Rheological and Photoelastic Response of Hydrated Soft Granular Particles Journal: Soft Matter

Brandon Hayes, Krishnaroop Chaudhuri, Rylan Hodgson, Benjamin McMillan, Ruby Gans, Hale Burke, Stephanie McNamara, Thomas Chalklen, Nathalie M. Vriend · 2026

Read Rheological and Photoelastic Response of Hydrated Soft Granular Particles Journal: Soft Matter by Brandon Hayes, Krishnaroop Chaudhuri, Rylan Hodgson, Benjamin McMillan, Ruby Gans, Hale Burke, Stephanie McNamara, Thomas Chalklen, Nathalie M. Vriend (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2606-30913.txt.

Introduction

Brandon Hayes and eight colleagues lay out how to study soft particles suspended in fluid using light. Photoelastic particles change their optical pattern under stress. That lets experimenters photograph force chains inside the material and read off contact forces. The method is well developed for dry grains. Yet almost nothing exists for particles immersed in liquid, despite the many settings where wet grains matter. Wetting also changes the particles' own flow behaviour and optical response.

The authors take stock of where force resolution stands for immersed materials like these. They introduce techniques that measure how the flow behaviour and optics of wet particles shift. They also record practical notes for immersion experiments. The result is a framework for studying how fluid and grains interact in flat, immersed systems.

Catalog record

CREATORBrandon Hayes, Krishnaroop Chaudhuri, Rylan Hodgson, Benjamin McMillan, Ruby Gans, Hale Burke, Stephanie McNamara, Thomas Chalklen, Nathalie M. Vriend
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE39 KB
LICENSEhttp://creativecommons.org/licenses/by-sa/4.0/
RIGHTSCC BY SA
SOURCEarXiv

Source: https://arxiv.org/abs/2606.30913

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Rheological and Photoelastic Response of Hydrated Soft Granular Particles Journal: Soft Matter Brandon Hayes, Krishnaroop Chaudhuri, Rylan Hodgson, Benjamin McMillan, Ruby Gans, Hale Burke, Stephanie McNamara, Thomas Chalklen, Nathalie M. Vriend Abstract Photoelasticity is a qualitative and quantitative optical technique to image internal stress distributions in transparent materials. In the past few decades, discrete photoelastic particles have been used as a proxy for dry granular materials in both static, quasistatic, and dynamic analogue experiments. The technique allows the visualization of force chains, determination of the location and magnitude of contact forces, and outputs a stress tensor for each particle with shear and normal stress components. To date, little to no work has investigated photoelastic suspensions, where photoelastic granular particles are immersed in a fluid medium, despite its relevance in industrial and natural applications. The introduction of a fluid phase yields additional considerations in the rheological and photoelastic behavior of our proxy particles. In this manuscript, we summarize the state-of-the-art in resolving forces in immersed photoelastic granular materials. We introduce characterization techniques to probe changes in rheological and optical properties of hydrated photoelastic particles, and we report considerations for use of photoelastic particles in immersion-based experiments. We intend for this work to provide the leading framework to study the hydrodynamic interactions in 2D systems of photoelastic particles immersed in a fluid medium. 1 Introduction Flows of granular material sculpt the natural world and underpin countless industrial processes. While much progress has been made in understanding the rheological properties of these dynamic particle-based systems [ 1 , 2 ] , a complete mathematical description of their behavior remains elusive. The large number of grains and the complex physics governing their interactions pose significant challenges in modeling, numerically simulating, and experimenting with granular flows [ 3 ] . In particular, the inherently non-uniform distribution of stress within granular materials is central to understanding their behavior [ 4 ] , yet measuring interparticle forces from experiments is often not possible. In the simplest case of dry cohesion-free grains, photoelastic techniques have been used to probe force networks in quasi-two-dimensional granular material. Pioneering work by Behringer et al. transformed granular photoelasticity from a qualitative method [ 5 , 6 ] to a quantitative and powerful experimental tool [ 7 , 8 , 9 ] . Since then, the technique has provided insight into a wide range of granular phenomena [ 10 , 11 , 12 , 13 , 14 , 15 , 16 ] . Much modern photoelastic research relies on the inverse methods first introduced by Daniels et al. [ 17 ] , which have been shown to accurately quantify both normal and frictional forces acting on photoelastic particles [ 18 ] . These methods have recently been extended to account for inertial effects and deformed contact regions [ 19 ] , further broadening the applicability of granular photoelasticity to dynamic and highly confined systems. Although photoelasticity has been used to study the rheology of dry granular material [ 20 , 21 , 22 , 23 ] , many important granular flows in nature involve an interstitial fluid and their rheological behavior remains poorly understood. Particle-particle forces often dominate in these flows, yet, hydrodynamic stress can play a non-trivial role [ 24 ] . Despite the widespread use of photoelasticity in dry granular systems, its application to granular suspensions is largely unexplored. The experimental data unlocked by photoelastic techniques will likely provide unique insight into the dynamics of these suspension flows; however, a careful characterization of how key properties of photoelastic materials change during immersion in a fluid has not yet been performed. This limitation presents a significant barrier to extracting accurate, reproducible, and reliable particle-scale photoelastic force measurements from fluid-saturated granular flows. Mechanical Properties Optical Properties Material Shore-Hardness Elastic Modulus ( MPa ) Decay Time ( s ) Stress-Optic Coefficient ( Br ) Vishay (PSM-4) 60A 4.00 0.001 3175 Clear Flex 30 30A 1.16 0.895 2877 Clear Flex 50 50A 2.91 0.020 2430 WC-55 55A 2.55 0.112 2121 Acrylic 80D 3200 \approx 0 4.0 Glass n/a 70000 \approx 0 2.43 Table 1: Properties of Photoelastic Materials. Tabulates select mechanical and optical properties of common photoelastic materials. We define the decay time as the time required for the normalized tensile time-dependent stress relaxation modulus in the linear viscoelastic regime to decay to a value of 1/e. In this study, we use WC-55 which is highlighted in blue. The following material datasheets and the listed works are used to report properties for Vishay PhotoStress™, Clear Flex 30, Clear Flex 50, acrylic, and glass when not experimentally measured [ 17 , 25 , 26 , 27 , 28 , 29 ] . We note that Vishay PhotoStress™ materials have been discontinued and include it here for historical reference. 1 Br = 10 {}^{-12}\ m^{2}/N In this work, we investigate how hydration-induced swelling modifies the rheological and optical properties of a selected photoelastic material, specifically water-clear 55 (WC-55, BJB Materials, Tustin, CA, USA) polyurethane. WC-55 was selected due to its mechanical and optical properties as well as being a safer alternative to conventional Clear Flex 50. We consider photoelastic particles that have been submerged in water and quantify how mechanical properties such as the storage, loss, and elastic moduli are affected by swelling. In this paper, our findings show that the photoelastic response of the polymer is reduced by approximately 9\% and the elastic modulus is reduced by approximately 22 \% as particles are hydrated, and we identify key trends in the stress-optic coefficient response as a function of immersion time. We report that swollen photoelastic particles can be returned to near their initial pre-swelled states through annealing at 70\ ^{\circ}C . To our knowledge, this is the first study to systematically examine the mechanical and photoelastic effects of swelling in soft granular particles. These results provide practical guidelines for experiments with submerged photoelastic materials and establish a foundation for extending particle-scale force measurements to wet granular systems. 2 Materials and Methods 2.1 Choice of Photoelastic Material We provide a list of common photoelastic materials in table 1 and summarize their relevant mechanical and optical properties. The shore-hardness measures surface resistance to indentation, and is determined with a durometer. The elastic modulus measures the stiffness, or the material’s resistance to elastic deformation under load, and is calculated from tensile testing or rheometer data. Harder materials typically feature a higher elastic modulus, but they measure different properties. The decay time measures how fast the material relaxes, and is calculated as the time required for the normalized tensile time-dependent stress relaxation modulus to decay to a value of 1/e in the linear viscoelastic regime – discussed in detail in section 2.5 . Photoelastic calibration experiments, will which will be described in section 2.3 , characterize the stress-optic coefficient of a given material. This material property quantifies the sensitivity of a photoelastic material, as it is a measure of how many fringes will result from a given prescribed load. To select the “right” material to use for photoelastic experiments, one should consider the applied force and specific time scale featured. Large forces may deform a material beyond linearity and can even lead to fracture, invalidating the assumptions of standard quantitative

Read the complete text