Subsurface Seismic Structural Characterization of the Hogback Monocline and Thermal Characterization of the San Juan Basin, New Mexico (AOI-2) (Final Research Report)

Martin, K. Luke, Reyes, Martin, Amosu, Adewale et al. · 2026

Read Subsurface Seismic Structural Characterization of the Hogback Monocline and Thermal Characterization of the San Juan Basin, New Mexico (AOI-2) (Final Research Report) by Martin, K. Luke, Reyes, Martin, Amosu, Adewale et al. (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/doe-osti-3025050-subsurface-seismic-structural-characteri.txt.

Introduction

Luke Martin of the New Mexico Bureau of Geology and Mineral Resources, with Martin Reyes, Adewale Amosu, and colleagues at New Mexico Tech. The team reports award DE-FE0032369, running December 2023 to November 2025 for the National Energy Technology Laboratory. The work characterizes the Hogback Monocline and the heat regime of the San Juan Basin in New Mexico, area of interest two. Such baselines matter where old oil and gas country is weighed for new subsurface uses.

Two data families anchor the study. Well logs give sharp, direct rock measurements at single boreholes, while seismic surveys cover the basin in three dimensions at lower resolution, tracing structure and rock boundaries. Chapters discuss joining the two, including machine learning pattern recognition for geophysical datasets where labeled training examples are scarce.

Catalog record

CREATORMartin, K. Luke, Reyes, Martin, Amosu, Adewale et al.
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE126 KB
LICENSEPublic Domain
RIGHTSPUBLIC DOMAIN
SOURCEDOE OSTI

Source: https://www.osti.gov/biblio/3025050

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Final Research Report Subsurface Seismic Structural Characterization of the Hogback Monocline and Thermal Characterization of the San Juan Basin, New Mexico (AOI-2) DE-FE0032369 DOE-FOA-0002799 Performance Period: 12/1/2023 - 11/30/2025 SUBMITTED TO U.S. Department of Energy National Energy Technology Laboratory SUBMITTED BY New Mexico Institute of Mining and Technology 801 Leroy Place Socorro, NM 87801 USA PRINCIPAL INVESTIGATOR Luke Martin Senior Petroleum Geologist New Mexico Bureau of Geology & Mineral Resources (NMBGMR) New Mexico Institute of Mining and Technology, Socorro, NM 87801 Phone: 575-835-5283, Email: [email protected] Co-Principal Investigators Dr. Adewale Amosu Dr. Sai Wang Petroleum Recovery Research Center (PRRC) New Mexico Institute of Mining and Technology, Socorro, NM 87801 Signature Date 08/14/2026 1 This material is based upon work supported by the Department of Energy under Award Number(s) DE-FE0032369. This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, Chapter 1 - Compiling Geological Data 1.1 - Evaluation of existing well log data Project researchers compiled all available open-source data from the New Mexico Oil Conservation Division (NMOCD) database within the study area (Fig. 1.1.1). Initially, these data consisted mainly of well logs and related information stored in TIFF, PDF, and JPG archive formats. All files were transferred to a regional project database and converted into digital LAS format. A total of 293 well logs were utilized in this project to achieve the primary objectives. Figure 1.1.1. Location of borehole logs employed during the execution of project DE- FE0032369. The red polygon is the project modeling area, and the stateline is in white. See Figure 1.1 for regional location. In addition, the team incorporated legacy data curated by the New Mexico Bureau of Geology and Mineral Resources (NMBGMR). Most of this information is unique and was originally transferred directly from industry sources to the NMBGMR. These legacy datasets, originally available as printed logs, were digitized and converted to LAS format. All datasets are stored in the main project database and were carefully filtered to remove duplicate files. The main objective of this project was to develop a subsurface structural model of the Hogback Monocline and to characterize the thermal properties of the SJB. To achieve this goal, all available 9 well logs were compiled within the study area. Because this work focuses on building a geological framework model, the primary inputs were logs that allow the identification of formation tops and lithology. The well logs used for lithology identification include gamma ray and spontaneous potential logs. Resistivity logs were interpreted to identify formation fluids, while neutron, density, and sonic logs were used to calculate petrophysical properties such as porosity and permeability. In addition, the team integrated data from different projects conducted by New Mexico Tech in recent years. With appropriate citations in the project references, these include the New Mexico Wells internal database, the NMBGMR database, previous CarbonSAFE project data, and unpublished NMOCD data. 1.2 - Evaluation of existing seismic data The team contacted the seismic vendor and reviewed the quality of the proposed seismic lines in January 2024 during a QA/QC round. Most of the 2D seismic lines owned by the vendor were reviewed and evaluated against several parameters, including location, coverage, data quality, acquisition parameters, and preliminary post-processing imaging. Seismic line selection was based on the spatial distribution of the seismic lines that best facilitate the construction of the structural model of the Hogback Monocline. Based on this evaluation, 10 2D seismic lines were selected for further processing (Fig. 1.2.1). Table 1.2.1 below summarizes the selected lines and their total mileage. 10 Figure 1.2.1. Location of the 2D seismic lines licensed (green lines). The existing 3D volume licensed for the San Juan Basin CarbonSAFE Phase III (green polygon) located at the northeastern side of the modeling area in red. 11 Table 1.2.1. Dimensions of the licensed 2D seismic lines. Beginning Shot Lines Point End Shot Point Miles AYH-1 3200 5098 29.672 EE-1 96 745 40.625 EE-2 6 520 39.015 EE-5 3 440 33.182 GBC-24 1 341 28.417 GBQ-12 2 399 16.583 GBQ-13 2 357 14.833 GDX-1 100 454 14.792 GDX-7 1 223 9.292 GJD-8 2 404 16.792 12 Figure 1.2.2. Raw data import, seismic line AYH-1. 1.3 - Licensing, Reprocessing, and Interpreting New 2D Seismic Data 1.3.1 - Licensing new seismic data The modeling team completed the seismic data evaluation and obtained licenses for 10 2D seismic lines to complement the existing interpreted 3D seismic data in the SJB. The licensed 2D seismic lines are distributed across the northwestern side of the SJB and cross the Hogback Monocline, the main geological structure expressed in the study area (Fig. 1.3.1). 13 Figure 1.3.1. Map showing the hillshade topography and the expression of the Hogback Monocline feature. The study area is outlined in red and the licensed seismic lines with labels are shown in blue. 1.3.2 - Processing seismic data The 2D seismic lines were processed by Agile Seismic LLC under the supervision of project members. The aim of this work was to reprocess multiple 2D land-seismic datasets in the SJB, New Mexico, primarily across the Hogback Monocline. These seismic data came from different surveys acquired primarily during the 1960s, with one seismic line acquired in 1973 and another in 1991. This reprocessing effort integrated all surveys into a single multi-2D seismic dataset, treating these lines as a pseudo-3D seismic survey where possible. The objective of this processing was to improve the seismic imaging of this legacy data for CCUS purposes, especially in areas near the injection wells. To improve seismic imaging quality, the team employed a combination of proven seismic processing and imaging technologies along with internal algorithms developed by Agile Seismic LLC. The main tools used in this reprocessing included Time-Frequency Domain (TFD) filtering, refraction and residual statics, and pre-stack and post-stack interpolation. The principal imaging methods were Kirchhoff pre-stack time migration (PSTM) and pre-stack depth migration (PSDM), as well as Gaussian Beam Migration (GBM) and Reverse Time Migration (RTM). The results of this seismic processing include multi-2D stacks (Stack, Post Stack Time Migration (PoSTM), and 14 Post Stack Depth Migration (PoSDM) stacks, PSTM, PSDM, GBM, and RTM gathers and stacks for each 2D seismic line. In addition, multi-2D velocities and stacks (PSTM and PSDM) were 3D- interpolated over the entire survey area to produce pseudo-3D PSTM and PSDM velocities and pseudo-3D PSTM and RTM stacks. The following processing flow was proposed in the bid and subsequently followed during the processing and imaging stages. 1. Geometry validation/correction/application/QC 2. Refraction Statics Calculation and Application 3. Spherical Divergence Correction 4. Denoising 5. Surface Consistent Scaling – 1st Pass 6. Surface Consistent Deconvolution 7. Surface Consistent Scaling - 2nd Pass 8. First Velocity Analysis 9. Surface Consistent Residual Statics - 1st Pass 10. Second Velocity Analysis 11. Surface Consistent residual Statics - 2nd Pass 12. * Trim Statics (Tested but not used) 13. Q-Compensation 14. 3D Interpolation of pre-stack 2D data (Tested but not used) 15. Final Velocity Analysis 16. Final Residual Denoising 17. Final Stacks 18.

Read the complete text