Operational capabilities and on-sky performance of SAMOS at the completion of science commissioning
Massimo Robberto, Stephen A. Smee, Robert H. Barkhouser, Stephen C. Hope, John J. Piotrowski, Dana Koeppe, Mario Gennaro, Zoran Ninkov, Megan E. Donahue, Andrei Tokovinin, Randolph P. Hammond, Albert J. Harding · 2026
Read Operational capabilities and on-sky performance of SAMOS at the completion of science commissioning by Massimo Robberto, Stephen A. Smee, Robert H. Barkhouser, Stephen C. Hope, John J. Piotrowski, Dana Koeppe, Mario Gennaro, Zoran Ninkov, Megan E. Donahue, Andrei Tokovinin, Randolph P. Hammond, Albert J. Harding (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2606-30207.txt.
Introduction
Massimo Robberto and eleven colleagues report the commissioning of SAMOS, a spectrograph for the SOAR telescope. SAMOS observes the sky through a digital micromirror device. Thousands of tiny mirrors steer light toward its two light channels. Slit patterns can be reset almost at once between targets. It sits behind the SOAR adaptive module, which corrects ground-layer blur.
The full corrected field covers three arcminutes square on the sky. Low gratings span the visible to near-infrared range. High modes reach resolving power near ten thousand in selected bands. A fifth grating under contract will cover a calcium band used elsewhere. Commissioning set up the full workflow for observers. Mask making and automated reduction now run routinely. Science checks show it can observe many targets at once, with accurate calibration. SAMOS emerges as a flexible facility tool for SOAR.
Catalog record
| CREATOR | Massimo Robberto, Stephen A. Smee, Robert H. Barkhouser, Stephen C. Hope, John J. Piotrowski, Dana Koeppe, Mario Gennaro, Zoran Ninkov, Megan E. Donahue, Andrei Tokovinin, Randolph P. Hammond, Albert J. Harding |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 40 KB |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2606.30207
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Operational capabilities and on-sky performance of SAMOS at the completion of science commissioning Massimo Robberto, Stephen A. Smee, Robert H. Barkhouser, Stephen C. Hope, John J. Piotrowski, Dana Koeppe, Mario Gennaro, Zoran Ninkov, Megan E. Donahue, Andrei Tokovinin, Randolph P. Hammond, Albert J. Harding Abstract We present the operational capabilities and performance of the SOAR Adaptive Module Optical Spectrograph (SAMOS) at the completion of its science commissioning phase. SAMOS is a Digital Micromirror Device (DMD)-based multi-slit spectrograph and imager deployed behind the SOAR Adaptive Module (SAM) ground-layer adaptive optics system. SAMOS relays the full AO-corrected 3 ′ × 3 ′ 3^{\prime}\times 3^{\prime} field of view onto the central 1K×1K region of a large-format DMD. Each DMD mirror subtends 0.17 " × 0.17 " 0.17"\times 0.17" on the sky and directs light to a spectroscopic or a parallel imaging channel, allowing the generation of programmable slit-mask patterns with near-instantaneous reconfiguration. The spectrograph employs two low-resolution gratings covering the 4000–10000 Å wavelength range at resolving powers of R ∼ \sim 2500. High-resolution spectroscopy ( R ∼ 10 000 R\sim 10\,000 ) is available in two wavelength ranges, 4500–5150 Å and 6000–7000 Å, for a 0.33” slit width. A fifth grating, currently under contract, will provide spectroscopy R ∼ \sim 10,000 in the region of the Ca II radial velocity spectrometer of Gaia (8500–8750 Å). We summarize the operational workflow established during commissioning, including astrometric registration, DMD mask generation, simultaneous imaging and spectroscopy, and automated data reduction. Performance metrics derived from science-verification observations demonstrate the instrument’s multiplexing capability, wavelength-calibration accuracy, and end-to-end photometric calibration. These results establish SAMOS as a unique facility instrument combining adaptive-optics-assisted imaging, programmable multi-object spectroscopy, and rapid observational flexibility. a]Space Telescope Science Institute, 3700 San Martin Drive, Baltimore, MD 21218, USA b]Department of Physics and Astronomy, Johns Hopkins University, Baltimore, MD 21218, USA c]The Observatories of the Carnegie Institution for Science, Pasadena, CA, USA d]Rochester Institute of Technology, Rochester, NY, USA e]Michigan State University, East Lansing, MI, USA f]Cerro Tololo Inter-American Observatory, NSF NOIRLab, La Serena, Chile † † authorinfo: Further author information: send correspondence to M.R. M.R.: E-mail: [email protected]; Telephone: +1 410 338 4382, orcid: 0000-0002-9573-3199 Keywords: SAMOS, SOAR Telescope, Digital Micromirror Device, multi-object spectroscopy, adaptive optics, programmable slit mask, astronomical instrumentation, science commissioning 1 INTRODUCTION The combination of large imaging surveys, time-domain astronomy, and increasingly ambitious spectroscopic programs has created a growing demand for highly efficient multi-object spectroscopic facilities. Conventional slit-mask spectrographs provide excellent multiplexing capabilities, but require masks to be designed and fabricated in advance, making rapid reconfiguration impractical [ 3 , 2 ] . Configurable Slit Unit (CSU) spectrographs represent an alternative approach with greater versatility, but are typically limited to a few tens of slits and configuration times of several minutes [ 10 ] . Robotic fiber-positioning systems offer rapid target allocation over large fields, but are generally best suited to relatively sparse target distributions [ 7 ] . Integral-field spectrographs provide complete spatial information and are particularly effective in crowded environments, although typically over fields of only a few square arcseconds [ 1 , 8 ] . These complementary approaches leave a gap in observational capability for programs that require both high multiplexing and rapid reconfiguration over moderately large fields of view. Digital Micromirror Devices (DMDs) offer a compelling solution by enabling programmable slit masks that can be reconfigured in real time while retaining the advantages of slit-based spectroscopy [ 4 , 5 ] . In contrast to conventional slit-mask systems, a DMD can define hundreds of independently configurable slitlets within a single field and reconfigure them in seconds, providing an attractive combination of multiplexing efficiency, operational flexibility, and rapid response to evolving scientific priorities. The SOAR Adaptive Module Optical Spectrograph (SAMOS) was developed to address this need through the use of Digital Micromirror Device (DMD) technology [ 6 , 9 ] . Installed on the 4.1-m SOAR Telescope behind the SOAR Adaptive Module (SAM) ground-layer adaptive optics system [ 11 ] , SAMOS combines adaptive optics-assisted imaging with programmable multi-object spectroscopy over a 3^{\prime}\times 3^{\prime} field of view. Slit masks are generated electronically through DMD software control, enabling rapid reconfiguration and simultaneous operation of the spectroscopic and imaging channels. The completion of science commissioning marks the transition of SAMOS from instrument development to routine scientific operations. This paper summarizes the observing procedures, operational capabilities, and on-sky performance established during commissioning. We describe the operational architecture (Figure 1 ) and the end-to-end workflow, from target acquisition and programmable slit-mask generation to automated data reduction and calibration, and present representative science-verification observations that demonstrate the instrument’s multiplexing capabilities and overall performance. Figure 1: Simplified operational architecture of SAMOS. The AO-corrected field delivered by the SOAR Adaptive Module is projected onto a programmable Digital Micromirror Device. Individual mirrors direct light toward either the spectroscopic channel (SAMI) or the imaging channel (SISI), enabling simultaneous spectroscopy and imaging over the same field of view. 2 SYSTEM OVERVIEW SAMOS is an adaptive-optics-assisted multi-object spectroscopic and imaging system operating at the 4.1-m SOAR Telescope. The system combines a programmable Digital Micromirror Device (DMD), a multiplexed spectroscopic channel, a parallel imaging channel, and a dedicated software environment for target acquisition, slit-mask generation, calibration, and data reduction. Together, these elements provide a unified framework for rapid and versatile spectroscopic observations over a 3^{\prime}\times 3^{\prime} field of view. At the heart of the instrument is a Texas Instruments DMD that serves as a dynamically configurable slit mask. Individual micromirrors can be addressed electronically, allowing slit patterns to be generated and modified in real time without the need for mechanically fabricated masks. This capability enables rapid reconfiguration of target lists and observing strategies, allowing efficient response to changing scientific priorities and observing conditions. With reference to Figure 2 , the AO-corrected field delivered by SAM is folded and projected onto the DMD through a reimaging system. Each DMD mirror can be addressed to reflect light toward the spectroscopic channel. The complementary mirror state feeds a parallel imaging channel. Both beams pass through identical reverse-Schmidt collimators and then either a selectable VPH grating and camera optics for the spectroscopic channel, or a filter and camera optics for the imaging channel. As a result, SAMOS can perform simultaneous spectroscopy and imaging of the same field, supporting target acquisition, astrometric registration, slit verification, and science observations within a unified observing framework. A photograph of the optomechanical layout is shown in Figure 3 . Figure 2: SAMOS optical layout, top and side view. Figure 3: SAMOS mechanical layout as built, oriented to match the figure to the left. 2.1 Adaptive-optics-assisted operation SAM provides ground-layer adaptive-optics correction over the full 3^{\prime}\times 3^{\prime} field of view sampled by SAMOS. Under favorable atmospheric conditions, image quality in the red optical bands can approach 0.4^{\prime\prime} FWHM across the corrected field. The resulting improvement in image quality reduces source crowding, increases target contrast, and enables higher spectral resolution and lower sky background through the use of narrower slitlets without significant loss of throughput. These gains are particularly valuable for observations of crowded stellar fields and compact targets. The SOAR telescope is equipped with an internal calibration unit with quartz and arc lamps. SAM has two dedicated guide star probes located