Spherometer (1911 Encyclopaedia Britannica article)

Encyclopaedia Britannica · 1911

Read Spherometer (1911 Encyclopaedia Britannica article) by Encyclopaedia Britannica (1911) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/britannica-1911-spherometer.txt.

Introduction

Spherometer is a term entry in the 1911 Encyclopaedia Britannica. It explains a fine tool for measuring the curve of a ball or lens. The tool can also gauge the thickness of a thin plate. Its core is a fine screw that turns in a nut on a small three leg stand.

The entry tells how the screw head is split into fine marks for close reads. A side scale counts the whole turns of the screw as it moves. To test a plate, the user sets the tool on a flat face and takes a read. The plate is then slipped in and a second read is taken. The gap between the two reads gives the depth of the plate.

Catalog record

CREATOREncyclopaedia Britannica
YEAR1911
COLLECTIONREFERENCE
FORMATTXT
FILE SIZE2 KB
VERSION1.0
LICENSEPublic Domain
RIGHTSPUBLIC DOMAIN
SOURCEWikisource — 1911 Encyclopaedia Britannica

Source: https://en.wikisource.org/wiki/1911_Encyclop%C3%A6dia_Britannica/Spherometer

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

right|190pxSPHEROMETER (Gr. σφαῖρα , a sphere, μέτρον , a measure), an instrument for the precise measurement of the radius of a sphere or the thickness of a thin plate. The usual form consists of a fine screw moving in a nut carried on the centre of a small three-legged table; the feet forming the vertices of an equilateral triangle (see figure).

The lower end of the screw and those of the table legs are finely tapered and terminate in hemispheres, so that each rests on a point. If the screw has two turns of the thread to the millimetre the head is usually divided into 500 equal parts, so that differences of 0.001 millimetre may be measured without using a vernier. A lens, however, may be fitted, in order to magnify the scale divisions. A vertical scale fastened to the table indicates the number of whole turns of the screw and serves as an index for reading the divisions on the head. In order to measure the thickness of a plate the instrument is placed on a perfectly level plane surface and the screw turned until the point just touches; the exact instant when it does so is defined by a sudden diminution of resistance succeeded by a considerable increase. The divided head and scale are read; the screw is raised; the thin plate slipped under it; and the process is repeated. The difference between the two readings gives
the required thickness. A contact-lever, delicate level or electric contact arrangement may be attached to the spherometer in order to indicate the moment of touching more precisely than is possible by the sense of touch. To measure the radius of a sphere—e.g. the curvature of a lens—the spherometer is levelled and read, then placed on the sphere, adjusted until the four points exert equal pressure, and read again. The difference gives the thickness of that portion of the sphere cut off by a plane passing through the three feet. Calling this distance h, and the distance between the feet a, the radius R is given by the formula \textstyle\text{R} = \frac{a^2 + 3h^2}{6h} .

Read the complete text