Methodology For Determining The Effective Aircraft Impact Area For Irregularly Shaped Facilities
Walker, William C. · 2026
Read Methodology For Determining The Effective Aircraft Impact Area For Irregularly Shaped Facilities by Walker, William C. (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/doe-osti-3023834-methodology-for-determining-the-effectiv.txt.
Introduction
William C Walker of Oak Ridge National Laboratory sets out a method for sizing the effective aircraft impact area of oddly shaped buildings, in report ORNL/TM-2026/4451, dated March 2026. Safety studies for nuclear and other guarded facilities must estimate where a crashing aircraft could actually strike. Rectangles are easy; real facilities with wings, annexes, and varied heights are not.
The method adjusts the impact area for a wing-strike-only event, where just a wingtip reaches the building. Six input parameters drive the calculation. Three describe the facility: its length, width, and height. The rest describe the aircraft, including performance and structural figures such as the mean skid distance. Worked figures walk through how the inputs combine into the final effective area.
Catalog record
| CREATOR | Walker, William C. |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 65 KB |
| LICENSE | Public Domain |
| RIGHTS | PUBLIC DOMAIN |
| SOURCE | DOE OSTI |
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
ORNL/TM-2026/4451 Methodology For Determining The Effective Aircraft Impact Area For Irregularly Shaped Facilities William C. Walker March 2026 ORNL IS MANAGED BY UT-BATTELLE LLC FOR THE US DEPARTMENT OF ENERGY DOCUMENT AVAILABILITY Reports produced after January 1, 1996, are generally available free via US Department of Energy (DOE) SciTech Connect. Website https://www.osti.gov. Reports produced before January 1, 1996, may be purchased by members of the public from the following source: National Technical Information Service 5285 Port Royal Road Springfield, VA 22161 Telephone 703-605-6000 (1-800-553-6847) TDD 703-487-4639 Fax 703-605-6900 E-mail [email protected] Website http://classic.ntis.gov/ Reports are available to DOE employees, DOE contractors, Energy Technology Data Exchange representatives, and International Nuclear Information System representatives from the following source: Office of Scientific and Technical Information PO Box 62 Oak Ridge, TN 37831 Telephone 865-576-8401 Fax 865-576-5728 E-mail [email protected] Website http://www.osti.gov/contact.html This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise, does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States Government or any agency thereof. The views and opinions of authors expressed herein do not necessarily state or reflect those of the United States Government or any agency thereof. ORNL/TM-2026/4451 Nuclear Facility Safety Division METHODOLOGY FOR DETERMINING THE EFFECTIVE AIRCRAFT IMPACT AREA FOR IRREGULARLY SHAPED FACILITIES William C. Walker March 2026 Prepared by OAK RIDGE NATIONAL LABORATORY Oak Ridge, TN 37831 managed by UT-BATTELLE LLC for the US DEPARTMENT OF ENERGY under contract DE-AC05-00OR22725 CONTENTS CONTENTS .................................................................................................................................................. ii LIST OF FIGURES ..................................................................................................................................... iii ABBREVIATIONS ..................................................................................................................................... iv ACKNOWLEDGEMENTS .......................................................................................................................... v ABSTRACT ................................................................................................................................................ vii 1. INTRODUCTION ................................................................................................................................ 1 2. BASELINE AND ROTATION PERSPECTIVES FOR A STRUCTURE AND ITS NODES ........... 4 2.1. Establishing the Baseline Impact Trajectory Orientation ..................................................................... 4 2.2. Rotating The Aircraft Impact Perspective Orientation ......................................................................... 5 3. DETERMINING THE EFFECTIVE AIRCRAFT IMPACT AREA OF A NODE ........................... 12 3.1. Re-ordering The Node Vertices .......................................................................................................... 12 3.2. Determining The Node-Specific Effective Aircraft Impact Area Vertices......................................... 12 4. DETERMINING THE OVERALL EFFECTIVE AIRCRAFT IMPACT AREA.............................. 17 4.1. Identifying The Vertices Associated With The Overall Effective Aircraft Impact Area ................... 17 4.2. Use Of Software Library Package Functions To Determine The Overall Effective Aircraft Impact Area ........................................................................................................................................ 18 4.3. Direct Analytical Solution For The Overall Effective Aircraft Impact Area...................................... 21 4.3.1. Identifying Overlapping Node Vertices .................................................................................... 21 4.3.2. Procedure For Determining If A Vertex Resides Within An Overlapped Area........................ 24 4.3.3. Procedure For Determining The Existence Of Overlap Vertices.............................................. 26 4.3.4. Using Line Segment Points To Determine Line Segment Intersection .................................... 28 4.3.5. Intersection of Two Line Segments .......................................................................................... 29 4.3.6. Determining The Intersection Point .......................................................................................... 29 4.3.7. Determining The Overall Effective Aircraft Impact Area ........................................................ 30 4.3.8. Ordering The Vertices Of The Overall Effective Aircraft Impact Area ................................... 30 4.3.9. Calculating The Overall Effective Aircraft Impact Area For A Specific Impact Trajectory............................................................................................................................................ 33 4.4. Evaluating The Overall Effective Aircraft Impact Area Associated With Many Trajectories ........... 34 5. CONCLUSION................................................................................................................................... 36 6. REFERENCES ................................................................................................................................... 37 ii LIST OF FIGURES Figure 1 - Illustration of Irregularly Shaped Facility With Identification Critical Area ............................... 2 Figure 2 - Critical Areas of a Facility Represented as Two Nodes in the Baseline Orientation Perspective ....................................................................................................................................... 4 Figure 3 - Concept of Cartesian Quadrants and Baseline Rotational Angle of Node Vertices..................... 7 Figure 4 - Rotating Node 1 by α Radians ..................................................................................................... 9 Figure 5 - Rotation of Node 2 by α Radians ............................................................................................... 10 Figure 6 - Illustration of the Rotation of Node 1 and Node 2 by α Radians ............................................... 11 Figure 7 - Illustration of the Effective Aircraft Impact Area (Baseline Perspective) ................................. 13 Figure 8 - Effective Impact Area for a Node .............................................................................................. 16 Figure 9 - Example of the Overlapping of Two Node-Specific Effective Aircraft Impact Areas .............. 18 Figure 10 - Merging Overlapping Polygons into a Single Closed Polygon Using sf Library Functions........................................................................................................................................ 20 Figure 11 - Identifying the Vertices Associated With Overall Effective Aircraft Impact Area ................. 22 Figure 12 - Flowchart for Assessing the Vertices of the Overall Effective Aircraft Impact Area .............. 23 Figure 13 - Example Evaluation of Vertices Residing Within a Node Specific Effective Aircraft Impact Area Polygon ..................................................................................................................... 24 Figure 14 - Logic Diagram for Assessing if a Point Resides Inside a Polygon .......................................... 25 Figure 15 - Illustration of Various Orientations of an Ordered Set of Triplet Points ................................. 27 Figure 16 - Visual Representation of the Cross-Product of Two Vectors .................................................. 27 Figure 17 - Evaluation of the Intersection of Two Line Segments Using the Ordered Triplet Orientation Method ........................................................................................................................ 29 Figure 18 - Ordering The Vertices By Angular Distance ........................................................................... 32 Figure 19 - Outline of Accurately Outlined Overall Effective Aircraft Impact Area Using Node- Based Barycentric Center .............................................................................................................. 33 Figure 20 - Outline of Inaccurately Outlined Overall Effective Aircraft Impact Area Using a Poorly Selected Center................................................................................................................... 33 iii ABBREVIATIONS C/C++ C and C++ programming languages DOE Department of Energy DOE-STD Department of Energy Standard GDAL Geospatial Data Abstraction Library GEOS Geometry Engine – Open Source GeoJSON Geographical JavaScript Object Notation format GIS Geographic Information Systems liblwgeom Lightweight Geometry library ORNL Oak Ridge National Laboratory PostGIS Spatial extension for PostgreSQL PostgreSQL Relational database system R R programming language sf Simple Features U.S. United States iv ACKNOWLEDGEMENTS The author is grateful for the support of the following which have contributed to the completion of this report: • The Oak Ridge National Laboratory (ORNL) for sponsoring the effort associated with the development of the effective impact area nodal model. • Dr. Alex Huning of ORNL for independently verifying the algebraic derivation of the nodal model and providing insightful comments regarding the existence of free, open-source software packages which perform the area union and intersection operations discussed in this report. His suggestion led to the inclusion of the simple features (sf) library package in this report. v This page intentionally left blank. vi ABSTRACT This report presents a computational methodology for determining the effective aircraft impact area for irregularly shaped facilities, extending the approach in Department of Energy (DOE) Standard 3014 by decomposing “critical areas” into multiple rectangular nodes rather than relying on a single bounding cuboid. This method reduces unnecessary conservatism that can arise when non-critical space is enveloped by a single footprint. The facility’s critical areas are partitioned into nodes of constant height, a baseline aircraft impact trajectory is established, and the facility perspective is rotated to accommodate arbitrary heading angles. For each node, analytic expressions are provided to construct the node-specific effective impact polygon that accounts for skid distance, structural footprint, fly-in (shadow) region driven by building height and descent angle, and wingspan offsets capturing wing-only strikes. When multiple nodes are present, their effective impact polygons generally overlap. The report offers two paths to obtaining the overall effective impact area without double counting: (1)