE | DOE OSTI |
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
DOE/NV/89233122CNA000255-46 DESERT RESEARCH INSTITUTE CULTURAL RESOURCES PROJECT NO. 257325 REPORT SERIES: MITIGATION DOCUMENTATION FOR THE REMOVAL OF HAZARDOUS MATERIALS FROM THE ENGINE INSTALLATION VEHICLE AND MANNED CONTROL CAR AREA 25, NEVADA NATIONAL SECURITY SITE, NYE COUNTY, NEVADA This report series includes the following: DOE/NV/89233122CNA000255-46a-MIT, LR070225-1-MIT Mitigation for the Removal of Hazardous Materials from the Engine Installation Vehicle in Area 25, Nevada National Security Site, Nye County, Nevada DOE/NV/89233122CNA000255-46b-MIT, LR070225-2-MIT Mitigation for the Removal of Hazardous Materials from the Manned Control Car in Area 25, Nevada National Security Site, Nye County, Nevada Nevada System of Higher Education DOE/NV/89233122CNA000255-46a-MIT DESERT RESEARCH INSTITUTE CULTURAL RESOURCES MITIGATION REPORT LR070225-1-MIT PROJECT NO. 257325 MITIGATION FOR THE REMOVAL OF HAZARDOUS MATERIALS FROM THE ENGINE INSTALLATION VEHICLE IN AREA 25, NEVADA NATIONAL SECURITY SITE, NYE COUNTY, NEVADA Prepared by Megan Stueve Division of Earth and Ecosystem Sciences MITIGATION FOR THE ENGINE INTALLATION VEHICLE The U.S. Department of Energy (DOE), National Nuclear Security Administration Nevada Field Office (NNSA/NFO), in consultation with the SHPO and the Advisory Council on Historic Preservation (ACHP), defined standard mitigation for undertakings adversely affecting contributing elements in historic districts in Appendix D of the NNSS PA. NNSA/NFO notified the SHPO of its intention to utilize the standard mitigation via letter dated August 5, 2025 (Huck) and the ACHP via their e106 filing system. The SHPO was not able to issue a timely response and advised NNSA/NFO to proceed to the next step of the PA (standard mitigation) in an email dated September 29, 2025 (De Antoni). Appendix D.I of the NNSS PA outlines standard mitigation for contributing elements in historic districts, such as the EIV. The mitigation consists of an updated Architectural Resource Assessment (ARA) form to document current conditions (Appendix D.I.A), including high-quality digital images (Appendix D.I.A.1) and plans, drawings, or annotated sketch plans (Appendix D.I.A.2), and a brief letter report describing mitigation contents and summarizing the historic significance (Appendix D.I.B). This mitigation report documents the completion of mitigation for the EIV in accordance with the NNSS PA Appendix D. An ARA Update form was prepared to satisfy NNSS PA Appendix D.I.A (see Attachment A). It includes a description of the historic property, high-quality digital photographs, and current annotated sketch plans with emphasis on the elements proposed for removal. DESCRIPTION OF THE ENGINE INSTALLATION VEHICLE The EIV was a critical component of the Railroad Transportation System (RTS) in the NRDS, a specialized group of three railcars designed and constructed to handle nuclear rocketry test objects (Drollinger 1999). A Manned Control Car (MCC) housed a crew of two personnel with controls tied through umbilicals allowing remote operation of adjoining cars. The EIV was designed to emplace and remove the nuclear engine or reactor from the test stands. The third element, the prime mover, provided the primary tractive force for the RTS. The prime mover (also known as the L1 locomotive) could be manned or unmanned and remotely operated from inside the MCC. After a test, the RTS retrieved the highly radioactive reactors and engines for disassembly and study. All three RTS specialty vehicles included radiation shielding and special safety and operating systems for these functions. Engine Installation Vehicle Mitigation Page 1 of 6 LR070225-1-MIT The EIV is about 50 feet long, 19 feet wide, and 30 feet tall. It weighs 70 tons and was able to carry 20 tons. The chassis is a flatcar with an added superstructure to hold the various test objects. It had the capabilities to move by inches the entire car back and forth in the test stand, level the reactor or engine by moving it back and forth and side to side, and precisely position the object in the test stand with various vertical and lateral carriages. Other equipment included a programmed and remote manipulator system, television cameras for viewing the operations, a load readout system, radiating monitor system, dust cover, and a nozzle closure actuator to install or remove the nozzle on the engine (O’Neill and Wedding 2022:23-24). The NRDS shuttered in 1973, but in 1977, the EIV received a new purpose when it was modified for use during spent fuel experiments on the NNSS. For these experiments, the EIV transported spent fuel casks and emplaced them in dry storage wells (O’Neill and Wedding 2022:23). The modifications to the EIV proposed in 2025 include removal of two elements: a stack of lead counterweights and the concrete transfer shield assembly which was added as part of the 1977 modifications (Figure 1). Transfer Shield Assembly Counterweights Figure 1. EIV showing hazardous materials to be removed, looking east (1905_1415; DRI 2019). The counterweights consist of seven weights stacked on top of one another near the rear of the EIV. Each is a 67 × 67 × 12-inch lead box filled with concrete. The stack is not parallel with the sides of the EIV but instead rotated 45 degrees to form a rough diamond shape in between two electrical cabinets. The weights are black with yellow stenciling on each side reading “5,000 LBS”. There is a large hook welded to the top of each corner of each of the counterweights to facilitate hoisting with a crane. The hooks are made using 1-inch diameter rods curved into a hook shape and angled out from the counterweight. The total length of each hook is 6 inches with the welded area totaling 3.5 inches and the exposed part of the hook measuring 2.5 inches from each corner. The bottom weight is welded to the deck of the EIV with angle brackets and further held stationary by the total weight above it. None of the other weights are currently welded together, although residual welding markings match locations in an engineering drawing showing Engine Installation Vehicle Mitigation Page 2 of 6 LR070225-1-MIT where they would have been connected at one time using pieces of plate iron. Atop the weights is a large steel cap measuring 67 × 67 x 8 inches. It also has large hooks on each corner, but they are angled upward. It is currently slightly askew and not flush with the counterweights. As described in O’Neill and Wedding, the EIV transfer shield was added in 1977 to minimize personnel radiation exposure during transfer of canisters from the hot bay to dry wells in a storage area as part of the spent fuel experiments at the Engine Maintenance Assembly and Disassembly (E-MAD) facility. The configuration of the transfer shield allowed for the entire spent fuel canister and the concrete shield plug to be picked up simultaneously for transfer to the dry well; together they were called the canister/shield plug assembly (Figure 2). Figure 2. Transfer shield at right on the EIV picking up a canister in E-MAD’s hot bay (best available image quality) (Unterzuber et al. 1982:B-25). The transfer shield was controlled by the MCC. The controls allow the drive system to move the transfer shield vertically, longitudinally, and laterally (Unterzuber et al. 1982:A-23). Other features include a winch to raise and lower the canister/shield plug assembly, and a foot valve to open and close the bottom of the shield during pickup and drop-off of the canister/shield assemblies (Unterzuber et al. 1982:A-23). The transfer shield assembly is made of two nesting carbon steel cylinders approximately