GEANT3 simulations for a beryllium Moderator for the Neutron Target Demonstrator (NTD)
Dellmann, Sophia Florence, Reifarth, René, Cooper, Andrew Leland et al. · 2025
Read GEANT3 simulations for a beryllium Moderator for the Neutron Target Demonstrator (NTD) by Dellmann, Sophia Florence, Reifarth, René, Cooper, Andrew Leland et al. (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/doe-osti-3005575-geant3-simulations-for-a-beryllium-moder.txt.
Introduction
Sophia Florence Dellmann, René Reifarth, Andrew Leland Cooper, Aaron Joseph Couture, Caroline Harrington, and Ingrid Knapova simulate a neutron source part in Los Alamos report LA-UR-25-31426, issued November 20, 2025. The Neutron Target Demonstrator will make neutrons by spallation, slow them in a moderator, and use them to measure reactions on short-lived nuclei for astrophysics.
The existing moderator is an 80-centimeter carbon block. The proposed design puts a beryllium core, built from pieces already at Los Alamos, inside the carbon. GEANT3 simulations with 800 MeV protons striking a tungsten target show the beryllium core raises the moderated neutron density in the central beam pipe by roughly a factor of four. Layer-by-layer assembly steps for the beryllium pieces close the report.
Catalog record
| CREATOR | Dellmann, Sophia Florence, Reifarth, René, Cooper, Andrew Leland et al. |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 24 KB |
| LICENSE | Public Domain |
| RIGHTS | PUBLIC DOMAIN |
| SOURCE | DOE OSTI |
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
LA-UR-25-31426 Approved for public release; distribution is unlimited. Title: GEANT3 simulations for a beryllium Moderator for the Neutron Target Demonstrator (NTD) Author(s): Dellmann, Sophia Florence Reifarth, Rene Cooper, Andrew Leland Couture, Aaron Joseph Harrington, Caroline Knapova, Ingrid Intended for: Report Issued: 2025-11-20 Los Alamos National Laboratory, an affirmative action/equal opportunity employer, is operated by Triad National Security, LLC for the National Nuclear Security Administration of U.S. Department of Energy under contract 89233218CNA000001. By approving this article, the publisher recognizes that the U.S. Government retains nonexclusive, royalty-free license to publish or reproduce the published form of this contribution, or to allow others to do so, for U.S. Government purposes. Los Alamos National Laboratory requests that the publisher identify this article as work performed under the auspices of the U.S. Department of Energy. Los Alamos National Laboratory strongly supports academic freedom and a researcher's right to publish; as an institution, however, the Laboratory does not endorse the viewpoint of a publication or guarantee its technical correctness. GEANT3 simulations for a beryllium Moderator for the Neutron Target Demonstrator (NTD) Sophia F. Dellmann1 , René Reifarth1 , Andrew L. Cooper1 , Aaron Couture1 , Caroline M. Harrington2 , and Ingrid Knapova1 1 Los Alamos National Laboratory, Los Alamos, New Mexico, USA 2 Air Force Institute of Technology, OH, USA Abstract Measurements of neutron-induced reactions, particularly on short-lived nuclei, are crucial for nuclear astrophysics and applications. The Neutron Target Demonstrator (NTD) aims to address this by using a strong mod- erated spallation neutron source coupled with an ion storage ring. This work investigates the potential of improving the neutron moderator, a key component of the NTD. Using GEANT3 simulations, we compare the performance of the existing 80 cm carbon moderator with a new moder- ator design, which utilizes beryllium pieces available at LANL to form a core surrounded by carbon. Simulations were performed 800 MeV pro- tons incident on a tungsten target. The results demonstrate that the beryllium-core moderator increases the density of moderated neutrons within the central beam pipe by roughly a factor 4 compared to the pure carbon moderator. This enhancement makes the beryllium-core design a very promising option for future experiments focused on neutron-induced measurements in inverse kinematics. 1 Contents 1 Introduction 3 2 Moderator Geometries and Simulation Setups 3 2.1 Moderator Configurations . . . . . . . . . . . . . . . . . . . . . . 3 2.2 Simulation Parameters . . . . . . . . . . . . . . . . . . . . . . . . 7 3 Simulation Results and Discussion 8 3.1 Neutron Flux and Time Structure in Full-Cube Geometry . . . . 8 3.2 Simulated Reaction Yields . . . . . . . . . . . . . . . . . . . . . . 11 4 Conclusion and Outlook 12 5 Supplement 14 2 1 Introduction The Neutron Target Demonstrator (NTD) provides a new opportunity to mea- sure neutron-induced reactions in inverse kinematics [1]. Measurements of neutron-induced cross sections are important for understanding the nucleosyn- thesis of elements beyond iron, as well as for several applications. Current methods are often limited by the half-life and the corresponding activity of the target isotopes [2, 3, 4]. This limitations can be overcome by combining a spallation-driven, moderated neutron source with an ion storage ring, which allows experiments to be performed in inverse kinematics [5]. First proof-of-principle experiments have been successfully performed within the NTD project [6]. These experiments, and their corresponding GEANT-3 simulations [7], have utilized a cubical carbon moderator with an 80 cm side length. A potential path to improving the neutron density is the use of different mod- erator materials [8]. Beryllium is a prime candidate, as it has been shown to be a superior moderator to carbon for spherical systems smaller than 2.5 m in diam- eter and 800 MeV proton energy [8]. This report presents the results of detailed GEANT3 simulations for a new moderator configuration based on beryllium (Be) pieces available at the Los Alamos Neutron Science Center (LANSCE), comparing its performance to the existing carbon moderator. 2 Moderator Geometries and Simulation Setups The simulations in this work investigate several moderator configurations based on materials available at LANL. All setups share common features: neutrons are produced from a tungsten target located at the center of the moderator, and the analysis focuses on the neutron properties within a central, air-filled ion beam pipe, which represents the interaction region for future inverse kinematics experiments. 2.1 Moderator Configurations The configuration of the moderator used in the experiments so far was a pure carbon (C) Moderator. It is a cube of approximately 80 cm side length, with a total volume of 0.481 m3 , which was constructed of of 2 types of carbon pieces - (76.3 x 10.8 x 10.8) cm3 and (16.8 x 10.8 x 10.8) cm3 (see [1, 6] for details). The alternative design is a beryllium-core/carbon (Be+C) moderator. This design was driven by the inventory of available beryllium pieces at LANSCE, listed in Table 1, whose total volume (0.151 m3 ) is significantly less than that of the carbon moderator. To create a large-volume moderator, these Be pieces were arranged to form a central core (approx. 55 x 55 x 55 cm3 ), which was then surrounded by 26 of the existing graphite blocks. The assembled moderator has nearly the same outer dimensions as the pure carbon moderator consisting of 54 carbon pieces. A beryllium density of 1.84 g/cm3 was used in the simulations. 3 All three combination, pure Be, Be core and C shell (Be+C) and pure C, of moderator materials were simulated. Table 1: List of beryllium and carbon moderator pieces, used in the simulations and available at LANL. 26 carbon blocks were used to build the outer shell of the Be+C configuration while 54 were used for the pure C moderator. Material Geometry (cm x cm x cm) Amount beryllium 7.3 x 7.3 x 40.6 41 beryllium 7.3 x 2.4 x 40.6 34 beryllium 7.3 x 3.6 x 40.6 17 beryllium 2.4 x 7.3 x 40.6 9 beryllium 7.3 x 7.3 x 10.16 4 beryllium 7.3 x 7.3 x 2.5 42 beryllium 7.3 x 2.4 x 20.3 16 beryllium 7.3 x 3.6 x 10.1 2 Carbon 76.3 x 10.8 x 10.8 26,54 Table 2: Outer dimensions of the simulated moderators in full-cube configura- tions. Setup Geometry (cm x cm x cm) Amount Be 55 x 55 x 55 Figure 1 Be+C 77 x 77 x 77 Figure 2 C 77 x 77 x 88 Figure 3 Figure 1 shows a schematic drawing of the simulated beryllium core, made with the pieces available at LANL. Because of the variety of different sizes of the beryllium pieces, small gaps are unavoidable. Compared to the carbon moderator used for previous experiments, consisting only of 2 different types of block sizes, it is less compact. The length of the simulated cubical beryllium core is around 55 cm. For the Be-C moderator, a layer of carbon pieces has been added surrounding the beryllium moderator. As a result, the Be+C moderator has almost the same outer dimensions