Simulating Marine Stratocumulus Clouds using Lagrangian Superdroplet Method in ERF

Mirocha, Jeffrey, Beydoun, Hassan, Kendrick, Coleman et al. · 2025

Read Simulating Marine Stratocumulus Clouds using Lagrangian Superdroplet Method in ERF by Mirocha, Jeffrey, Beydoun, Hassan, Kendrick, Coleman et al. (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/doe-osti-2584743-simulating-marine-stratocumulus-clouds-u.txt.

Introduction

Lawrence Livermore National Laboratory report LLNL-TR-2008186, by Jungmin Lee, Jeffrey Mirocha, Hassan Beydoun, and Coleman Kendrick in July 2025, tests a new way to simulate marine stratocumulus clouds. These low cloud decks are common over offshore and coastal wind energy regions. The team added a Lagrangian superdroplet method to the Energy Research and Forecasting model, so the model tracks individual superdroplets instead of using a bulk scheme.

The authors benchmarked the new version against the model's Kessler bulk scheme, other large-eddy simulations, and observations from the DYCOMS-II RF02 drizzling cloud case. Both versions produced persistent cloud decks matching the other models. Only the superdroplet version produced the observed drizzle, though it made too much of it. The result matters for predicting how wind plants interact with coastal clouds.

Catalog record

CREATORMirocha, Jeffrey, Beydoun, Hassan, Kendrick, Coleman et al.
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE18 KB
LICENSEPublic Domain
RIGHTSPUBLIC DOMAIN
SOURCEDOE OSTI

Source: https://www.osti.gov/biblio/2584743

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

LLNL-TR-2008186 Simulating Marine Stratocumulus Clouds using Lagrangian Superdroplet Method in ERF C Kendrick, H Beydoun, J Mirocha, J Lee July 2025 This document was prepared as an account of work sponsored by an agency of the United States government. Neither the United States government nor Lawrence Livermore National Security, LLC, nor any of their employees makes any warranty, expressed or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States government or Lawrence Livermore National Security, LLC. The views and opinions of authors expressed herein do not necessarily state or reflect those of the United States government or Lawrence Livermore National Security, LLC, and shall not be used for advertising or product endorsement purposes. This work performed under the auspices of the U.S. Department of Energy by Lawrence Livermore National Laboratory under Contract DE-AC52-07NA27344. Simulating Marine Stratocumulus Clouds using Lagrangian Superdroplet Method in ERF Jungmin Lee1, Jeffrey Mirocha1, Hassan Beydoun1, and Coleman Kendrick1 1Lawrence Livermore National Laboratory, Livermore CA, USA 1. Summary This study investigates the simulation of marine stratocumulus (stratoCu) clouds – common in many offshore and coastal wind energy regions - using Lagrangian Superdroplet Method (SDM) implemented in Energy Research and Forecasting (ERF) model. Developed by the Wind Energy Technologies Office (WETO), ERF is a high-resolution atmospheric modeling tool that relies on traditional bulk microphysics schemes. Under an LLNL-led Laboratory Directed Research and Development (LDRD) project, SDM was integrated into ERF to improve cloud process fidelity by explicitly tracking individual “superdroplets”. This enables a realistic representation of the droplet size spectrum, cloud-atmosphere interactions, and potential feedbacks from wind plants on atmospheric flow and cloud structure. To evaluate performance, ERF-SDM was benchmarked against ERF with Kessler bulk microphysics scheme (Kessler, 1969), other large-eddy simulation (LES) models, and observational data from the DYCOMS-II RF02 campaign - a well-documented drizzling marine stratocumulus event. Both ERF-SDM and ERF-Kessler produced persistent stratocumulus decks consistent with other LES models. Notably, SDM uniquely captured observed drizzle that bulk schemes did not. Although SDM tended to overproduce drizzle, this was attributed to its explicit sedimentation and the absence of aerosol replenishment, leading to fewer but larger droplets over time (Twomey effect). Consequently, simulations showed reduced cloud fraction, lower liquid water path, and weaker planetary boundary layer (PBL) turbulence relative to Kessler scheme. This work highlights the value of physically based microphysics for simulating cloud processes relevant to offshore wind forecasting. It also identifies the need for improvement, such as aerosol replenishment, to better align model results with observations. Overall, ERF- SDM shows strong potential for advancing marine cloud modeling for wind energy applications. 2. Method a. Model frameworks To address the challenge of accurately simulating marine stratocumulus (stratoCu) clouds and their interactions with offshore wind energy systems, this study utilized Energy Research and Forecasting (ERF) model. ERF is a next-generation, open- source regional atmospheric modeling tool developed to meet the needs of the wind energy, atmospheric science, and environmental research communities. ERF is performance portable across CPUs and GPUs, supporting both fully compressible and anelastic equation sets for atmospheric flows. It includes advanced physics models for 1 turbulence (LES, PBL), microphysics (Kessler, SAM 1-Moment, Morrison 2-moment, SDM), and wind turbine modeling (Fitch and Actuator Disk Model). A novel Lagrangian Superdroplet Method (SDM: Shima et al., 2009) was integrated into ERF to enhance the representation of cloud microphysics, including condensation/evaporation, collision-coalescence, sedimentation and droplet activation. SDM is a particle-based, Lagrangian approach for simulating cloud and precipitation microphysics in atmospheric models. Unlike traditional bulk scheme, SDM explicitly tracks the evolution of individual “superdroplets”, each representing a large number of real droplets with identical physical and chemical properties such as position, velocity, terminal velocity, radius, aerosols and their masses. As a result, SDM can resolve the full droplet size spectrum, not just mean or bulk properties, making the method more physically based. b. Case study setup To rigorously evaluate the performance of ERF model coupled with the Superdroplet Method (ERF-SDM), we validated its output against established large- eddy simulation (LES) models and available observational data. This benchmarking process is essential to ensure that ERF-SDM can reliably simulate the complex processes governing marine stratocumulus (stratoCu) clouds, which are critical for understanding the wind resource variability and atmospheric boundary layer dynamics off the coast of California. A central focus of the assessment was to determine the ability of ERF-SDM to capture key features of marine stratoCu, including the formation of drizzle, the structure and intensity of turbulence, and the representation of cloud optical properties. ERF-SDM system was compared with the traditional Kessler bulk microphysics scheme. This comparison allowed for a detailed analysis of both microphysical and dynamical outcomes, highlighting differences in drizzle rates, boundary layer stratification, and cloud optical depth between the Lagrangian (SDM) and bulk (Kessler) approaches. The validation experiments were conducted benchmarking the DYCOMS-II Research Flight 02 case, a well-documented event involving drizzling marine stratocumulus clouds. We followed the case setup documented in Ackerman et al. (2009). The simulation domain was configured as a 1.6 km × 1.6 km × 1.6 km, with a horizontal grid spacing of 50 meters and a vertical resolution of 5 meters to resolve fine-scale boundary layer processes. This configuration follows the set up used in a similar study by Yin et al. (2024), which demonstrated that this resolution produced reasonable results. A simplified interactive radiation model was integrated into ERF- SDM, accounting for cloud top cooling, cloud base warming, and free tropospheric cooling, all of which are critical for maintaining realistic cloud dynamics. Surface heat fluxes (sensible heat flux = 16 W/m2 and latent heat flux = 93 W/m2) and subsidence warming which balances the radiation cooling at cloud top (assuming large scale horizontal winds of 3.75e-6 s-1) were prescribed to match observational constraints. For 2 microphysical representation, both the Kessler bulk scheme and the Lagrangian SDM were employed, with the latter leveraging two log-normal distributions of ammonium bisulfate aerosol as cloud condensation nuclei (CCN). The total number concentrations for the two modes are 125 and 65 cm-3 with the mode radii and geometric standard deviations of 0.011 and 0.06 m, and 1.2 and 1.7, respectively. The simulation is run for 6 hours. The detailed case set up can be found in Ackerman et al. (2009). 3. Key Findings Figure 1. Time series of (a) liquid water path (kg/m2) and (b) cloud fraction. The red line denotes results from ERF-Kessler, while the blue line indicates results from ERF-SDM. The light grey region marks the minimum and maximum range of other LES model ensemble, while the dark grey region marks the 25th and 75th percentile of the ensemble. Dotted lines for the liquid water path mark the measured range. a. Overview Figure 1 shows the liquid water path (vertically integrated cloud water and precipitation mixing ratio) and cloud fraction from ERF-SDM and ERF-Kessler relative to values attained from other LES models and measurements. Both ERF-SDM and ERF-Kessler schemes successfully

Read the complete text